What should I do if I need to restore my computer after it is upgraded?

You are upgrading to a 64-bit system, and the processor needs to be 32-bit, but no.

What did you upgrade? Now it reminds you that you don't have a 64-bit processor, your computer should be old enough...

Your computer configuration is too low, it does not support 64-bit software, and you can only reinstall the 32-bit operating system. There is no need to ask such a simple question, there is no point.

Follow the prompts to restore the system first, and then reinstall the system if it doesn't work.

Recently, after a friend updated and upgraded the system, he thought it was better before the update, and wanted to know how to restore the original system.

Let's take a look at how to restore the original system of the computer!

1. Press and hold win+i at the same time, open the settings page, click [Update and Security] 2, then, select and click Restore on the left, click [Restart Now] 3, after that, click [Troubleshooting] - [Advanced Options] 4, continue to click [See more recovery options] - [Revert to previous version] 5. After entering the account selection page, click to select the appropriate account, generally the default administrator

6. Then, enter the account password, click [Continue], if you don't have a password, you can click directly.

7. Finally, click [Revert to previous version] and follow the system prompts.

Friends who often patch and update the win7 system sometimes encounter the problem that the computer is stuck in the interface of win7 restore changes, so what should I do if the computer has been restoring the changes? Let me take you to find out, please see below.

1. Restart the computer as soon as it starts, press F8 to select to enter the safe mode, generally in the state of entering the safe mode, waiting will not be stuck, this is a personal measured experience, waiting will not exceed 20 minutes, and then it will enter the safe mode, as long as you restart the computer again, you can enter the system normally.

2. If your system is not genuine, it is recommended to turn off the update.

3. We can open the control panel, click "windowsupdate", then click "change settings", select "never check for updates" in the important update there In this case, the system will prompt to turn off automatic updates, you can turn it off, hit back to open the operation center - security, find "windowsupdate", and then click "turn off information about windowsupdate" If necessary, we can also turn off the automatic update service, The way is to click Run in the start menu, if it is not running, you can press the Win key and R key on the keyboard at the same time to bring up the run, type "find WindowsUpdate", double-click, change the "Startup Type" to "Disable", and then click "Stop" Note: Closing the service can cause the 360 patch to be installed and detected as undetectable.

There are basically 4 main reasons for this situation:

1. The computer mistakenly deletes or destroys the system files. Then the system needs to be reinstalled.

2. It may be caused by the compatibility conflict between the installed software or plug-ins and the system. You can force shut down 3 times, and then restart the computer to bring up the recovery screen - select safe mode - and then the computer will restart into safe mode, after entering safe mode, open applications and functions, and delete the recently installed software or plug-ins.

3. It may be that the system suffers from malware or computer virus, and the virus causes the system to malfunction. Force shutdown 3 times, then restart the computer will appear recovery screen - select safe mode - then the computer will reboot into safe mode, after entering safe mode, use security software to disinfect.

4. It may be a disk problem. You need to check the disk, and if there is a problem with the hard disk, you can replace it with a hard disk.

If the computer is restored, this can be replied to according to its menu prompt, which is equivalent to redoing the system.

Generally, there is a problem with the way the system is started. This requires the corresponding installation disk or the operation according to the prompts, if it really doesn't work, you can only reinstall the system.

The next system is a U disk reinstallation system.

This is obviously caused by an abnormal shutdown.

When the computer slows down, runs the program stuck, or is poisoned, many people will choose to reinstall the computer system, if necessaryComputer system recoveryIn this case, what should I do, if the computer system is restored, what problems will occur, then follow me to find out!

1. How to get computer system recovery:

1. If it is some beginner computer users, when the computer is running slowly, or when the machine is stuck, and wants to reinstall the computer system by themselves, how should they get it, you need itComputer system recoveryNormal, then you need to use some software, and Kingsoft Guardian has the conditions for computer system recovery, no need for system installation disk, no need for hardware drive disk, no need for U disk to install the system, no need to re-patch the vulnerability, and can also completely save and restore personal data for computer users.

2. When restoring the computer system, the first thing is to back up the data, before restoring the computer system, you can back up the data and files in the computer disk, some people do not know that the computer system needs to be backed up for recovery, resulting in the loss of data and files, so we have to do this little by little.

3. Explain the "system reset" of Kingsoft GuardComputer system recoveryfirst, make a data backup, check the data files that need to be backed up, and then save the backup.

4. To install the system, there is no need for system disk, installation files or hardware driver files in the process of using Kingsoft Guard's "System Reset", and the system can be reinstalled without a disc drive or a U disk.

5. When recovering the computer system, there will be some built-in software management tools that can help users quickly, batch and automatically install commonly used software, such as antivirus software, compression software, input method, even communication, network software and other software. It is a very easy way to use Kingsoft Guardian's software to recover the system.

2. What will happen after the computer system is restored?

ConductedComputer system recoveryAfter that, the newly added files will be deleted, and the newly installed software will not be displayed in the added and deleted software, and there will be no icon even on the desktop, and you will not be able to see its shortcut in the start menu, but these hidden files will be stored in your computer disk, and there will also be its files and programs, but it will not have any effect when you use it, and the backup data will not be lost.

You can refer to the relevant knowledge of how to get it and what will happen after the computer system is restored. Computer system recovery is actually to reinstall the computer system, under normal circumstances, the reinstalled computer system is better than the previous one, otherwise it will lose the effect of reinstallation.