How to format a Nokia phone, how to format a Nokia phone

a.* —Phone hardware and software reset: In standby mode, input.

Will your phone prompt you to restore all factory settings? The phone will restart, select Yes, and then enter the lock code, which is the default.

After entering, select Confirm.

b.* 7780—soft reset of mobile phone (save ** number, information, incoming and outgoing call numbers, etc.) after the grid).

c.For special situations, if the phone cannot be turned on: turn off the phone first, and then press and hold the "green dial key" +".

Power on button" until a progress bar appears at the top of the machine screen and you can let go! It belongs to the hard reset of the mobile phone (after the grid phone, the mobile phone will restore all the settings when the phone was first purchased,).

Attention to the lattice machine: 1Turn off the machine and press the power button, and start the grid without any prompt.

2.When formatting, it is necessary to have sufficient power to ensure that it is sufficient to maintain the operation required.

Grid Tips:

3.The part of the software that was originally installed on the MMC card will be affected, depending on whether the program you installed has important files in C. In addition, all the shortcuts of the program installed on the e-drive will all run to the root directory.

Since the anti-installation file no longer exists, you must go to the installation directory to delete the program directly.

I don't know if the lattice machine is useful in this case, but let me tell you, the soft grid is 7370. I hope it helps.

If you also need a password for formatting, you can't remove the password for formatting.

Grid machine is generally in the mobile phone junk files too much, serious errors can not be recovered or the phone is abnormal, the grid machine will clear all the contents of the C: disk, and then write new system information, so please back up the data and information you need before the machine. There are three types of lattice machines:

1. Soft grid: enter * on the mobile phone, after which you are asked to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the mobile phone time will be re-entered after the grid;

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the phone, turn on the power until the word "nokia" appears, this process can not release any button, wait a few seconds until "formatting...... appears", then you can release the button. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and re-enter the phone time;

3. Through the software grid: install the system tools software, there is a formatting option in it, you can enter the lock code to grid the machine.

There are several points to pay attention to in the above grid: keep the power absolutely sufficient, do not try to shut down the grid on the way, do not plug in the charger, etc., if it is violated, it may cause serious consequences such as burn-in. There is also a hard grid may be a little damage to the hardware of the machine, not to be foolish, do not use the hard grid when the machine can not be turned on, and one thing to note is that the line 2 will disappear after the grid, and it must be restored to the kf flash.

1. Soft grid: enter * on the mobile phone, after which you are asked to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 3 5 minutes later, it will be completed, and the mobile phone time will be re-entered after the grid;

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, "3" key while turning on the phone, turn on the power until the word "nokia" appears, this process can not release any button, wait a few seconds until "formatting...... appears", then you can release the button. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and re-enter the phone time;

I really don't know anything else, let's use 73, and we know that *3 dial-up power can hardformat the phone.

The boot status is* Then enter the phone password, the default is 12345, the grid is up!

First of all, it depends on what kind of machine you are, if your machine is not a smart machine, just factory set it directly.

If you are a smartphone, enter * in standby mode, and the initial password is 12345

* The information is all after the format, so remember to prepare it.

Soft Grid Machine:

1.The easiest, use the "Factory Reset" feature in your phone's settings and follow the prompts.

2.Enter * - soft reset of the mobile phone (save ** number, information, incoming and outgoing caller numbers, etc. after the grid).

3.Enter *, original password 12345. Will your phone prompt you to restore all factory settings? The phone will restart, select Yes, and then enter the lock code, the default is 12345, and select Confirm after entering.

It should be noted that there are some e-disk software (such as call enhancement, screen saver, etc.) and font operation that boot up the permanent memory, and if the font is running, it is invalid to format it with this method. Therefore, before the soft grid, close all these software, and delete the Chinese font file before the format can be successful. Font files are generally under system fonts, delete font files, please use handyfile to change the fonts directory, and then delete!

Hard grid machine: This method is generally used when the system is so chaotic that it can't be turned on or soft formatting has no effect, this formatting is more completely shut down, press and hold the call key when you turn on the 3rd key * key and then.

Press the power on key and don't let go until "formatting..." appears on the screenAfter that, you can let go. This formatting is more thorough and does not cause invalid formatting.

Other: Turn off and press the power button, without any prompt to start the grid.

Precautions: Sufficient power must be guaranteed when formatting, and generally it should be operated under full power.

It's a good idea to uninstall all the software and see if there are any similar "system errors"! If there is no similar "system error", then proceed to the grid! Do not attempt to shut down the machine during the grid, do not plug in the charger, etc. Also, try to give priority to the soft grid.

The software part that was originally installed on the MMC card will be affected after the grid machine, so under normal circumstances, the important data of the MMC card will be backed up and then formatted, and all the programs saved in the E disk will be reinstalled after the formatting of the mobile phone is completed.

In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management Remove the MMC card Check if there is a system error Format the phone Install the MMC card Format the MMC card (the phone at this time is the purest basic system) Install the programs that need to be installed Restore contacts is completed.

They're all soft, sometimes it doesn't work, my friend tried it, and then I helped him hard-track ......Add me and I'll teach you 529095425

In standby mode, enter * in the soft bar, and press the hard bar at the same time in the shutdown state.

Dial the digit three.

Power on button.

This is what I found on the manual of the N97mini, the menu tool memory card option....

The S60 machine may be mostly about the same! Thank you for adopting.

Format your phone, reinstall your various software, don't install it on your phone, all of it is installed on the card, so that even if your phone is formatted, you still have the software that has been installed!! Soft grid machine:* Hard chrome is more troublesome,Press and hold 3,Answer,Hang up,* Turn on at the same time,Boot a line of English appears after loosening,If there is nokia, there is no grid machine success!!

Just go to customer service! As long as the purchase is not more than one year old, you can brush it for free! If you exceed it, you will break some money!