What is the difference between the effect of cement and tile adhesive tiling?

The difference between cement tiles and tile glue tiles is still obvious, the cement mortar used for floor tiles in my house, there is a brick in a corner of the living room that has been hollowed, banging and banging. When pasting wall tiles, the decoration master suggested that we buy some Gulai's tile adhesive, he said that the cement wall tiles will definitely fall, the effect of using tile adhesive is better, the adhesion is stronger, and the paste is firmer, and said that Gulai's tile adhesive will lose the bricks.

Cement mortar is a hydraulic cementitious material, and its cohesion depends on the slurry penetrating into the void of the adhesive substrate, gradually forming a needle-like crystal and generating friction, and achieving mechanical nailing cohesion. Vitrified tiles are dense and have a water absorption rate as low as 1, so it is difficult for traditional cement mortar to achieve effective bonding for low-water absorption tiles.

Tile adhesive belongs to cement-based improved mortar, but also hydraulic cementitious material, its adhesion is dependent on the slurry penetrates into the adhesive base void, and gradually forms a needle-like crystal and produces friction, while the porcelain tile is dense and porous, and it is difficult to achieve mechanical nailing. The vitrified tile material is dense and the water absorption rate is as low as 1, so it is difficult to achieve effective bonding with ordinary tile adhesives.

The back coating glue is the third generation of new ceramic tile paving materials, there are two kinds of emulsion adhesive and paste adhesive, which solves the problem of low water absorption tile paving, such as the occurrence of brick dropping. Here it is especially recommended to put down the paste tile adhesive, such as alkali gram tile adhesive is the use of ultra-nano materials imported from the United States, the molecular radius is extremely small (5000 mesh), the adhesion and penetration are extremely strong. Adhesive backing with tile surface:

The adhesive molecules penetrate into the pores of the tile, forming countless irregular bonding points in the tile, forming a web-like structure; Adhesive and mortar surface: The adhesive molecules and cement molecules penetrate each other through Brownian motion, polymerize and solidify to form a staggered branch-like structure. Because the expansion coefficient is similar to that of concrete, it belongs to the bonding of materials with the same mechanism, and it truly achieves 100% no bricks.

1. What is cement mortar? What is Tile Adhesive?

1. Cement mortar.

Cement mortar is a traditional construction scheme, but cement mortar construction, it is difficult to ensure that the cement mortar can be evenly covered, in addition to pay attention to the selection of cement number, cement mortar ratio and other precautions, there may be hollowing, falling off in the later stage; In addition, cement mortar construction is longer than the use of tile adhesive, and there are strict requirements for the level of construction workers.

2. Tile adhesive.

The new type of tile paste material has the advantages of simple construction and firmer paste, however, tile adhesive also has certain disadvantages, compared with cement mortar, the construction needs to ensure the flatness of the wall, and the base layer should also be cleaned, otherwise it will affect the bonding effect of tile adhesive.

Second, is it better to use cement or tile glue for tiles?

1. Comparison from the construction aspect.

If the cement mortar is used to paste the bricks, the construction steps have wet walls, brick throwing, support, etc., the effect is low, and the effect will not be too good, and it is easy to produce the situation of tile hollowing and falling off; If you use tile glue to paste tiles, tiles do not need to be soaked in water in advance, nor do you need to wet the wall, the technical requirements of decoration workers are not high, the paste speed is 4-6 times that of cement, the brick joints will not have excess slurry, the brick surface is not dirty, and you can also pave multiple tiles at the same time, which is much better than the paving method of cement mortar to be single-piece sizing.

2. Comparison in terms of aesthetics.

When using tile glue to paste tiles, the glue ratio of the wall is uniform, and the shrinkage during the bonding process is also consistent, so the flatness of the tile surface is high.

3. Start from the decoration materials.

At present, the quality of the ceramic tiles used in tiling is high, and the water absorption rate of ceramic tiles is also decreasing, so that if the traditional cement mortar is not improved in quality, the demand for tile adhesive will be higher, of course, the decoration market is also full of cement and tile adhesive of different quality, and the owners should pay attention to the method when they go to buy.

Answer: Tile is good with tile glue. The cement needs to be blended, and the walls need to be wet and supported, which will be more complicated. The tile adhesive only needs to be stirred with water, and the adsorption is good and the paving is fast.

And the water absorption of cement mortar can not meet the current paving, which is likely to cause the tile to fall off due to thermal expansion and cold contraction.

Compare the heart] [compare the heart] [compare the heart].

Which is better, tile adhesive or cement? In fact, tile adhesive can be said to be an upgraded version of cement, such as Gulai tile adhesive is a high-quality environmentally friendly polymer modified cement-based composite adhesive material, which is made of high-standard cement, graded sand, redispersible latex powder and other additives. So if you want to say that it is good, the effect of tile adhesive must be better than cement!

1. Gulai tile adhesive (Gulai tile adhesive is a well-known large-scale enterprise of new environmental protection decoration materials in China) 2. Yuegang tile adhesive (a well-known waterproof building materials emerging enterprise in Shanghai) 3. Tibeibel tile adhesive (a professional new environmental protection waterproof manufacturer in Guangzhou) 4. Jiacai tile adhesive (a well-known building materials manufacturer in Hunan).

5. JCDecaux (a wholly-owned enterprise designed by the French PAREX Group in China) 6. Xiluoka tile adhesive (Hunan emerging waterproof building materials manufacturer).

7. Yuhong (Beijing Yuhong Waterproof mainly promotes waterproof coating products) 8. Gushuibao tile adhesive (Hunan new building materials manufacturer).

9. Sika (Sika (China) **** entered the Chinese mainland market in 1993) 10. Mapei (Mapei Group was founded in Milan in 1937).

Cement is good because it is not only strong but also cheap in the market