The development trend of the plastic mold industry, what are the employment prospects of plastic mol

According to the analysis of industry insiders, the future development trend of China's mold includes 10 aspects:

First, the mold is becoming larger and larger.

Second, the precision of the mold will be higher and higher. 10 years ago, the accuracy of precision molds was generally 5 microns, but now it has reached 2-3 microns, and molds with 1 micron accuracy will also be on the market.

Third, the multi-functional composite mold will be further developed. In addition to stamping and forming parts, the new multi-functional composite mold is also responsible for assembly tasks such as stacking, tapping, riveting and locking, and the performance requirements for steel are getting higher and higher.

Fourth, the proportion of hot runner mold in plastic mold will also gradually increase.

5. With the continuous improvement and development of the plastic molding process, gas-assisted molds and molds suitable for high-pressure injection molding and other processes will also develop.

Sixth, the application of standard parts will be more and more extensive. The standardization of molds and the application of mold standard parts will greatly affect the mold manufacturing cycle, and can also improve the quality of molds and reduce the cost of mold manufacturing.

Seventh, the prospect of rapid economic mold is very broad.

8. With the development of vehicles and motors and other products to lightweight, the proportion of die-casting molds will continue to increase. At the same time, the life and complexity of the die casting mold will also put forward higher and higher requirements.

9. The process of replacing steel with plastic and wood with plastic will be further accelerated, and the proportion of plastic molds will continue to increase. Due to the increasing complexity and precision of mechanical parts, the requirements for plastic molds are also getting higher and higher.

10. The technical content of the mold will continue to improve.

In my opinion, the development trend of the mold industry is worrying. molds and cabbage for a price.

There are also a number of plastic mold production factories near my daily life, the trading is very hot, and there is a lot of order information, I often see the workers in it are busy every day, and it should be quite profitable, I have come in myself, and the working environment inside is very comfortable, because the level of intelligence in this field is very high. Manpower only assists equipment to carry out production and manufacturing, there is no gravity work, and many positions are all on duty, and there is no need to stand all day. Because it is much more comfortable to sit down than to stand, and it is very easy to cause more physical illnesses when standing, it is difficult to occur in the working environment of a plastic mold processing factory, due to the natural environment.

Or very pleasant.

But there is a drawback that most of all the plastic mold production plants are involved in the rotation system, and some even need to be on duty at night, which should be selected according to their own physical standards, which is also a little bit of the working environment, because many people are not suitable for the night shift to worry about their own inability to work and rest normally, will get some diseases, so the work specification of the night shift is not enough in this working environment, but there is no way, after all, it is the production line, If you don't produce at night, you will make a lot less money, and so many people in such a large factory have to be supported, so there is no way to have a night shift.

Another point in the working environment is not enough, I think it is also a lack of a certain amount of arbitrariness in the operation link, because the production line is all inseparable from people, every position is a stable staff, if you have to do a little anxious thing, you also need to let others take care of the production line, which is very cumbersome, but fortunately, the salary of mold processing workers or is very high, from our home around these plastic mold production factories can be seen, most of their salaries are five or six thousand, And the salary of other factories near us is only three or four thousand, so the salary is not bad.

In addition, it is impossible for me to choose this job, because the work of the production line is not suitable for me, I have a restless personality, I like to run around, and I like to get along with different people every day.

Plastic mold manufacturing workers are an indispensable part of modern industrial production, mainly responsible for the design, manufacture and transformation of molds for various plastic products, such as plastic parts, plastic toys, plastic packaging, plastic pipe fittings, etc. This industry is of great significance to the development of China's and even the world's manufacturing industry. At present, the employment prospects of plastic mold makers are good, and here are some reasons:

The application of plastic products in modern industry is becoming more and more extensive, and the demand for plastic mold manufacturers is also increasing.

With the increasing demand of consumers for high-quality, high-performance and low-cost products, more and more enterprises have begun to use automation and intelligence, and plastic mold manufacturers can naturally integrate into it, becoming an important process in the intelligent production process. Defeated and trapped.

With the development of science and technology, the continuous emergence of new materials and new processes has also brought better opportunities and prospects for the development of plastic mold manufacturers.

Therefore, the employment prospects of plastic mold makers should be relatively good for a long period of time in the future. If you want to enter this profession, you need to have relevant technical and practical experience, and constantly learn to adapt to market changes, and at the same time, you need to improve in terms of digitalization and intelligence.

The employment prospects of plastic mold makers are very good, you can learn a lot in this job, and you can earn a lot of money.

The prospects are very good, and there are many companies that are very short of such talents, and the salary will be better.

With the rapid development of the plastic mold design industry and the promotion and application of plastic products in the aviation, aerospace, electronics, machinery, shipbuilding and automobile industries, the requirements for the mold are getting higher and higher, and the traditional plastic mold design method has been unable to meet the requirements of product upgrading and quality improvement.

Computer-aided engineering (CAE) technology has become the most effective way to develop plastic products, mold design and product processing for these weak links.

Moldflow, Inc., a U.S.-listed company specializing in injection molding CAE software and consulting, has dominated the plastic molding CAE software market since 1976, when it released the world's first flow analysis software.

In recent years, it has been widely used in the fields of automobiles, home appliances, electronic communications, chemicals and daily necessities.

The use of CAE technology can be used to analogous analysis of the entire injection molding process on the computer before mold processing, and accurately analyze the filling, pressure holding and cooling of the melt, as well as the stress distribution, molecular and fiber orientation distribution, shrinkage and warpage deformation of the product, etc., so that the designer can find the problem as soon as possible and modify the part and mold design in time, instead of waiting for the mold trial to repair the mold.

This is not only a breakthrough in the design method of traditional plastic molds, but also has great technical and economic significance for reducing or even avoiding mold repair and scrapping, improving product quality and reducing costs.

Plastic mold design requires not only CAD technology, but also CAE technology.

This is the inevitable trend of development.

Injection molding is divided into two stages, namely the development design stage (including product design, mold design and mold manufacturing) and the production stage (including material purchase, mold tryout and molding).

The traditional injection molding method is before formal production, because the designer designs the mold with experience and intuition, after the mold is assembled, it usually takes several mold trials, and after the problem is found, it is not only necessary to re-set the process parameters, but also need to modify the design of plastic mold design products and plastic molds, which is bound to increase production costs and extend the product development cycle.