The watch was accidentally roasted by the fire, and the dial was lightly fogged

If the watch is accidentally roasted by fire and a light mist appears on the dial, it can be dealt with in the following ways:

1.Wear the dial with the dial facing inward and the bottom facing outwards for about two or three hours to allow the fog on the surface of the watch to gradually disappear.

2.Wrap it in a few paper towels or absorbent cloth and bake it with a 40-watt light bulb at a distance of 15 cm from the watch for about 30 minutes, and the fog on the watch will evaporate.

3.If the dial is only slightly foggy, you can also use a hair dryer to dry it or expose it to the sun.

It should be noted that there are certain deficiencies in the processing of these methods, and attention should be paid to when operating. If you cannot tell whether the surface of the watch is fogged up or whether water has entered the movement, it is recommended to take it to a watch repair shop for professional repairers to deal with it to avoid aggravating the damage of the watch and causing the watch to be scrapped.

If the fogging of the surface plate of the hand is not very serious, you can use your hands to massage it back and forth on the surface to make it eliminate the heat generated by friction.

If there is only a small amount of mist, it is recommended to pull out the watch handle and put the desiccant around the watch handle, which will make the water vapor volatilize faster and the fog dissipate faster or use a 40w bulb to bake 15cm away from the watch for about 30 minutes, and the watch needs to be wrapped in a thin cloth. If there is too much water vapor in the meter, it is recommended to send it to the after-sales service or a reputable maintenance point within 72 hours.

Try to avoid letting running water touch the handle when washing your hands. Avoid wearing a waterproof watch above 100 meters when taking a bath or rinsing it with a faucet, as the watch may be flooded due to uneven water pressure on the watch. It is also important to avoid wearing the watch in the bathroom or sauna, as water vapor can affect the internal operation of the watch or damage the waterproof performance of the watch due to thermal expansion and contraction.

There are generally five simple and feasible ways to fog up your watch:

1. Method 1: When the watch is fogged, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes. Note: Do not bake the watch glass close to the fire to avoid deformation of the watch glass.

2. Method 2: Put the watch glass inward and the bottom case outward, and wear it on your wrist for two hours. Use your body temperature to drain the fog, which is suitable for small amounts of fogging.

3. Method 3: Pull open the head (crown) of the watch, use granular silicone, or desiccant in a snack bag, etc., and put it into a closed container with the watch that has accumulated water, and take it out after a few hours. Or put the watch into the rice bag at home for a day, use the adsorption of rice to drain the fog must pay attention to the watch must be wrapped in glasses cloth or facial tissue first, to play a dust-proof role, the rice bag is a lot of fine dust, pull the head must be dustproof!

This method can drain the more severe fog.

4. Method 4: You can also remove fog vapor by basking in the sun. First open the back cover of the watch, then wrap the watch completely with a paper towel or moisture-absorbing flannel cloth, and take it to the sun for most of the day to remove the moisture in the movement.

If the watch is seriously flooded, it can be left for a longer time.

5. Method 5: After the watch enters the water, you can open the back cover of the watch first, if it is a quartz watch, remove the battery, and use a hair dryer to blow the watch at a low temperature. After blowing until it is completely dry, reattach the back cover.

When installing, you can also check whether the sealing ring is aging and broken, and remember that the back cover must be fastened if it is in good condition.

The fog will disappear temporarily after heating the watch, in fact, the water vapor does not escape from the case, it will run to a relatively cool position, such as the back cover or the heart.

To finally solve the problem of fogging in the watch glass, you need to open the back cover of the watch, dry the movement and case thoroughly, and then replace the waterproof rubber seal or reapply silicone oil to the rubber seal.

If there are mist water droplets in the table, it should be repaired in time to wipe off the fog water droplets to prevent water from entering for a long time, rusting of the parts, and overcolor of the surface. If there is occasionally a little fog, it will disappear naturally after the climate is dry, and it will not have a big impact on the heart.

Selection method:

One of the sensitivity check methods of the watch is to gently shake the watch that has not been wound to stop moving, and observe the movement of the second hand with the help of the power of shaking; If the second hand stops moving in a short period of time, it means that the watch can be fully loosened after full winding, and the sensitivity is relatively high;

If the second hand continues to move for a long time, it means that the watch cannot be completely loosened after full winding, the sensitivity is not high, or the internal mechanism is faulty.

When a normal watch turns the winding shaft of the upper shank, it feels looser at first, and gradually becomes tighter and tighter, and when it can no longer continue to rotate forward, it means that the mainspring has been completely tightened.

There is fog in the watch, indicating that there is moisture in the watch, and under normal circumstances, if there is a small amount of water in the watch, it cannot be observed by the human eye. Although the watch is sealed, there are still very small pores in the joint between the stem and the handle, the joint between the back cover and the case, and the joint between the case and the case, especially in the old watches. When washing hands, doing laundry, or on rainy days, moisture can soak through these pores into the case.

In addition, the temperature is high and the humidity is high in summer, so if the watch is suddenly cold, the air containing more moisture in the watch will condense into fog or water droplets, which will stick to the watch glass.

If there is fog or water droplets in the watch, it should be repaired in time, wipe off the fog or water droplets, or wrap the watch tightly with toilet paper or moisture-absorbing flannel, and bake it near a 40-watt light bulb (about 5 cm) for about half an hour, and the water in the watch will be discharged as water vapor. In addition, you can remove the fog vapor by basking in the sun, pull out the handle of the mechanical watch, and stuff the toilet paper or flannel around the handle, and take it to the sun for about 5 hours, and the toilet paper or flannel plug can remove the water vapor in the movement, so as to prevent water from entering for a long time, the dial is overcolored, and the movement is rusty. If there is a little fog by chance, it will disappear naturally when the climate is dry.

Finally, remind everyone that in order to prolong the service life of the watch, you should try to prevent fog or water droplets in the watch, do not wear the watch when washing clothes, face and bath, and pay attention not to be exposed to rain on rainy days.

A small amount of water or water vapor enters the watch, and when the temperature is high, the water is gaseous, and when the outside temperature decreases, the glass on the surface of the hand is at a low temperature, and the water vapor liquefies to form small water droplets.

The watch is fogged up in water, what should I do?! This is the reason why many people's watches hang up. There's nothing wrong with it, it's just that the water is fogging.

Watch experts point out that you should never put a beautiful watch in a drawer because of this small problem, it is very worthwhile. The easiest way to deal with this situation is to take the strap to the watch shop. Generally, professional watch shops, in fact, will provide some free watch cleaning and maintenance services.

If the machinery is not damaged, it only takes a few minutes for the watch to be refreshed with water and fogging. Don't be clever enough to bake your watch in a gas oven or come up with strange ways to dry it, as this may compromise the precision parts of the watch movement, but the gains outweigh the losses. The waterproof ring is not a panacea for swimming, bathing, surfing, or watching.

This is because what you are wearing on your hand is not an ordinary watch but a sports diving watch, so you can be so arrogant! However, experts warn you not to be too careless! Although the watch has a waterproof function, especially a special sports watch for water sports or diving, it is a first-class master of waterproofing, but consumers still need to pay attention to the waterproof watch with a waterproof ring, which has its limitations.

The main problem is to pay attention to the service life of the waterproof ring, the waterproof ring is like the tire of a car, there is a certain period of time for an average of two to four years, and the waterproof ring will lose its function. In case you don't pay attention, the watch suddenly gets into the water, and it is quite troublesome to repair. Therefore, don't forget to pay attention to the life of the waterproof ring!

How to avoid fading on the watch, the color on the watch is colorful, and the proper use can keep it fresh for a long time. When wearing this kind of brightly colored watch, you should pay attention to stay away from the high temperature environment, and avoid long-term sun exposure when not wearing, chemicals and oil stains are also killers that destroy the color and even the material, and a large amount of soaking water such as playing in the water, rain, and car wash will also bring adverse effects to the color, and after being soaked in salty sea water and sweat, it is best to wipe it clean immediately.

If it is a mechanical watch, it is best to wash the movement with high-grade gasoline and re-oil, otherwise the mechanical part of the watch will rust for a long time, or the quartz watch quartz oscillator will be damp. Your watch is a ruin.

In November 2021, my watch was fogged up and I couldn't see clearly, and I tried the online method to no avail. The next day, I went to a professional watch repair (I didn't sell a watch) to deal with it. After the watch cover is opened, the watch core is taken out and dried under the bulb for a while, the watch glass is dried with paper, the ear wash is used to blow the soot, the assembly is back, and the watch is replaced with waterproof paste, which costs 10 yuan.

The anti-fogging agent for lenses like lipstick can really prevent the lenses from fogging, and I took this wave of operation

If the water ingress is not serious, but there is a layer of fog in the watch glass, you can wear the surface face inward and the bottom shell outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

Or use granular silicone to put the watch in a closed container with the water that has accumulated water, and after a few hours, take out the watch and the water will disappear. This method of processing is simple and economical, and does not compromise the accuracy or longevity of the watch. The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

That's if there is moisture in your watch, just go to the watch store to fix it, don't delay it for too long to repair, otherwise it will shorten the life of your watch! o(∩_o~

Remove the lid and heat it up for a while before closing the lid.

Remove the watch case and blow it back and forth on the parts with a hair dryer for 10 minutes, and the effect will come out.

There is moisture in the watch, just use the sun to dry it. If it really doesn't work, take it and fix it!

Just unscrew the cover on the back of the watch yourself and blow it down with a blow dryer.

If you find that the watch is foggy and foggy, you can see it clearly, so you can take it to a professional watch repair (not selling watches), deal with it and change the watch to put the waterproof paste, and the money for half a cup of milk tea will be done!

How to deal with water ingress into the watch:

Method 1: When water enters your case, you can use a granular substance called silicone to put it in a meter-closed container with the watch that has accumulated water, and after a few hours, you can take out your watch, and the water will disappear. This method is simple, convenient, and economical, and does not compromise the accuracy or longevity of the watch.

In addition, the silica gel that has absorbed water more than 100 times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used repeatedly and repeatedly.

Method 2: If the mechanical watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near a 40-watt light bulb, and bake for about 30 minutes, and the water vapor in the table can eliminate the problem. Do not bake the watch close to the fire, so as not to deform the watch by heat.

If there is water in the watch, you still have to go to the repair shop to wipe the oil and repair it to prevent the parts inside from rusting.

1.Wrap the table in absorbent paper and bake under a 40-watt light bulb.

2.Wearing the watch backwards for 1-2 hours can also remove fogging.

3.The watch can be placed in rice or a substance with the ability to absorb water for 1-2 hours.

The watch will fog up and remove it completelySolution:

1. Fogging solutions under normal conditions:

At this time, you only need to put the watch in a ventilated and cool place, let it stand for a while, and the fog will dissipate. Another simple way is to wear the dial inwards and the bottom of the case outwards for about two or three hours, which can also achieve the effect of removing fog.

Second, there are obvious water droplets or water ingress in the surface, solution:

1. The easiest way is to put the watch in the rice jar and stand still for a day, and the mist of the watch can be sucked away.

2. Similar to the rice cylinder drying method, use silica gel desiccant or electronic regeneration hygroscopic card for camera. In the same way, put the watch and the silicone granular desiccant or moisture absorbent card in the same airtight container, and after half a day, you can take out the watch. The advantage is that it absorbs water quickly, and the silicone desiccant and the hygroscopic card can be used repeatedly without affecting the performance and accuracy of the watch, making it a good choice.

3. Light bulb method. Wrap your watch in toilet paper or absorbent flannel and bake it four or five centimeters away from a 40-watt bulb. However, it is important not to bake the watch on fire, as uneven heating or high temperatures can easily deform the case or damage the parts.

4. Dry with a hair dryer, but use a low speed, gentle wind to dry slowly, otherwise it is very easy to damage the parts, and blow until the moisture on the glass disappears.

5. In the most serious case, if the above methods cannot completely remove the water, then it should be sent to professional after-sales maintenance to wipe the oil and remove the moisture of the movement to avoid oxidation and rust of the parts and affect the life of the watch.