How to do it at the same time when the desktop is wired and the laptop is wireless?

It is recommended to check whether the network settings of the wireless router conflict with the network settings of the desktop.

Connect the network cable from the cat to the WAN interface of the wireless router, and after having a wireless router, there is no need to set dial-up Internet access parameters on the desktop, and the network parameters of the desktop are set to automatically obtain IP Internet access.

Then, set the relevant parameters of dial-up Internet access on the wireless router, and at the same time, the wireless router needs to enable the DHCP function.

At this point, desktops and laptops can access the Internet at the same time.

Your entry or go settings, it is better to set it to a fixed IP.

Connect the network cable to the desktop, and then enter the router to set up a wireless router, and the laptop can be wireless.

Wireless, of course, the laptop is connected to the desktop with a wireless cat, plugged into the wireless router, wow (total interface), the router is placed on the desktop, and the cable should be bought longer.

You definitely haven't set up there yet!

Step or something, you can definitely use it at the same time after careful research!

For example, the settings of the router, you take a closer look at the content of the settings, don't worry, don't look at anything, click Next, click OK!

You can do it at the same time, and the steps are described in detail below:

1. First of all, the wireless is connected to the external network, and the wired needs to be set to a fixed IP;

2. Then enter routeprint and click enter to appear the interface list of the computer;

3. What we need to confirm here is the wired and wireless interface, the wired interface is 11, and the wireless interface is 12;

4. Here in the command prompt type:;

5. I have added a route here, so it shows that the route already exists, and after I set it up, there is no error prompt when I run it;

Extended information: Connect to the wired network first, and then you can connect to the intranet resources. Then turn on the wireless network connection, after linking to the AP, find that you can't access the Internet, at this time enter the "Network and Sharing Center", enter the "Adapter Settings", click "Organization" there, select "Layout" to bring up the menu bar, and select "Advanced" and "Advanced Settings".

Here, turn the order of Wi-Fi connections to the top. Next, you can go to the extranet, and the intranet access is also normal. One of the drawbacks of this method is that it is restarted when the wireless device is turned off.

When you turn on the wireless device again, the original settings have been restored and you need to set it up again.

Desktop, is an independent and separated computer, completely unrelated to other parts, compared with notebooks and netbooks are larger, hosts, monitors and other equipment are generally relatively independent, generally need to be placed on a computer desk or a special workbench. Hence the name Desktop.

It can be connected and used at the same time, and the steps are described below

1. First of all, here I set the wired for the internal network connection, and the wireless for the external network connection, here the wired needs to be set to a fixed IP;

2. Then enter routeprint and click enter to appear the interface list of the computer;

3. What we need to confirm here is the wired and wireless interface, the wired interface is 11, and the wireless interface is 12;

4. Enter route add -p mask if 11; in the command prompt

5. I have added a route here, so it shows that the route already exists, and after I set it up, there is no error prompt when I run it;

There are only a few ways to access the Internet, all of which require additional equipment, and the desktop computer cannot transmit wireless signals or have multiple interfaces.

There are three ways to do this.

First, wireless or ordinary routers, the difference between the two is about a few dozens, but considering the use of the notebook and the cost of the notebook network cable, the wired one probably saves less than fifty yuan, but it is inconvenient.

Second, buy a hub, about thirty to fifty, and the routing function is about the same, cheap, two computers form a local area network, one of which dials, and the local connection is set up with a fixed IP, such as the desktop setting, the mask, the notebook setting, the mask is the same, the gateway setting, so that after getting it, the desktop computer is turned on and dialed, and the notebook can also access the Internet, the disadvantage is that there must be a host to be on it together, of course, if the desktop is not opened, the notebook can be dialed separately, the advantage is to save money, the mainstream usage before, Now I basically use routing.

The third method, similar to the second, add a network card on the machine, ** probably the same as the hub, the two machines do the same network cable, that is, the crystal head at both ends of the network cable is equal, not staggered, this store can be done, just make it clear, the desktop computer can only be on the Internet notebook, the IP settings are the same, the disadvantage is that it is more troublesome than the first two, and the advantage is that you don't need to add more boxes.

There is no better way.

Recommended wireless routing, it is one hundred and twenty or thirty, there will be no more cost-effective network sharing than this, a line to achieve network sharing without increasing the equipment is impossible, it is difficult for a clever woman to cook without rice.

3G wireless network card or wireless router, nothing else seems to be possible.

Actually, the question is very simple. ADSL for desktop computers, Sky Wing for laptops. That's it.

To use a simple analogy, you now turn on your desktop computer on adsl and I turn on my laptop on Skywing. Wouldn't we be able to surf the Internet at the same time? It's amazing!

Baa...