How to add seconds to the chess clock, and how to set the seconds to add seconds

The full chess clock plus second refers to the setting of the chess clock time during the match.

Adding seconds refers to adding 30 seconds to each disc that is pressed by the clock, or how many seconds it is set; The countdown system is that the time is set to how many minutes each side enters the countdown, and the chess clock adjusts the countdown time, and then the loss is judged; The lump sum system refers to how many minutes each side has, no longer counting seconds and adding seconds, and then directly judging the loss.

In the plus second system, each side has a fixed amount of time, and at the same time, a certain amount of time is added for each move. This is the rule of time proposed by the late chess wizard Fischer, so it is also called the "Fischer plus second system". Because of its scientific nature, this time has been used in most chess competitions.

Compared with the countdown system and the lump sum system, which are commonly used in Go competitions, the extra second system has its obvious advantages.

How to tune the clock:

1. Power off. 2. Press the special shaped button in the middle of the side that looks like an electronic component. (OP1 and so on will appear).

3. Press the up and down adjustment button to adjust to the desired OP"Several"。

4. Press the OK button.

5. Press the figure 8 button.

6. Press OK 2-3 times.

Bell pause: 1. Press the pause button of the two vertical roads.

2. Press OK to resume operation.

Bell restoration, initial adjustment state:

1. Press the pause button of the two vertical lanes.

2. Press the special button with an arrow in the lower left corner.

3. Press the leap-shaped button in the upper left corner.

Do not show: 1, run.

2. Pause button.

3. The key in the lower left corner.

4. Special buttons with small horns, slashes and dots in the lower right corner.

Restore without display:

1. The lower right button.

2. The upper left button.

Adjust the sound: 1. Enter the normal chess operation state.

2. Pause button in the lower left corner.

3. Special key for the small horn in the lower right corner.

There are specific instructions at the bottom of the clock. op1-2-3-4 isLump sum system；OP5-6 is a delayed second system; op7-8-9-10 is the cumulative plus second system; OP11 is a time-limited system; OP12-14-15-16 is a multi-time step system.

In the lump sum time limit competition, it can be divided into two methods: single-time limit and multiple time limit. A single time limit means that each team is given only one time limit in a match, within which all matches must be completed. If it is not completed, the player who is the first to use up the time limit will lose.

Multiple time limits are given to each side of a match in turn, and at the end of each time limit if the match has not yet ended, the next time limit is moved on. It may also stipulate that a certain number of actions must be completed within each time limit. The use of each time limit to complete the situation is also called counting.

If the move is not completed within the time limit or the match is not finished when the last time limit is reached, the player who has used the last time limit first will lose. During the countdown time, if the player leaves the table, the referee shall continue to count the seconds according to the regulations, and the overtime will be awarded a loss.

Refers to the setting of the chess clock time during the game, and the extra second refers to the addition of 30 seconds when each disc is pressed by the chess clock, or how many seconds are set; The countdown system is that the time is set to how many minutes each side enters the countdown, and the chess clock adjusts the countdown time, and then the loss is judged; The lump sum system refers to how many minutes each side has, no longer counting seconds and adding seconds, and then directly judging the loss.

Dear, the Quanqi Chess Clock is an electronic timer that can be used in chess games such as chess, Go, and backgammon. In a competition, it is sometimes necessary to set up extra second rules to ensure that the game is fair and just. Here's how to set the full chess clock plus seconds:

1.First, press the "mode" button on the chess clock to enter the setup mode. 2.

Then, press the "+" or "-" button to select the "fischer" mode. In this mode, you can set an extra second rule. 3.

Next, press the "Mode" button and select the "Increment" option. 4.Press the "Min Chun +" or "-" button to set the time for each additional second.

For example, if you want to add 1 second at a time, set it to "0:00:01".

5.Press the "Mode" button and select the "Time" option. 6.

Press the "+" or "-" button to set the total time of the match. For example, if you want to set the game time to be 30 minutes, set it to "0:30:".

00”。7.Finally, prepare the stool and press the "start stop" button to start the timer.

When the game is in progress, if you need to add seconds, simply press the "+" button. The clock will automatically add the time you set for each extra second after each press of the "+" button.

Summary. The Quanqi Chess Clock is a kind of Go match timer, and the setting method is slightly different for different brands and models, but the general setting method is as follows: the first step, before the start of the game, press the "Set" button to enter the timer's setting mode.

In the second step, use the up and down arrow keys to choose how you want to increase the number of seconds (e.g. add 1 second or 5 seconds each time). Step 3: Press the "OK" button to confirm the settings. Step 4: When the game is in progress, after the pieces fall, press the corresponding button of the timer and the timer will start ticking.

Step 5: When you need to add seconds, press the "Add Second" button on the timer to gradually increase the seconds according to the number of seconds you set.

The Quanqi Chess Clock is a kind of Go game timer, and the setting method is slightly different for different brands and models, but the setting method is as follows: the first step, before the game starts, press the "Set" button to enter the timer's setting mode. In the second step, use the up and down arrow keys to choose how you want to increase the number of seconds (e.g. add 1 second or 5 seconds each time).

Step 3: Press the "OK" button to confirm the settings. Fourth, when the game is in progress, after the pieces fall, press the corresponding button of the old remaining timer, and the timer will start counting the socks. Step 5: When you need to add seconds, press the "Add Second" button on the timer to gradually increase the seconds according to the number of seconds you set.

Of course, please note that the operation method of different models of timers may be different, so it is best to read the empty bird dismantling instruction manual first, or the after-sales service personnel of the Liandou jujube timer to get a detailed setting operation guide.