Is there an outdoor cement block floor texture model

What about outdoor flooring? This question cannot be generalized and should be analyzed according to your specific situation. Here is a brief introduction to the characteristics of outdoor flooring for your reference.

Product features of outdoor flooring: 1. Deep carbonization of outdoor wood flooring: It is to pyrolyze the wood at high temperature to reduce the concentration of hydroxyl groups in the wood components, thereby reducing the hygroscopicity and internal stress of the wood, achieving the purpose of reducing the deformation of the wood, improving the corrosion resistance of the wood, inhibiting the growth of decaying bacteria, and achieving the purpose of weather resistance and anti-corrosion.

2. Anti-corrosion treatment of outdoor flooring: In order to maintain the original strength and beauty of the wood for a long time, it is treated with anti-corrosion and anti-ants. Under the premise of strict quality control, preservatives such as CCA, CA (cupazole), and ACQ are injected under pressure to deeply penetrate the agent, and the agent that penetrates into it can be tightly attached to the wood

Absolutely, the current floor, whether it is a solid wood floor or a laminate floor, can be directly laid on the cement floor.

Method; First level the ground with cement, if possible, make a layer of polyurethane floor paint (the building materials store has to buy), and lay one or two layers of moisture-proof mats (when you buy the floor, the store will give it to you, no money), the advantage is that it is moisture-proof and plays a buffering role, and people feel comfortable when walking, and there is no noise.

It has actually proved that this paving method is better than the way of making wooden keels, the cost is low, the floor is not deformed, and there is no sound when walking, so it is widely used at present.

If you rent a house, you don't have to buy too expensive flooring, forty or fifty yuan per square meter is enough. The labor wage for laying the floor is included in the floor**, so you don't have to spend any more money.

the method of choosing the floor;

First take a piece of floor and break it with a sledgehammer, look at the section of course you will know whether it is made of paper or plant fiber or wood pulp, of course pure wood pulp is the best, the outside of the floor is painted, you can't see it, Fei has to interrupt the section, the section sawed with a hacksaw is not visible (the sample given by the store is hacksawed, it is difficult for inexperienced people to see.

To test the water, take a sample and soak it in water for a week, so that it will not be deformed, blistered, or thickened.

Scratch the surface of the floor with a sharp weapon, use a nail or a key to scratch the surface, and if it is not scratched, it is fine.

floor surface; Flat, the corners should be straight.

In home renovation, if the cement floor is uneven, it can be remedied by the following methods:

1) After the ground is cleaned and sized, the bottom layer is leveled with gypsum;

2) If it is only for a small amount of unevenness, it is too expensive to buy construction glue, you can use fast adhesive powder to level it;

3) Large-scale leveling with cement glue, unglued cement should not be used, and the thickness is not enough to break and peel;

4) Lay the floor and add the keel to cushion it up, and use the keel to find the flat.

1. Cement practice: 1After the hydropower pipeline is laid, 5 small stones are mixed with cement and coarse sand for preliminary leveling.

2.After waiting for a week, carefully observe whether there are cracks in the ground, and if there are cracks, you need to immediately use the leak king to repair the joints.

3.If there are no cracks or the cracks have been repaired completely, then use fine sand to mix cement for a second leveling, and then use masonry steel plate to level out the cement oil.

4.Wait for the cement floor to dry and then apply bright oil. (Note: After the implementation of steps 2 and 3, pay attention to cleaning and drying, the shortcomings are not wear-resistant and easy to absorb color).

2. Resin floor practice: 1After the hydropower pipeline is laid, 5 small stones are mixed with cement and coarse sand for preliminary leveling.

2.After waiting for a week, carefully observe whether there are cracks on the ground, and if there are cracks, you need to immediately use the leak king to fill the joints, or use the resin matching priming and leveling materials to level.

3.If there are no cracks or the cracks have been repaired completely, the resin material is self-leveling. (Note: Steps 2 and 3 must be performed by a professional company technician).

Plain soil tamping - 60 thick C15 concrete cushion - 1: cement mortar plastering calendering 25mm thick.

Plastic flooring can be applied directly to the concrete floor. It can be used in the following locations according to the classification of its place of use:

1. Education system, including schools, training centers, kindergartens, etc.;

2. Medical system, including hospitals, laboratories, pharmaceutical factories, nursing homes, etc.;

3. Commercial system, including shopping malls, supermarkets, hotels, entertainment and leisure centers, catering, specialty stores, etc.;

4. Sports system, including stadiums, activity centers, etc.;

5. Office system, including office buildings, conference rooms, etc.;

6. Industrial systems, including factory buildings, warehouses, etc.;

7. Transportation system, including airports, railway stations, bus stations, docks, etc.;

8. Home system, including family indoor living room, bedroom, kitchen, balcony, study, etc.

There is no wallpaper directly on the ground, you can refer to the floor leather, waterproof.

Looking forward to your adoption, thank you.

No wooden floors need to be installed one by one after brackets, and it is recommended to directly use cardboard boxes of household appliances to lay the floor on them, which are convenient for walking and resting.

Using floor leather is probably the only way, and economical.

Plastic flooring, the cost is 50-100 yuan, depending on yourself, the thickness is in centimeters.

How much does it cost to use a hundred square meters?

1Open the Texturer and select the Building Material.

2. Template selection ideal diffuse reflection.

3Open the full reflection map, select the bitmap, and load a cement **.

<>4 Adjust the number of UV tiles.

5Create a model and assign a material to render it in perspective.

In the material, you can adjust it.

If the black-white-gray map is used in the reflection channel of the vray material, then the black is not reflected, the white is fully reflective, and the gray is moderately reflected.

If the black, white, and gray map is used in the refraction channel of the vray material, then black is opaque, white is completely transparent, and gray is translucent.

Black and white map - used in reflection, gray map used in bump, open in ps**, select layer - adjust the image curve, you can modify the texture you want, I hope it can help you!!

When a black and white map is used as a transparent channel, black represents full transparency, white represents total opacity, and gray represents translucent.

When used as a bump channel, white represents protrusion and black represents recess.

The bump of the wood floor is usually added with a wood grain map in the intrinsic color channel, and then a gray bump map is added to the bump (bump) channel, and the intensity of the bump can be set by yourself.

Leveling the ground is fine. It is best to ask a professional worker to shop.

Precautions for laying floor paper.

1.First brush the cement floor, repair the uneven convex and concave places, after drying, the old newspaper evenly brushed with chemical paste is pasted on the cement floor, and use a soft cloth to flatten and compact, so that it is pasted flat and firm, each layer is pasted, and then paste a layer after it is all dry, so that 5-6 layers are pasted, and then a layer of kraft paper (or white paper) is glued, and a layer of wood grain paper (or paper with other patterns) is pasted as the surface layer after drying, after the surface layer is dry, brush 1-2 times of varnish, and finally apply floor wax to use.

2.Laying floor paper, you should pay attention to thoroughly brush the cement floor (including the baseboard), the adhesive should be thin and not dry, the brush should be evenly on the paper, and should be placed for 1-2 minutes after brushing, and then paste after eating the water. Each layer of paste, the edge should have a certain margin pasted on the baseboard, each layer is more than the previous layer, so that the paper layer can be attached to the baseboard smoothly, and there will be no warping angle.

Materials to be prepared for floor paper: old newspaper, kraft paper (or white paper), wood grain paper (or paper with other patterns), varnish (phenolic varnish, alkyd varnish or other wood varnishes are acceptable), chemical paste (1000ml of boiling water is washed into 20-30 grams of methylcellulose, and the mixture can be evenly formed into a paste).

It can be laid directly on the concrete floor and floor leather.

1. First measure the size of the accurate room, and cut the floor leather according to the standard that is slightly larger than the measured width, which is conducive to lapping and trimming when paving.

2. In order to make the curly floor leather extensive, it is best to place it in a space not less than 15 degrees Celsius for about 24 hours.

3. Clean the ground, pay attention to repair and smooth uneven places, and keep the ground clean, tidy and dry.

4. Gluing; Glue the floor according to the size of the floor leather, apply a piece of paving, and proceed in this order. The width of the floor where each piece of leather meets should be left 10 cm unglued first, so that the joints can be treated last.

5. Use a long-handled ground brush to drive out and compact, the width of the overlapping floor joints should be about five centimeters, use a long ruler to align with the center of the overlap, cut it with a cutter along the ruler, and then remove the cut edge strips, and brush the glue on the seams again.

6. Finally, check whether the floor leather is smooth and whether there are air bubbles, and use a syringe to insert the air to suck out, and then compact.

How to choose floor paper?

1. Look at the appearance. When purchasing floor paper, we should first observe the material quality of the floor paper, observe whether there are cracks, delamination, creases, bubbles, and stains; Second, observe the color and texture of the floor paper. Observe whether the color is uniform, whether there is color difference, whether the texture is evenly layered, and whether there is any missing print.

Note: If it is very slight and cannot be seen, it is also considered a qualified product.

2. Look at the certificate marking. When we choose floor paper, we should pay attention to its product name, manufacturer name, product mark, grade, length and so on. In addition, the products of regular manufacturers have product qualification certificates, and consumers also need to show them!

3. Smell the smell, when choosing the floor paper, you should also smell whether there is a pungent smell, if the smell is pungent, the product is likely to contain formaldehyde, benzene and other harmful substances!

Tiles and wooden planks are fine, not concrete floors.

With the improvement of people's living standards, more and more families choose to lay solid wood floors on the ground in the process of home decoration, but the daily cleaning and maintenance of solid wood floors is a headache, so how to quickly and effectively clean and maintain their own solid wood floors?

1. Self-formulated floor detergent is affordable and effective.

In fact, you can also configure some simple detergents to maintain and clean the wooden floor, such as adding 450 grams of soda, soft soap and bleach and 2270 ml of water to a large pot to mix well and boil to half of the original volume, wait for it to cool and then clean the wooden floor with a hard brush.

Second, save time and effort to select refined salt.

Refined salt is very effective for clear egg traces on the board, you can sprinkle some refined salt, wait for about 10 minutes to clean, which not only saves cleaning costs, but also is too time-consuming and laborious!

Third, concentrated alkaline water to remove grease.

For grease stains on the floor, you can boil the aqueous solution of concentrated stone alkali first, cool it and then clean it. Immediately after that, you can sprinkle some hot water and bleach on the stained area and leave it in this condition for an overnight time before washing.

Fourth, the salad oil decontamination and brightening.

Salad oil is one of the items often used in daily life to clean floor stains, in the process of cleaning the floor, only need to add a few drops of salad oil in water, which can not only brighten the wooden floor, but also achieve the purpose of cleaning and staining.

5. Milk with vinegar for maintenance and decontamination.

For some common stains on the floor, you can add some vinegar to the fermented milk, which can not only remove the stains on the floor, but also keep the floor shiny!

Tips for maintaining wooden floors.

Before dealing with the stains on the wooden floor, use a clean broom to clean the dust in the room, then use rice water or a rag dipped in detergent to clean the local area of the stain, and finally use a semi-dry mop to clean a large area.

In order to prevent the growth of bacteria during the use of wooden floors, you can use a vacuum cleaner regularly to clean, remember that it is best to use a vacuum cleaner with a filter function, so that you can clean and thoroughly clean the dust and bacteria on the wooden floor.

There is also a very simple wooden floor maintenance and cleaning tips, wear soft wool cloth slippers during indoor activities, so that you can simply clean the floor during daily walking.

In addition to cleaning the wooden floor, it is also necessary to maintain the wooden floor. For example, solid wood flooring is prone to cracks in the cold winter, which is caused by the loss of water and shrinkage of the floor in winter, and regular solid waxing of solid wood flooring will effectively reduce the frequency of such situations.

It depends on the situation:

1. If the ground base is good, you can not make a wooden keel, but you need to do a good job of moisture-proof treatment. Wipe the floor with a mop cloth and dry it, and then spread the moisture-proof film and then lay the floor.

2. When the original ground at home is uneven or unscreed, it is not possible to lay the wooden floor directly, and the practice of laying the wooden keel should be chosen.

The wooden keel generally chooses a cross-sectional size of 30mm 30mm, and a cross-sectional size of 40mm and 60mm is used in places where the amount of personnel activity is large. Before installation, the underside of the wooden keel was brushed with anticorrosive paint 2 or 3 times.