Lenovo A60 positioning can not be used What s going on,It s okay to use wifi

Updated on technology 2024-05-20
11 answers
  1. Anonymous users2024-02-11

    We apologize for the inconvenience.

    This kind of software positioning is usually a location-based service, and the location of the base station of a nearby operator is located through the network search, which requires the support of the network. It is recommended that you try to confirm and operate the following:

    1. Is the mobile network connection normal? If it is caused by an abnormal network, it is recommended that you try to check whether the mobile data switch and access point of your mobile phone are abnormal.

    2. If the software itself is abnormal, you can try to go to the "System Settings--Applications--Management Applications" of the mobile phone first, find the relevant program, click to enter the data of the clearing program, and then try.

    In addition, for the situation that you can't locate when you use multiple apps, it is recommended that you check the system settings - location - check Use GPS satellite, GPS assist, A-GPS, and re-mobile phone to see if the problem exists.

    If it can't be effectively solved, we recommend that you first back up the fuselage data for factory reset operation (system settings - privacy), if it is invalid after restoration, please take the time to go to the local Lenovo after-sales service center, let the engineer help detect and solve.

    Lenovo authorized repair site inquiry.

    The business hours of the maintenance site are usually from 9:00 to 18:00 from Monday to Sunday, except for holidays, and the stations will be slightly adjusted according to their own operations.

  2. Anonymous users2024-02-10

    Unless it is an open wireless network, that is, a network without a password, even if the mobile phone finds a network signal, it will not be able to access the Internet.

  3. Anonymous users2024-02-09

    If the conditions are limited and you cannot compare with other wireless networks, it is recommended that you conduct a simple investigation based on the above suggestions, and if it cannot be improved, please send it to the repair site in time.

    Inquire about authorized maintenance sites on the official website.

    You are welcome to contact us at any time or visit Lenovo Lewen (for consultation.

  4. Anonymous users2024-02-08

    If you find it, your phone is normal, and it may be that the router has set a security policy, requires a wireless connection password, or has a blacklist and whitelist setting, and your phone's wifi address is not in the whitelist.

  5. Anonymous users2024-02-07

    Some networks are unusable, set up permissions, you need a password if you want to use it, or you need an account to use it, such as China Mobile's CMCC needs to open a service to use,

  6. Anonymous users2024-02-06

    First, you make sure that your home network is connected. whether the computer is connected to the Internet; If you can't restart the router.

    2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

    3. If the above cannot be solved: we set static IP4 for the mobile phone, and the wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

    Resources.

  7. Anonymous users2024-02-05

    1 Use a SIM card to access the Internet on a mobile network:

    1.Make sure that there is no arrears on the mobile phone and that the mobile data service has been activated on the mobile phone;

    2.Verify whether the mobile phone has turned on the "Mobile Network Data Service", and set the path as follows: in the normal standby interface, swipe down from the top of the screen, data connection (light up icon); Or in Settings - Line & Network - Mobile Network (tick).

    3.If you can't access the Internet normally, try resetting the access point to the default settings. Open Settings - Wireless Network Settings - Mobile Network --- Access Point Name, click the menu button at the bottom left, and select Reset to Default Settings;

    4.Try to switch access points, open Mobile Network - Access Point Name, and select a different access point to switch;

    5.If you still can't access the Internet, try "Create a new access point". The parameters need to be provided by the network operator, and after the setting is completed, you need to click the menu button at the bottom left - select Save; Set the path: Settings - Wireless Network Settings - Mobile Network - Access Point Name, click the menu button at the bottom left - Create APN

    6.If it still doesn't work, it is recommended to try a different SIM card to rule out the problem of the SIM card itself that causes it to be unable to connect to the Internet.

    7.It is recommended that you try it in a different network environment, and it cannot be ruled out that the network is busy and you cannot access the Internet. (Whether other mobile phones in the same environment can be used normally).

    If the technical solution we provide is effective, please choose to adopt it as a valid answer for other users' reference, thank you.

  8. Anonymous users2024-02-04

    The reasons why the wifi connection keeps disconnecting boil down are as follows:

    One is that the password may be incorrect.

    The second is that the router DHCP may not be turned on.

    The third is that the MAC address may be bound to the signal.

    Solution: 1. Enter the correct password.

    2. Enter the router interface to open the DHCP service option, and change the time in the lease period of the local and commercial good addresses to the shortest (1 minute) attempt.

    3. Enter the router interface, select "Wireless Management" - Access Control", have a MAC address, enter the MAC address of the mobile phone, and click to add. Mobile phone query MAC address: Settings - About mobile phone - Status - Leather - WLAN MAC address.

  9. Anonymous users2024-02-03

    We apologize for the inconvenience.

    After verification, your mobile phone has a built-in GPS chip, which can realize the positioning function, QQ positioning is a location-based service, and the location of the base station of the nearby operator is searched through the network, and the support of the network is required, please understand.

    If QQ cannot be located, it is recommended that you try to confirm and perform the following operations:

    1. Is the mobile network connection normal? If it is caused by an abnormal network, it is recommended that you try to check whether the mobile data switch and access point of your mobile phone are abnormal.

    2. If the software of WeChat itself is abnormal, you can try to go to the "System Settings--Applications--All" of the mobile phone first, find "QQ", click to enter the data of the clearing program, and then try.

    If it can't be effectively solved, we recommend that you back up the fuselage data for factory reset operation, if it is invalid after restoration, please take the time to go to the local Lenovo after-sales service center, let the engineer help detect and solve.

    Official after-sales site inquiry.

  10. Anonymous users2024-02-02

    First of all, WeChat's search for nearby people is located through the signal transmitted by the network, and has nothing to do with the GPS positioning system on the mobile phone, the problem may be due to the interruption of your mobile phone network or your location is relatively remote, the mobile phone signal positioning can not be found, and the other is because your software system must be updated to accept the positioning.

  11. Anonymous users2024-02-01

    Hello, sorry for the inconvenience.

    Lenovo A860E model GPS function operation: Enter the system settings - location service, turn on the GPS positioning function, if the above operations cannot be completed, please refer to the following suggestions:

    2. The weather will affect the GPS positioning, check whether the weather environment at this time is rainy or the clouds are thick;

    3. When the GPS navigation function is started for the first time, it takes a certain amount of time to go to the ephemeris and search for satellites, so as to realize the positioning function. This is a normal phenomenon of GPS navigation function, please be patient;

    4. Turn on the A-GPS function in the system settings - location service, and assist the GPS receiver to complete the ranging and positioning service through the base station positioning server as an auxiliary server;

    5. A860E model preset navigation software, please check whether the map data is lost or the software is abnormal, you can re-install the observation or try other software;

    If there is no significant improvement after the above operations, please back up the fuselage data and restore it to factory settings. If the problem cannot be effectively solved after recovery, affecting your normal use, it is recommended that you take the time to go to the repair station for specific inspection and treatment.

    The address of the repair station.

    You are welcome to contact us or visit Lenovo at any time

    Consult to find out.

Related questions
16 answers2024-05-20

Hello dear users:

1.It is recommended that you restart your phone and observe the attempt; >>>More

5 answers2024-05-20

Hello dear users:

I'm sorry to affect your use, if you want to restore factory settings, use Fun Sync ( >>>More

26 answers2024-05-20

Open traffic is not available, probably because the area is closed. >>>More

10 answers2024-05-20

Hello, first of all, thank you for using Lenovo's products, according to the situation you described, it is recommended that you back up your data first, and perform the following "double wipe"To operate, the method is to press and hold the "Power Key + Volume Plus key" at the same time in the shutdown state"Enter the recovery mode and execute "wipe data." respectivelyand "wipe cache...."After that, restart your phone and try to get into the system. >>>More

16 answers2024-05-20

Hello. We apologize for the inconvenience.

1. It is recommended that you confirm whether the mobile phone is in arrears, and if so, please make up the charges to the operator and try again; >>>More