Help me!! Mobile phone virus Nokia 7500

Non-Smartphones Will Not Be Poisoned Viral computer viruses on mobile phone memory cards will only affect the Windows system of the computer, and will not have any effect on the mobile phone system. **It doesn't work because the file is damaged by a virus, and it doesn't matter much. It's too normal for Nokia to have garbled characters in the mobile phone update library, just remove the label of the file.

Method:Right-click on the **file--Properties--Summary--Advanced,Delete the artists you see、Record titles or something,If you think it's troublesome that there is software to remove tag information on the Internet,I haven't used it.,But it should be relatively simple.。 ）

Finally, I would like to remind you that you should kill the computer. It's best to use genuine antivirus software.

If it's not a smart phone, it won't be poisoned.

It's not that smartphones won't be poisoned.,It's okay.,My 7500 is also like this.,You will come to Hangzhou and have a continuous white screen n times.,Don't fall on the line 7500 is not resistant to falling If it really doesn't work, you can format the phone Ah Press and hold *3 to build when you turn on or delete the file。

It may be useful to remove the battery every three or four hours before installing the battery on power, and I had a similar situation.

NetQin mobile antivirus software.

1.Remove the memory card and see if it works. It can be used normally, just format the memory card or disinfect the card. If that doesn't work, continue.

2.Grid machine. There are three types of lattice machines: soft grid, hard grid, and software grid.

The soft grid method is to enter *, which will require the input of the lock code, and the initial password is 12345 (in the case that you have not changed it), which is highly secure but the grid machine is not complete. The hard way is to turn off the phone first and then turn it on when you make sure that the battery is sufficient, but you should press and hold the "*" key, "3" key and "dial key" tightly while turning on the phone, wait for the phone to start up successfully, and you can release it when you are asked to re-select the country and region to enter the time. There is no need to enter the lock code, but pay attention to the power failure or release of these keys in the middle of the grid.

This method is more thorough, can delete junk files more thoroughly, some people say that this method is harmful to the phone, in my experience of the grid machine is actually not harmful, recommended to use (different opinions do not shoot, see the wisdom). The third is the software grid machine, which is to use the system tools software for formatting operations, and there is no need to enter the lock code.

3.Regardless of whether the grid is successful or not, it is recommended to format the memory card.

4.If the white screen is still turned on and cannot be used normally, it is recommended to go to Nokia customer service for repair, if it is within the warranty period, you can directly take it to repair, and you can repair it as you like. If the warranty period has expired or it is a parallel import, as long as the payment is in RMB.

After you connect your phone to the computer, use the computer's antivirus software to check and kill all the disks of your phone, if not, you format the phone's memory and memory card, boot it up, if not, you can only take it to repair. It is also possible that you have installed some software that conflicts with your mobile phone, or there is a problem with the wiring of your mobile phone, and if you fix it, it will be about one or two hundred.

Grid machine is enough.

Press * on the standby interface, then enter the password 12345, OK, and wait for restart.

There is no virus in the mobile phone, only malware, and now the mobile phone antivirus software is chicken ribs, useless, it is recommended that you check the machine, and you can ask questions on the Saipan forum, there are many high-ranking people on it.

Are you sure it is poisoned, it is recommended to go to the place where it is repaired.

Brush the machine first, if it's poisoned, it's good, if it doesn't work, the display module is broken, it is recommended to change the screen, and then its display is a socket, if it is loose, it will also cause a white screen, a lot of repairs, will not tell you, it will only let you change the screen, it is recommended to flash the machine first, check the screen socket, and then change the screen.

Try it hard to see ?..

Check it out online. Hard-handed approach. Both. I won't go into details.

If it's licensed. It's OK to take it directly and throw it to customer service...

The group is all Nokia's, which can help you deal with non-hardware problems.

If the white screen does not turn on, it is recommended to remove the memory card and try to turn it on again. Generally, it is a problem with the memory card, if you take out the card and turn it on, then format the memory card on the computer and then put it in.

It may be caused by rogue software, first back up the important information of the phone, and then use the formatting function of the phone to restore the factory settings.

This problem can be solved, and when installing unfamiliar or questionable software in the future, you can find relevant information on it, so as to determine whether this software is rogue software.

1. Soft grid: enter * on the mobile phone, and then ask you to enter the lock code, the initial password of the general Nokia mobile phone is: 12345, if you have changed the mobile phone password, then you should enter your changed password (note, here is not the SIM card password but the mobile phone password). After entering the password, a white screen will appear, only the word nokia will be displayed, and the grid machine can be completed after 3 or 5 minutes, and the time of the virtual phone needs to be re-entered after the grid is completed.

2. Hard grid: turn off the computer first, press and hold the "dial key, "* key and "3" key while rebooting until the lead appears on the screen with the word "nokia", this process can not release any key, wait a few seconds until "formatting...... appearswords, then you can release the key. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and then re-enter the phone time.

3. The reputation of the elimination is better than the software to the grid machine:

You can install the "System Tools" software, which has the option to "Format", so you don't need to enter the lock code to check the machine.

There are a few points to note about the above grid machine:

1. Be sure to keep the phone absolutely sufficient, so it is best to fully charge it before the grid;