How to set the window preview effect like Vista in ubuntu?

Enable Driver:

To enable 3D effects in Ubuntu LTS (Hardy Heron), you must first install the driver of your graphics card. I'm a newbie and don't have another ** driver installation, because ubuntu comes with a large number of drivers, and the graphics card driver installation is carried out through the "Restricted Driver Manager", which greatly reduces the difficulty of installation. Therefore, the installed driver is also the restricted driver that comes with ubuntu.

Open System = > System Management = > Hardware Driver.

Once the driver is installed, Ubuntu will prompt you to restart your computer.

After you restart your computer, Ubuntu enables the graphics driver you just installed.

2.Ubuntu to install compiz fusion

Open Synapx Package Manager (System = > System Management = > Synapx Package Manager).

compizconfig-settings-manager

emerald

If you can't find it, install it yourself: use sudo apt-get install in the terminal, followed by the software name.

For example, sudo apt-get install compizconfig-settings-manager

3.Configure Compiz Fusion

You can now use the CompizConfig Settings Manager to configure the 3D effects of the Compiz Fusion. Click System -> Preferences ->Advanced Desktop Effects Settings:

Now you can use it to set up Ubuntu's 3D effects to your liking! Includes window preview effects.

General Linux must partition:

swap: The format is swap, and the size is twice the size of the physical memory, if you have a large memory, double the size is OK.

Root directory: The installed system files, installed software, etc. are all placed in the root directory, if the hard disk is large enough, try to allocate more to it.

home: The user directory, the number of files in this directory will increase day by day, so try to allocate as much space as possible, if the hard disk space will be increased in the future, it is best to mount it.

directory. The above partitions must be there, especially the swap partition. The home partition strongly recommends that you divide one, at least it won't have a bad effect.

boot: The files required for startup are in this folder, in fact, it doesn't need to be too big, hundreds of megabytes are enough. It's okay not to have a separate partition for it.

The system that does not support this software vista is like this, there are many software that it does not support.

Modify the boot grub file under Ubuntu, find the default 0 line, and change the Windows entry to 0 minus one when startup.

Note that this file requires root privileges, such as:

sudo gedit /boot/grub/

If you have both Ubuntu and Windows installed on your computer, you can use the StartupManager software in Ubuntu to adjust the order of the boot menu, such as setting Ubuntu or Windows as the default operating system, and setting the waiting time for selection.

How to use: Open "Startup Manager" in the menu "System Administration" and set it accordingly.

Here's how:

1. Enter the ubuntu system. Open the terminal and enter the command $sudo vim boot grub to start the list file with the vim.

2. In set default=..., is to set the default startup of the system, set default="5", that is, the default computer runs the system with the number 5, where 5 is the location of the Windows system in the boot menu, and the position number starts from 0.

After the setting is completed, save and exit, and the next time you boot the system, the Windows system will be started by default.

Modify the boot grub file under ubuntu, swap the Ubuntu and Vista positions in it, save and restart, and back it up before modifying.

In the grub configuration file, change the number in the default line to the order value of the vista entry.

Under Ubuntu, the default size of the terminal window is 80 24, and depending on each person's preference, you may need a larger processing window, and you don't want to manually resize the window so troublesome every time, you can set the default size of the terminal window by:

First, open the terminal and type: sudo gedit usr share vte termcap xtermfind :co 80:it 8:li

80 is high, 24 is wide, and you can see the effect when you open the terminal after the modification is saved! (These are set according to your own preferences) will work on all terminals, and it will also work on gnome terminals.

Install copmiz.

If this software is not in it, it means that there is a conflict between the fire effect and the desktop environment, and the installation may cause the system to crash or something. It's better not to install it.

VMware Network Selection and Ubuntu 20 04 Network Configuration Tutorial.

The network is set to NAT, and I experimented on a Linux host-linux virtual machine, which is a virtualbox

I also encountered this problem, I am in the same situation with you, using a wireless network, so the virtual host can not be connected to the Internet. I checked a lot of information, but it didn't work. Landlord, have you succeeded?

1. For wireless routing, the NIC of the virtual machine should be set to NAT, and the NAT and DHCP services of the VM should be turned on. These settings are the default for installing the version of VMware.,If you use green Chinese, pay attention to yourself.。

2. Ubuntu can be set to automatically obtain the IP.

With VMware, there is basically no need to set up anything, as long as the network mode is NAT at the time of installation, the virtual machine can share the host network.

It shouldn't be.,My virtual machine and wubi installation can't go online.,I've tried a lot of methods and it doesn't work.。

1. Select NAT connection, 2. Automatically connect to the wireless network.

3. Test whether the network is connected and ping

Set ubuntu 20 04 to Chinese.

If you have a dual Windows + Ubuntu system, when Ubuntu has a problem and needs to be reinstalled or deleted.

Do not format the Linux partition directly, otherwise it will cause the Windows system to be unable to enter.

Before deleting the Linux partition, we need to write the boot information to the MBR. to start Windows

2.Unzip and put the file in the root directory of the C drive.

3.Open the cmd command window, enter the root directory of the C drive, (with cd command), and then enter the command mbrfix drive 0 fixmbrr, and confirm it again.

When you open your eyes, you will find that the system will directly enter Windows, and then you can delete the Linux partition.

If you have UAC enabled in Vista or Windows 7, please run cmd as administrator

Let me tell you the answer! You need to install compiz-fusion, go to synaptic and look for compiz, it seems that there is a compiz add-on or something, I forgot. Then add something like compizmanager, and you'll be able to change the desktop effects in there.

If you're using Unity, you'll need to log in to UbuntuClassic to enable Compiz to manage desktop effects.