Briefly describe the dangers of the beltman position

The main danger of the belt worker's position is that it is easy to be strangled by the belt in operation.

The main dangers are as follows:

1. When doing cleaning work, you should avoid standing on the belt to clean up, so as to prevent being knocked down by the belt that suddenly turns, and causing injury.

2. Keep a certain distance from the supporting roller at the lower part of the belt to prevent the supporting roller from twisting the clothes and causing injury.

3. Keep a certain distance from the belt in operation to avoid being scratched by the belt that suddenly breaks.

1. Belt wear exceeds the limit, and the belt driver of each shift should carefully check the wear and tear of the belt, and if the belt is found to be a large breach or the edge is worn through, the belt card should be played or replaced in time.

2. The belt driver should take care of the belt and adjust it in time when the belt is deviated.

3. Belt protection failure Check the sensitivity and reliability of the protection actions such as rope protection and deviation switch every day, and replace them in time when they do not act or the action is not sensitive.

4. Ice in the belt corridor Do a good job of anti-freezing measures and clean up the ice in time when it is found.

5. Cleaner failure Each belt driver should check the cleaner and replace it in time if the belt cleaner is out of order.

6. Floating coal accumulation Each shift is equipped with 2 special personnel to clean up, one person to take care of it, one person to clean up, and coal dust accumulation is strictly prohibited.

7. Wear and damage of the belt buckle Each shift should carefully check the belt buckle and report the replacement treatment in time if the belt buckle is worn or damaged.

8. It is strictly forbidden to work after drinking.

9. Straddling the belt After opening the belt, it is strictly forbidden for personnel to walk or cross the belt and hang warning signs.

10. Plugging the coal nozzle Immediately stop the upper and lower belts and dredge the coal nozzle in time and do a good job of safety monitoring.

11. Open flame It is strictly forbidden to open fire in the workplace.

12. If the bearing temperature is too high, clean and lubricate regularly, measure the bearing temperature once per hour and record it, and report and clean the oil when the temperature is too high.

13. Deformation and loosening of coal retaining plate and coal retaining skin should be carefully inspected in each shift, and fastening or replacement should be done in time when loose or deformed is found.

Falling objects, smashing, falling, strangulation by belts, bruising.

Dear, for you to inquire about the safety risks of the belt worker are as follows: 1, the belt wear exceeds the limit, each shift of the belt driver to carefully check the wear of the belt, found that the belt has a big breach or the edge of the wear to play the belt card or replace 2, the belt deviation belt driver to take care of the belt, deviation in time to adjust the deviation 3, belt protection failure every day to check the rope protection, deviation switch and other protection actions of the sensitive and reliable, when not acting or the action is not sensitive to replace in time 4, the belt corridor ice to do anti-freezing measures, Find the ice and clean it up in time 5, the cleaner is out of order, and the belt driver in each shift should check the cleaner, and replace the belt cleaner in time if it is found to be out of order. 6. Floating coal accumulation Each shift is equipped with 2 special personnel to clean up, one person to take care of, one person to clean up, it is strictly forbidden to accumulate coal dust 7, belt buckle wear and damage, each shift to carefully check the belt buckle, and find that the belt buckle is worn or damaged to be reported in time to replace the belt judgment treatment 8, it is strictly forbidden to be stupid and drunk on duty 9, across the belt After opening the belt, it is strictly forbidden to wash the personnel walking or across the belt and hang warning signs.

Kiss! Hello, I'm glad to answer your <>

A pro-belter is a worker who is responsible for maintaining and upkeeping conveyor belt equipment and operating production equipment. Due to the mechanical operation and aerial work, there are certain risk factors in the working environment of belt workers, mainly including the following aspects: 1

Risk of mechanical injury: Beltworkers need to come into contact with mechanical parts when overhauling conveyor equipment and replacing belts, which can cause mechanical injuries if not handled correctly. 2.

Risk of electrical injury: The conveyor belt equipment needs to be connected to the power to operate, and the beltman may come into contact with the live parts during operation, and electrical injuries may occur if the safety is not taken into account. 3.

Fall from height: Belt workers need to enter the heights when overhauling and replacing conveyor belts, and fall from height accidents may occur if not operated correctly or the equipment is unstable. 4.

Failure caused by improper maintenance: Belt workers need to carry out regular maintenance of conveyor belt equipment, if the operation is not carried out in accordance with the specified operation procedures, it may lead to equipment failure and affect production safety. In order to ensure their own safety and smooth production operations, belt workers need to strictly abide by the work specifications, wear personal protective equipment correctly, maintain the safety and stability of equipment, pay attention to electrical safety, and regularly receive relevant safety education and training.

Hope mine can help you <>

Do you have any other questions?

1. Prevent and control hazards in accordance with the corresponding specifications, conduct regular inspections of hazards, review suspicious points, and eliminate hidden dangers in time;

2. Do not violate the rules and regulations, do not operate in violation of regulations, and do not violate labor discipline;

3. When carrying out related operations, two people should be in a group;

4. The power supply should also be cut off for temporary shutdown or short rest;

5. Avoid flammable and explosive materials when laying the line, and the safety distance meets the requirements of the corresponding national specifications;

6. When the theoretical knowledge is solid and the practical experience is insufficient, it can be led by an experienced master for a period of time;

7. Regular manufacturers should be selected for electrical products, and no products should be used;

8. Strictly follow the provisions of the current national electrical design specifications and acceptance specifications;

9. There should be safety measures for the source of danger, and a red light warning can be set at night.

Hello, I am glad to answer for you, the belt worker is a kind of operator in the coal mine, quarry and other industries, mainly responsible for the operation and maintenance of belt conveying equipment. The key points of the post operation of the belt worker are as follows:1

Familiar with the equipment: The belt worker needs to be familiar with the structure, performance and working principle of the belt conveyor equipment in his position, and master the start, stop and operation methods of the equipment. 2.

Check the equipment: Before starting the machine, the belt worker needs to check whether the equipment is normal, whether the belt is worn, whether there are loose parts, etc., to ensure the safe operation of the equipment. 3.

Start the equipment: The beltman needs to start the equipment in accordance with the operating procedures, observe and monitor the working status of the equipment, find abnormal situations in time and take corresponding measures. <>

4.Monitoring operation: In the process of equipment operation, belt workers need to pay attention to the operation status of the equipment at all times, check the tension of the belt, the conveying of materials, the operation sound of the equipment, etc., find equipment failures and problems in time, and report maintenance in time.

5.Maintenance: Belt workers need to regularly maintain the equipment, clean the debris on the belt, clean the belt, etc., to ensure the normal operation of the equipment.

6.Safety production: Belt workers need to comply with safety regulations, pay attention to personal safety, wear labor protection products that meet the requirements, and avoid accidents during operation.