The Apple Watch accidentally got into the water and turned on normally

The Apple Watch is waterproof.

If it can be turned on normally, it means that there is no problem.

Summary. Hello, approach.

1. If the watch is soaked in water, you can use several layers of toilet paper or fluffy cotton cloth that is easy to absorb moisture to wrap the watch tightly, put it near a 40-watt incandescent lamp about 15 cm, bake for about 30 minutes, and the water vapor in the watch can be water vapor. Avoid baking the watch on the wrist close to the fire, so as not to cause the watch to suffer thermal deformation.

Way. 2. The watch is worn inwards and the bottom case outward, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to send it to the watch shop immediately to wipe the oil and sweep away the nutrients of the movement to prevent the parts from rusting.

Way. 3. Use granular silicone to put the watch on the wrist that has accumulated water into a tightly sealed utensil, and after a few hours, take the watch on the wrist, and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has absorbed water many times can be dried at 120 for several hours, and the water absorption experience is renewable, and it can be used again and again.

How to fix water in the Apple Watch.

Hello, approach.

1. If the watch is soaked in water, you can use several layers of toilet paper or fluffy cotton cloth that is easy to absorb moisture to wrap the watch tightly, put it on a 40-watt incandescent lamp about 15 cm away, bake for about 30 minutes, and the water vapor in the surface of the pants can be steamed. Avoid baking the watch on the wrist close to the fire, so as not to cause the watch to suffer thermal deformation. Way.

2. The watch is worn inwards and the bottom case outward, and the water vapor can be eliminated after two hours. If the water ingress is severe, it is best to send it to the watch shop immediately to wipe the oil and sweep away the nutrients of the movement to prevent the parts from rusting. Way.

3. Put the granular silicone with the table on the wrist that has accumulated water into a tightly sealed vessel, and after a few hours, take the watch on the wrist, and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch. The silica gel that has absorbed water many times can be dried at 120 for several hours, and the water absorption experience is renewable, and it can be used again and again.

Hello, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it near a 40-watt light bulb about 15 cm, bake for about 40 minutes, and the water vapor in the watch can be eliminated. Do not bake the watch directly near the heat, so as not to deform the glass by heating. Because although there is no water vapor on the dial, there may still be water in the movement, and the movement will rust and cause damage after a long time.

After the watch is flooded, it is recommended to find a professional repair outlet as soon as possible for the master to check and deal with it, which can reduce your unnecessary losses.

Apple Watch Water Inlet Treatment Fang Shan Wu Fa:

Use a hair dryer to blow at a long distance, which is conducive to the evaporation of water in the table; Send it to the repair shop and spend money directly to deal with it. Apple Watch should avoid:

Falls or other shocks; prolonged immersion in water; Wear when swimming or bathing; contact with pressurized water or high-speed water flow or stools such as showering, water skiing, wakeboarding, surfing, jet skiing, etc.; Wear it in a sauna or steam room.

Summary. The Apple Watch can't be turned on when water is in, so first of all, take emergency rescue measures as soon as possible to avoid damage to the greatest extent. Please remove the watch from the water immediately and shake gently to drain as much water as possible.

Then, gently wipe the surface and buttons of the watch with a soft, dry cloth, making sure to wipe the moisture dry. Please do not use a hair dryer or heating device to speed up the drying process to avoid further damage. If the watch still won't turn on, it is recommended that you place it in a well-ventilated and dry place for 24 to 48 hours to allow it to dry further.

During this time, do not attempt to turn on the battery or plug in the charger as this may cause a short circuit in the circuit. If none of the above methods solve the problem, I recommend that you contact Apple customer service or send your watch to a professional repair shop for repair. They can perform more in-depth inspections and repairs on the watch to restore its normal functioning.

Remember to mention that the watch may have been soaked in water so that they can provide more accurate assistance. Hope you find these guides helpful and good luck!

The Apple Watch can't be turned on when water is in, so first of all, take emergency rescue measures as soon as possible to avoid damage to the greatest extent. Please remove the watch from the water immediately and shake gently to drain as much water as possible. Then, gently wipe the surface and buttons of the watch with a soft, dry cloth, making sure to wipe the moisture dry.

Please do not use a hair dryer or heating device to speed up the drying process, as this may cause damage to the next bucket of goods. If the watch still won't turn on, it is recommended that you place it in a well-ventilated and dry place for 24 to 48 hours to allow it to dry further. During this time, do not attempt to turn on the battery or plug in the charger as this may cause a short circuit in the circuit.

If none of the above solutions solve the problem, I recommend that you contact Apple customer service or send your watch to a professional repair shop for repair. They can perform more in-depth inspections and repairs on the watch to restore its normal functioning. Remember to mention that the watch may have been soaked in water so that they can provide more accurate assistance.

Hope you find these guides helpful and good luck!

Can you tell us more about that?

The Apple Watch can't be turned on when it gets into the water, and the emergency rescue measures include taking out the watch, gently shaking the drain, wiping the surface and buttons with a drying cloth, avoiding the use of hair dryers or heating devices, and if it can't be turned on, it can be placed in a dry place for 24-48 hours, without trying to turn on the machine or plug in the charger to avoid a short circuit in the circuit. If the problem is not solved, it is recommended to contact Apple customer service or send it to a repair shop for repair. Good luck!

Summary. After the Apple Watch gets water, be sure to turn off the power as soon as possible, then use a vacuum cleaner to suck the water out of the case, strap and surface, and finally put it in the rice jar, put it in the refrigerator and refrigerate it overnight to prevent moisture from seeping into the movement, then take out the watch, wipe the surface of the case with a rag, then use a hair dryer to dry the water in the watch, and finally put it in the rice bowl to absorb the remaining water and keep the dial dry, so that you can repair the Apple Watch.

After the Apple Watch gets into the water, be sure to turn off the power as soon as possible, then use a vacuum cleaner to suck the water out of the case, strap and surface, and finally put it in the rice jar Huai Jing, and put the lead in the refrigerator for one night to prevent moisture from seeping into the movement, and then take out the watch, wipe the surface of the case with a rag, and then use a hair dryer to dry the lead in the watch to resist moisture, and finally put it in the rice jar to absorb the remaining water to keep the dial dry, so that the Apple Watch can be repaired.

Fellow, I really didn't understand, I can be more specific.

1. Disassemble the Apple Watch: First, please turn off the Apple Watch, then open the hold-down screws of the Apple Watch and remove the Apple Watch; 2. Clean the Apple Watch: Wash the Apple Watch with water or ethanol, do not use solvents or strong lye; 3. Drying Apple Watch:

Place the Apple Watch in clean, dry air and wait for its megana to dry completely; 4. Check the Apple Watch: Check the shell and internal circuit board of the Apple Watch to make sure there are no water or damaged parts; 5. Install the Apple Watch: Install the disassembled Apple Watch parts, and then start the Apple Watch, if it can be used normally, it means that the Apple Watch BiChain repair is successful.