Which biomass pellet machine is good, and how much is a set of biomass pellet machine?

The production of biomass pellet fuel requires a lot of equipment, which can not be solved by a machine, and the amount of equipment used depends on the situation of raw materials, as well as the requirements for the degree of automation and environmental protection. Let's talk about the full set of equipment in general. 1. Crushing equipment:

The large pieces of raw materials are processed into a few centimeters in size, and the common ones are all kinds of wood chip machines, tyrannosaurus crushers, etc., 2. Crushing equipment: crushing materials to below 15mm, common ones are high-efficiency crushers, multi-functional crushers. 3. Drying equipment:

The moisture of the material is dried to less than 15%, mainly the drum dryer. 4. Granulation equipment: the core equipment for pressing raw materials into granules, centrifugal high-efficiency granulator.

5. Cooling equipment: the particles are brought to room temperature, and the counter-flow cooler is generally used. 6. Other equipment:

Silo, conveying equipment 、...

The biomass pellet machine presses these raw materials into biomass fuel pellets is not only a change in physical form, but also a change in the internal molecular combination, which is the core thing, which not only compresses the volume but also increases the combustion value. To put it bluntly, it is a pellet machine, which is a general term, which generally uses things like sawdust, straw, chaff, etc. The biomass pellet machine made by Zhengzhou Lianming Machinery solves the social problem of more than 70 categories of more than 300 kinds of raw materials such as waste, straw, furniture factory scraps, sawdust, shavings, rice husks, branches, bamboo chips, peanut shells, bagasse, distiller's grains, etc., as well as the social problem of "double ban" of urban plant waste, which not only effectively improves their comprehensive utilization rate, but also provides environmentally friendly and energy-saving new environmentally friendly fuels for industrial production, biomass power generation, restaurants and hotels, and residents' lives.

Biomass pellet machine, one to six pay attention to strength.

Biomass pellet machine, pellet machine equipment, pellet machine.

As of 2020, the raw material is dry sawdust, and the equipment required: biomass pellet machine, belt conveyor, sieve,Equipment cost: less than 150,000,000The raw material is dry branches, the required equipment:

Crusher, crusher, biomass pellet machine, belt conveyor, cooler and other auxiliary equipment, equipment cost:Up to 250,000.

The raw material is the moisture of the straw required equipment: crusher, crusher, dryer, biomass pellet machine, belt conveyor, cooler and other auxiliary equipment, equipment cost:Around 400,000.

It's hard to say how much a set of biomass pellet machine will invest, which depends on the moisture and output of the raw materials to determine the type of pellet machine equipment and other auxiliary equipment to match. All equipment is for the service of raw materials, and inspecting the raw materials is the key step to make pellets.

Biomass pellet machine is a kind of biomass energy pretreatment equipment. It mainly uses biomass such as wood chips, straw, rice husks, tree bark and other wastes from agricultural and forestry processing as raw materials, and solidifies them into high-density pellet fuels through pretreatment and processing. Biomass pellet machine is divided into flat die biomass pellet machine and ring die biomass pellet machine.

Pellet fuel is made by extruding raw materials such as wood chips and straw by using pressure rollers and ring dies at room temperature. The density of raw materials is generally about about, and the density of particles after molding is greater, and it is very convenient to transport and store, and at the same time, its combustion performance is greatly improved, reducing human dependence on fossil energy and atmospheric emissions, which has brought certain employment problems and economic benefits.

Fuel characteristics: characteristics of biofuels; The pellet fuel after molding has a large specific weight, small size, is combustion-resistant, and is easy to store and transport. After molding, the density calorific value can reach 3400 4800 kcal, which is a solid fuel with high volatile content and low sulfur content.

Fuel use: Formed pellet fuel is a new type of bioenergy, which can replace firewood, raw coal, fuel oil, liquefied gas, etc., and is widely used in heating, domestic stoves, hot water boilers, industrial boilers, biomass power plants, etc.

Main uses: civil heating and domestic energy: high fuel utilization rate, easy storage.

Biomass industrial boiler: As the main fuel for industrial boilers, it replaces coal burning and reduces air emissions and pollution. Power generation:

It can be used as a fuel for thermal power generation. Large-scale farms provide easy feed for storage and transportation.

Biomass pellet mill (machine for biomass pelletizing).

The biomass granulator has fast granulation and good effect, and the filter screen with special holes is designed to be carefully screened, and its friction filter rod can crush the sieve to filter solid particles, which is widely used in the pharmaceutical, chemical and food industries. This machine can replace the swing pellet machine, and is a new generation of pellet equipment.

The biomass pellet mill is mainly composed of feeding, mixing, granulation, transmission and lubrication system. Its working process is to require the water content of not more than 15% of the powder material, from the hopper into the feeding auger, by adjusting the speed of the stepless speed regulating motor, to obtain a suitable material flow, and then enter the agitator, stirring and steam mixing through the stirring rod for quenching, if you need to add molasses or grease, also from the stirring drum to add quenching and tempering with steam, the amount of grease added is generally not more than 3%, otherwise it is difficult to form, after quenching and tempering, the temperature of the powder can reach 64 85, and the humidity is up to 14 l6%. Then the iron impurities mixed in the powder are removed through the chute through an optional iron suction device, and finally enter the pressing chamber for granulation.

Hexie manufactures all the core process equipment on the ** granulation line, and also manufactures stand-alone equipment for the production of biomass pellets, solid fuel molding and waste pelletizing.

PMVB series.

PMVB520 biomass dedicated pellet mill is the best choice for biomass pellet producers to produce sustainable energy such as biomass fuel, waste pelleting, etc.

The machine is configured with a double motor drive, and the spindle is evenly stressed;

The flywheel effect of large pulleys makes the operation more energy-efficient;

The base poured by the whole machine runs more smoothly;

The main bearing adopts "SKF" bearing, which is durable.

The hexagonal door of PMVB520 biomass pellet mill is made of stainless steel lining, with few wearing parts, and the interlocking system of the pressure roller can easily and quickly adjust the gap between the pressure roller and the ring die.

The equipment is equipped with emergency pneumatic discharge bypass, overload protection safety pin, and ring die lifting device to meet the needs of users.

In addition, the PMVB series pellet mill is also the best choice for processing agricultural and forestry waste and household waste, which produces great environmental protection, social and economic benefits.

Product Model Ring Model No. (mm) Main Power (kw) Feeding Power (kw) Output (t h).

pmvb520 520 75×2

Note: The above production refers to biofuel 8mm ring die.