What to do if your computer suddenly appears and needs to be repaired

Press and hold the power button for 10 seconds while the system boots up, and you can see that there is a repair button. Click Advanced OptionsSelect "Reset this computer" and delete everything, detailed steps:

1. Press and hold the power button for 10 seconds when the system starts to force off the system start-up. If the system starts up quickly (usually takes about 10 seconds), press the power button for 4-6 seconds.

2. At this time, you can see that there is a repair button. You can click Repair. When the repair detection is complete, two buttons will be prompted. Choose whether to reboot or enter advanced options. Click "Advanced Options" here.

3. Once you click on the advanced options, the option to reset this computer will be displayed on the screen. For now, you just need to select "Reset this computer" in the interface.

4. Click to delete everything.

5. You can re-enter the system.

System Repair:

First, enter safe mode and remove the recently installed driver software.

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then select [Startup Settings], ., .,Select [Start], click the safe mode environment you want to enter, and in general, it is recommended to select (4) to enable safe mode.

Second, with the Auto-Repair feature, you can detect and resolve certain system issues that prevent Windows from booting.

To run automatic repair, follow these steps:

Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.

You can press and hold the power on button until the machine is powered off, then turn it on again, and then power off again, repeat 3-5 times until you enter the recovery mode as shown below.

From the Select options screen, tap or click Troubleshoot.

Tap or click Advanced options, and then tap or click Automatic repair.

Auto-Repair will launch and attempt to fix Windows to prevent loading.

If the above still doesn't work, try restoring the system, or reinstalling the system.

The automatic repair of the computer boot prompt is a headache, I believe most users have encountered it, what is the way to solve it? The first time a computer novice faces this failure, it is inevitable that he will be at a loss. If you are afraid of losing your computer data if you do it casually, what should you do to fix it?

Here's how:

1. Click [Advanced Options] [Troubleshooting] [Advanced Options] [Startup Settings] [Restart] Press F4 on the keyboard in the figure above.

3. Turn off the computer completely (confirm the complete shutdown before operating), press the power button and quickly click F11 immediately.

4. After entering the F11 interface, select [Troubleshooting] [Advanced Options] [System Restore].

5. After the display of "Preparing for System Restore", the Select Account screen will appear. Click on the account name and enter the password for the account. Select a point in time before the problem occurs and follow the prompts to complete the operation.

To sum up, the solution to the problem of the diagnostic automatic repair interface has been stuck in the diagnosis automatic repair interface when the computer is turned on, this problem is relatively common, don't worry too much, you can fix it according to the above steps!

Answer pro, it may be that there is a problem with the boot file of the C drive, you can try to press the F8 key non-stop until a black selection menu appears, that is, the selection menu of safe mode, in this menu of safe mode, there are several options, the first item is to enter the safe mode, the other method, when the system boots up, when the system selects to enter the menu, keep pressing the crtl key on the keyboard, and a safe mode selection menu will also appear, You just need to click on it and you're good to go.

Method 1: Reset your computer.

1. First of all, we restart the computer repeatedly, until the diagnosis and repair appears "troubleshooting", we click on it.

2. After that, we click Reset This Computer.

3. We can choose to keep the file or delete all the content, click Initialize after selection.

1. Disconnect from the network. Unplug the network cable if it is wired, and disconnect the wireless network if it is wireless, so as to ensure that the computer is not in a network state. The purpose of this is to ensure that the system is not automatically connected to the Internet for upgrades when it is turned on.

2. If it is a desktop, it is recommended to open the chassis and pull out the lithium battery on the motherboard. You can also try to ignore this step.

The notebook doesn't have this, so it's not needed) Of course, this step may not be needed. The reason is because the battery is to store some information after the computer is turned off, which may be related to the problem.

3. Restart the computer, press and hold F8, select "Safe Mode" Enter (of course, this step may not be needed, you can log in directly to Windows to try to see), the interface will also appear "Configure Windows Update failed, restore the update, do not shut down", wait for a while, it will automatically shut down later, the computer will automatically restart to enter Windows login, and "Configure Windows Update Update 35%, of course, this value may be different, Wait a while and you will be able to enter the system smoothly.

Boot the computer and keep clicking the F8 key to enter the system operation menu, select "Safe Mode", if you can enter it successfully, click "Start" "All Programs" "Accessories" "System Tools" "System Restore", the "System Restore dialog box" appears, and select "Restore my computer to an earlier time". In this way, you can use the built-in system restore function of the Windows system to restore to a restore point when the computer was able to boot normally.

If the computer has been in a state of repair, it is likely that it is caused by a computer system failure, you can try to restart the computer, press the F8 key, and then select Normal Boot.

1.Step 1: Click on the Advanced Options button on the right side of the Auto-Repair interface2Step 2In the Advanced Options interface, click on System Restore, and then click on Erase Everything3Step 3In the option to reset this PC, select all the drives and click Clean Drive Completely.

4.Step 4Click Initialize on the right side and wait for the computer system to be restored.

When encountering a prompt that the computer is turning on and showing that it is preparing for automatic repair, it is recommended to wait for the automatic repair of the system to be completed, and try to repair it first.

This situation is a system problem, you can only wait for it to be repaired, if it doesn't work for a few hours, just restart it, after restarting the system can only reinstall the system!

It may be because the computer is frozen, or the computer needs to repair too many things, and your computer system is too slow, so it will keep showing repair, at this time you had better not operate the computer.

When the brain is being repaired, you can try to force shut down or force restart.

The computer keeps "fixing"! The note is no longer repairable!

Repair is actually a system recovery using the system's "backup" of resources! And these resources are "damaged, lost" and cannot be repaired!

Now there is only one workaround for re-"doing the system"!

If this happens, it means that your current computer has some failures, so you should upgrade the system or clear the garbage, so it's better to give it a try?

Answer 1, in the Windows 7 operating system, boot into safe mode is similar to XP, let me talk about the method of entering safe mode in Windows 7 mode. First of all, if you feel that there is a problem with the system, or there is some software that cannot be uninstalled, you need to go to safe mode to fix it. Then please reboot first.

2. Before the system starts, keep pressing the F8 key until a black selection menu appears, that is, the selection menu of safe mode.

3. In the menu of this safe mode, there are several options, and the first item is to enter the safe mode.

4. When the system is turned on, when the menu that the system selects to enter appears, keep pressing the CRTL key on the keyboard, and a safe mode selection menu will also appear, you just need to click to enter.

Hello, welcome your inquiry. The reason for this is that the system files of the computer are corrupted, resulting in the computer not being able to boot normally, so the computer needs to be repaired when the computer is turned on. Here's how:

1.Restart the boot interface, 2Reboot the notebook again, generally press F2 to enter the BIOS, and press the DEL key on the desktop to enter the BIOS; 3.

Press the keypad up, down, left and right keys to select each navigation clip, generally in"security"The Secure Boot option can be found in the navigation folder; 4.Then press"f10"button and press Enter to confirm to save the BIOS configuration. After that, the computer will be restarted.

can be effectively solved.

Hello, welcome your inquiry. The reason for this is that the system files of the computer are corrupted, resulting in the computer not being able to boot normally, so the computer needs to be repaired when the computer is turned on. Here's how:

1.Restart the boot interface, 2Reboot the notebook again, generally press F2 to enter the BIOS, and press the DEL key on the desktop to enter the BIOS; 3.

Press the keypad up, down, left and right keys to select each navigation clip, generally in"security"The Secure Boot option can be found in the navigation folder; 4.Then press"f10"button and press Enter to confirm to save the BIOS configuration. After that, the computer will be restarted.

can be effectively solved.

Pressing f2 is useless.

You can also press ESC on the keyboard to enter the motherboard settings after entering the interface, then press F8, and select P2 in the bootmenu to boot. Finally, restart the computer to fix it successfully.

Under normal circumstances, the repair can be successful. A significant number of computers can be forced to boot directly. It can also be returned to normal after startup.

Pressing esa doesn't work, pressing f8 and there's a black bar flashing from top to bottom.

ESC is a system paralysis, you can force a shutdown, restart to try. If it doesn't work, you need to reinstall the system.

Turn the power button on and off a few times, turn it back on, automatically repair--- advanced options--- troubleshooter --- reset this PC to try.

The method is as follows: 1. After starting the repair and entering the system normally, right-click on the computer on the desktop, select Properties, and then click on the advanced system settings at the bottom left, as shown in the figure: 2. Click to pop up the system properties window, then click on the advanced items, and then click on the settings in the "Startup and Fault Recovery" column below.

The maintenance of computer software mainly includes the following points: (1) Back up all system software. When encountering an abnormal situation or some accidental reason, the system software may be corrupted, and the software system needs to be reinstalled, and if there is no backup system software, it will be difficult for the computer to resume work.

2) Backups should also be made for important applications and data. (3) Always pay attention to cleaning up useless files on the disk to make efficient use of disk space. (4) Avoid illegal software copying.

5) Frequent testing to prevent computer infection with viruses. (6) In order to ensure the normal operation of the computer, use software tools to protect the system area when necessary. In short, the use of computers is inseparable from maintenance, and it is necessary to pay attention to the maintenance of both hardware and software.

Method 1: 1. Insert the Windows installation disc and boot the computer from the installation disk.

2. After launching, you can enter the installer interface and click "Repair Computer" in the lower left corner.

3. Select "Command Prompt" in the advanced options.

4. Enter the command prompt and enter **:sfc scannow and wait for the repair to be successful.

5. If it still doesn't work, you need to use the second method to enter other commands.

bootrec /fixmbr ”

bootre /fixboot ”

bootrec /scanos ”

bootrec /rebuild”

2. After the input is completed, enter "chkdsk c: f x r" and press enter to confirm, and the problem can be fixed.

Fortunately, this is just a system problem, and the hardware should be fine. Make a boot USB disk on another computer,Then run on this machine,Insert the USB disk before booting,Can you guide into the installation interface for the first time?,If not, it's complicated,You need to press the notebook's may be F11 or 12 keys to load out the startup item,Select to this USB disk to start PE mode。

Summary. Dear, I'm glad to answer for you: What to do if the computer appears to be repaired immediately Answer:

Dear,Hello,Immediately press f8 to the advanced option to let go,Select "The latest correct configuration" Enter repair,Not yet press f8 to enter the safe mode to restore the system or reinstall the system after the software is hard,There is such a problem with software conflict、The driver is not suitable、Caused by system problems,You can restore the system in safe mode,Or not reinstall the operating system really can't reinstall the system,If you can't reinstall yourself,Go to the repair there to find someone to help you, If you can't turn on the computer by any method, this is a sudden shutdown, resulting in disk damage If you have any questions, you can feedback to me in time! Thank you for your patience. The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy! <>

What to do if the computer appears to be repaired immediately.

I've shut down and rebooted, refresh still has this prompt.

Dear, I'm glad to answer for you: What to do if the computer appears to be repaired immediately Answer: Dear, hello, press f8 immediately after booting to the advanced option appears in the let go, select "the latest correct configuration" Enter to repair, not yet press f8 to enter the safe mode to restore the system or reinstall the system after the software is hard, such a problem is caused by software conflicts, inappropriate drivers, system problems, you can restore the system in safe mode, or you can't reinstall the operating system really can't reinstall the system, If you can't reinstall it yourself, go to the maintenance there to find a repairer to help you, it should take a little to spend it, if you can't turn on the machine by any method, this is a sudden shutdown, resulting in disk damage If you have any questions, you can give me feedback in time!