My computer s RAM is 785MB, why is it still very stuck

First of all, you have to tell me what is your system? If you use such memory to run Windows Vista, then you are not a strong "machine" difficult? Vista requires at least 1GB of RAM.

If it's xp, then you'd better check your computer for viruses, if not, then you may not have optimized the system, after all, there are a lot of things in the system that we don't use very much but will start automatically with the boot, so it's best to have the whole "optimization master" or something, and then let some repair the computer optimize the coms on your machine. Then you see if the capacitor of the motherboard (just like that diode) has burst pulp, if there is, then take it to repair (when repairing, choose some stores that look very messy, and the corners are full of hosts or accessories, so that JS is really repaired, other JS, eight achievements to hack you!) )。

Is it a CPU in the end, don't tell me your CPU is Ben San? I'm X, it's more ...... than the vistaHowever, if it is not, then reinstall the system, because the system will be very stuck after more than a year of continuous use. There is also the C disk don't put too many things, I personally recommend that you don't put anything else in the C disk except for installing the system.

That's it, you try it first, and then if it doesn't work, just change the machine.

The performance of the computer is the bucket principle,That is, which one is the lowest to determine the overall performance,If your graphics card is not good,Even if it is a dual-core plus two G memory to play large games or a card,Or you can't turn on special effects,If you want to improve performance, you should start from the weakest link,You should also start according to your needs,Look at what you focus on office,Study or games, etc.。。。

Your memory is a match! If different types and different brands of memory are mixed, there will be a jam, or there are incompatible devices and drivers in your computer, it is recommended to check it.

2G is the mainstream memory capacity in the future.

How can there be a 785M memory module! You're 1G memory, and then the integrated graphics card splits the 256M memory, so the card is a graphics card, not a memory thing, just change the graphics card.

Remove a memory module

It's not that there is more memory, but it needs to be compatible.

And the configuration of memory is generally multiplied, for example, 128 256 512 1g....

If you plug in two and are not compatible, then it is better to plug in one 512.

What's the use if your CPU can't keep up with the large memory?

Big Brother: The computer card is not necessarily a memory problem.

Mine is still yes, and sometimes it's stuck.

What kind of card do you say?

System or software or a game or something?

Does 40g refer to your overall hard drive size? If yes,Then it is inferred that your configuration is at most 04 years,Your memory is also likely to be the DDR generation266Up to 333,The capacity may be 128M,256M is not very likely,In this case, adding a memory module of the same frequency,It is possible to make the whole machine faster,But there are two difficulties,One is that it is difficult to find the right memory,As long as you are afraid that you can't buy it,In addition, even if you add it, it can become faster,But I don't think there is much need to upgrade such an old computer,It's better to change to a new machine。

Your situation is unlikely to improve.

Adding a memory module becomes faster, but you also need to check the space in the C drive, if it is too small, it can also make the computer very stuck.

Very old memory module,PC133 bandwidth is only 64bitx 133 8=,And now the bandwidth of single-channel DDR3 1600 has 64bit x1600 8=,The gap between Qi and defeat is obvious,PC133 is the oldest memory bandwidth is the largest,But it can only be equipped with P3 or JS type P4,It's okay to play Win98,WinXP After the era, this memory bandwidth can not make the system run quickly,And blind and no new motherboard will use the grinding cavity This old-fashioned internal Xuan。

What other specifics? Is the system too high? (Can't keep up with the configuration?)

Are there any redundant daemons? Hmmm......The most straightforward way to do this is to expand the physical memory to reduce the pressure on the PF, but pay attention to whether the CPU can be used after expanding the memory. Another important point is ......Whether it is poisoned or not.

It is estimated that the compatibility is not good, where to buy it and let them change it for you, it is best to move the host.

The reasons why your computer slows down are probably as follows:

Hello, landlord, small memory will cause computer stuck is one of the reasons.

Reasons for computer lag:

1. There is a lot of computer garbage.

2. There is malware on the computer.

3. There is a problem with the computer's memory.

4. Computer hardware problems.

5. The software or driver is not compatible with the system.

The speed of the machine is not only related to the memory! Of course, depending on your configuration, it's not a problem with CPU and heat dissipation.

Maybe there's too much software.

There are many startup projects.

You check for viruses, or clean up the size of the partition where you installed the system, and your actual memory should be proportional to your virtual memory.

When the memory is insufficient, the operating system maps a portion of the hard disk to memory (i.e., virtual memory), which is transparent to the program, that is, to the program, which it uses all the time"Memory", even if the content is actually on the hard drive. The crux of the problem is that the read and write speed of the hard disk is much lower than the memory, so when the program uses it"Memory"In this case, the operating system will read this content out of the hard disk and put it into memory, and at the same time take out the data that is not used in the memory and store it on the hard disk (note that it is done because the actual memory is insufficient).This exchange process is very time-consuming (the speed gap with direct reading and writing memory is very, very large), so when the program requests to read and write a piece of memory, the system must first perform a page swap, and then the program will be affected, which shows that the response speed is reduced a lot.