Does the state support the establishment of a machine made sand plant? What procedures are required

Zhejiang, Fujian, Henan Province, and other Hunan, Hainan, Jiangxi and other places have successively introduced relevant policies to support the development of machine-made sand and encourage the comprehensive application of machine-made sand, so the state is very supportive of the establishment of machine-made sand plants.

1. Zhejiang Province

On August 7, the Zhejiang Provincial Department of Transportation held a promotion site, at which it was emphasized that it is necessary to fully understand the importance of the promotion of manufactured sand, strengthen the management and monitoring of the promotion of manufactured sand, and comprehensively promote the production and application of manufactured sand.

2. Fujian Province

In order to promote the development of the manufactured sand industry and solve the large gap of construction sand, Fujian Province is expected to establish 19 manufactured sand production bases to ensure the future demand for construction sand.

3. Henan Province

Wu Dingguo, Vice Governor of Henan Province, inspected the development of the machine-made sand project, gained an in-depth understanding of the machine-made sand process, and comprehensively promoted the application of machine-made sand. On November 7, Henan Province also held an on-site meeting for the promotion and application of manufactured sand to increase the application of manufactured sand and introduce relevant policies to support the development of manufactured sand enterprises.

The general sand production line is divided into five links: feeding, crushing, screening, sand making and sand washing, and the equipment required for these five links includes vibrating feeder, jaw crusher or cone crusher, vibrating screen, sand making machine, sand washing machine and belt conveyor and other auxiliary equipment.

Support is support, but the certificate is not easy to do. After a series of formalities are run, let's hurry up and do it, it's too profitable.

With the continuous expansion of national infrastructure construction, natural sand mining is limited, and the replacement of natural sand by manufactured sand has become an inevitable development trend.

For example, the 25 tons per hour machine-made sand plant is investigated and analyzed as follows: the cost of 25 tons per hour of machine-made sand. Manufactured sand formulation. In order to build a beautiful China, the whole industry should support and encourage machine-made sand.

1. What procedures are required for the machine-made sand plant?

1. The following procedures are required for the machine-made sand plant:

1) Name verification by the industrial and commercial department;

2) The Bureau of Land and Resources handles the mining license;

3) Approval by the Security Administration;

4) Environmental Protection Bureau Assessment;

5) The industrial and commercial department handles the business license;

6) The tax department handles the tax registration certificate.

2. Legal basis: Article 6 of the Administrative Measures for the Transfer of Prospecting Rights and Mining Rights.

The following conditions shall be met for the transfer of mining rights:

1) The mining enterprise has been engaged in mining production for 1 year;

2) the ownership of the mining right is not disputed;

3) In accordance with the relevant provisions of the State, the royalty of mining rights, the price of mining rights, the compensation fee for mineral resources and the resource tax have been paid;

4) Other conditions stipulated by the competent department of geology and mineral resources.

Before applying for the transfer of mining rights, a state-owned mining enterprise shall obtain the consent of the competent department of the mining enterprise.

Article 7. The transferee of the transfer of prospecting rights or mining rights shall meet the conditions of the applicant for prospecting right or mining right stipulated in the Administrative Measures for the Registration of Mineral Resources Exploration Blocks or the Administrative Measures for the Registration of Mineral Resources Exploitation.

2. What are the environmental protection requirements of the machine-made sand plant.

The environmental protection requirements of the manufactured sand plant are as follows:

1. The machine-made sand factory should take closed measures for crushing, screening and conveying and other production links; Crushing and screening processes, raw material yards, finished product warehouses and other areas are fully enclosed and shall not be operated in the open air;

2. The raw materials and products of the machine-made sand factory shall be closed and stacked or effective covering measures shall be taken, and dust removal, dust suppression and dust collection devices shall be set up at dust points such as crushing, screening and conveying transfer stations, and the dust emission concentration shall meet the relevant provisions of the comprehensive emission standards for air pollutants and meet the environmental protection requirements of the area where the plant is located;

3. For dust places with unorganized emissions, dust-proof measures such as spraying, sprinkling, and sealing should be taken. The solid waste generated by the production of manufactured sand that is not comprehensively utilized should be disposed of in a centralized manner in accordance with relevant specifications. The machine-made sand production line must be equipped with noise reduction measures such as sound insulation, sound elimination, vibration reduction, and vibration isolation.

Legal Analysis: Starting a manufactured sand plant generally requires the following procedures:

1.The name of the industrial and commercial department is verified.

2.The Bureau of Land and Resources issues a mining license.

3.Approved by the Security Administration.

4.Environmental Protection Agency Assessment.

5.The industrial and commercial department handles the business license.

6.The tax department handles the tax registration certificate.

7.Purchase sand making equipment.

Legal basis: Company Law of the People's Republic of China

Article 23 The establishment of a limited liability company shall meet the following conditions:

1) The shareholders meet the quorum;

2) There is a capital contribution subscribed by all shareholders in accordance with the provisions of the company's articles of association;

3) Shareholders jointly formulate the articles of association;

4) Have a company name and establish an organizational structure that meets the requirements of a limited liability company;

5) Have a company domicile.

Article 76 The establishment of shares shall meet the following conditions:

1) The promoter meets the quorum;

2) The total amount of share capital subscribed by all the promoters in accordance with the provisions of the articles of association of the company or the total amount of paid-in share capital raised;

3) The issuance and preparation of shares comply with the provisions of the law;

4) If the promoter formulates the articles of association of the company and adopts the method of fundraising, it shall be approved by the founding meeting;

5) Have a company name and establish an organizational structure that meets the requirements of the shares;

6) Have a company domicile.

Legal analysis: according to the relevant policies and departments to understand, is still approved, through the electronic mining license, can fully reflect the attention and attention to the development of the sand and gravel industry, generally speaking, the mechanism of sand procedures can be done, if there is no approval procedures, it may be a site selection problem (regional selection shall not be built), environmental protection measures are not enough, operator problems (to hold a certificate), safety issues, etc., will lead to can not be done.

Legal basis: "Measures for the Administration of Mineral Resources Exploitation Registration" Article 7 The validity period of the mining license shall be determined according to the scale of mine construction: if it is large-scale or more, the mining license shall be valid for up to 30 years; For medium-sized ones, the mining license is valid for up to 20 years; For small ones, the mining license is valid for up to 10 years.

If it is necessary to continue mining after the expiration of the mining license, the mining right holder shall go through the renewal registration procedures with the registration authority 30 days before the expiration of the mining license.

If the mining right holder fails to go through the renewal registration formalities within the time limit, the mining license shall be revoked by itself.

Legal analysis: The main national or industry technical standards related to manufactured sand are: GB T14684-2011 "Construction Sand", GB T14685-2001 "Construction Pebbles, Crushed Stone", JGJ52-2006 "Quality Standards and Inspection Methods for Sand and Stone for Ordinary Concrete", JGJ T241-2011 "Technical Specifications for the Application of Artificial Sand Concrete", DB50 5030-2004 "Technical Regulations for the Application of Machine-made Sand Mixed Sand Concrete" (Chongqing), JT T819-2011 "Machine-made Sand for Cement Concrete in Highway Engineering", DBJ52-55-2008 "Technical Regulations for High-strength Concrete for Highway Machine-made Sand in Guizhou Province", and JTGE42-2005 "Test Regulations for Aggregates in Highway Engineering".

Legal basis: Article 2 of the Standardization Law of the People's Republic of China The standards (including standard samples) mentioned in this law refer to the technical requirements that need to be unified in the fields of agriculture, industry, service industry and social undertakings.

Standards include national standards, industry standards, local standards, group standards, and enterprise standards. National standards are divided into mandatory standards and recommended standards, and industry standards and local standards are recommended standards.

Mandatory standards must be enforced. The State encourages the adoption of recommended standards.

Legal analysis: The specifications of manufactured sand are divided into four types: coarse, medium, fine and extra-fine according to the fineness modulus (mx).

The fineness modulus of coarse sand is: , the average particle size is above;

The fineness modulus of medium sand is:, the average particle size is, the fineness modulus of fine sand is:, the average particle size is;

The fineness modulus of extra-fine sand is: , the average particle size is below;

The larger the fineness modulus, the coarser the sand; The smaller the fineness modulus, the finer the sand.

Legal basis: Article 490 of the Civil Code of the People's Republic of China Where the parties conclude a contract in the form of a written contract, the contract shall be established when both parties sign, affix their seals or press their fingerprints. The contract is formed when one of the parties has fulfilled its primary obligations and the other party has accepted it before signing, stamping or fingerprinting.

When laws or administrative regulations stipulate or the parties agree that a contract shall be concluded in written form, and the parties do not use the written form but one party has performed its main obligations and the other party accepts it, the contract shall be established.

Legal analysis: written application report for project construction, "State-owned Land Use Certificate" or collective construction land lease contract (location of the proposed distribution site), legal person information and feasibility study report, type test report of mineral source stone and machine-made sand.

Legal basis: Regulations on the Registration and Administration of Industrial and Commercial Enterprises Article 2 The following production and business units in the industry, transportation, construction, commerce, foreign trade, catering, service, tourism, handicraft, and repair industries (hereinafter collectively referred to as industrial and commercial enterprises) shall be registered in accordance with the provisions of these Regulations: (1) State-owned industrial and commercial enterprises; (2) cooperatives and other industrial and commercial enterprises under collective ownership; (3) Joint ventures or joint ventures; (4) Industrial and commercial enterprises belonging to the departments of railways, civil aviation, posts and telecommunications, and other public utilities.

Other industrial and commercial enterprises that the people of provinces, autonomous regions and municipalities directly under the Central Government deem necessary to go through registration.