How the CNC machine of the Franck system removes the corner deceleration

As long as the G08 P1 pre-reading is turned on, press the reset, it will automatically slow down, and the machine tool screw will not slow down.

It's going to bang and bang.

Frank. System: The connection of the servo is divided into type A and type B, by the servo amplifier.

Control on a short baton. The Type A connection is to connect the position feedback line to the CNC system, and the Type B connection is to connect it to the servo amplifier. Type B for 0i and recently developed systems.

oMost systems use type A. The two connection methods cannot be used arbitrarily, and it is related to the servo software.

When connecting, the last amplifier JXLB needs to be plugged into the FANUC (provided short plug, if forgotten, a 401 alarm will appear. In addition, it is recommended to use a servo amplifier to control two motors, and the large motor should be mated to the M terminal.

, the small motor is connected to the L terminal, otherwise the motor will hear an abnormal humming sound when it is running.

When the machine is relatively large, there must be corner deceleration, otherwise the torque of the motor will be too large when cornering, and the overload alarm, but if the machine is small, the machine tool manufacturer can be required to modify the parameters of corner deceleration appropriately.

I can't remember the parameters, though. You can ask the manufacturer.

As long as the G08 P1 pre-reading is turned on, it will automatically slow down, and if it does not slow down, the machine tool screw will bang.

Hello, glad to answer for you. <>

Frank CNC lathe reducer to change the parameters, 1, first open the Franke, enter the processing search environment, first create the processing program, create the cavity milling program, click: cutting parameters, button, enter the cutting parameter setting dialog box. 2. Next, click:

Corner, in: the shape of the toolpath at the corner, set all toolpaths smooth, 50% of the tool radius, step limit 150, at: the corner feed deceleration answer, the deceleration distance is the current tool, the world's deceleration percentage is set to 1 for the last step, the minimum and maximum corner angles are set to 10 degrees and 170 degrees, after the setting is completed, click OK, return to the pocket milling page, click the generate button, and generate the toolpath.

Complete the corner deceleration setting.

Frank CNC lathe reducer parameter adjustment: 1When adjusting the parameters, the core parameters should be checked first to ensure the correctness of the number of seepage of the parameters, so as to accurately set the parameters of the reducer, such as separation coefficient, extraction coefficient, motor revolution, etc.

2.After the parameters are determined, the reducer can be adjusted according to the parameters, and the parameters can be adjusted to the best performance state to achieve the best performance. 3.

Finally, after the parameters are adjusted, a comprehensive check should be done again to determine whether all the parameters are in a normal state to ensure the reliability and safety of the reducer. Accurate installation:1

First of all, before installing the adjustment reducer, the installation must be accurately corrected to ensure that the working data of the reducer is consistent with the actual parameters of the reducer. 2.In the process of installation, professional measuring instruments should be used to calibrate each parameter to ensure the accuracy of adjusting the reducer.

3.After installing the deceleration bypass, the parameters should be measured again to ensure that the installation is carried out correctly.

The parameters of the reducer of the Franck CNC lathe can usually be modified and adjusted through its control system, and the specific steps are as follows: enter the parameter setting interface of the reducer control system. Find the parameters that need to be modified, such as speed, torque, and so on.

Make changes as needed, and save the modified parameters. Restart the reducer to allow the modified rock disturbance to take effect. It should be noted that the parameter setting method of different models of Franck CNC lathe reducer may be different, and the specific steps may be adjusted.

If you are not familiar with the operation, it is recommended that you check the product manual or contact the manufacturer's customer service for consultation. At the same time, when modifying the parameters, attention should be paid to the influence on the lathe to ensure that the modified parameters can meet the requirements of the workpiece processed by the lathe.