CDR file saving problem, how to get back the CDR file if it is not saved and accidentally closed

4. During the installation process, the progress will be a little slow, so please be patient.

5. After the installation of CorelDraw X8 is completed, click "Purchased" and enter the serial number in the selection.

6. This is the keygen in the compressed package that you want to open, click to select the version as "CorelDraw Graphics Suite X8", and then fill in the serial number generated below into the interface of the software.

7. After the installation is completed, the system will be installed during the installation process. net, you may be prompted that you need to reboot your system to continue the installation, please follow the prompts.

It is impossible to get it back completely. Because I didn't save it. However, you can go to the CDR's temporary folder and look for it.

CDR will be automatically backed up every once in a while, and it is stored in temporary files like a sun letter C: Documents and Settings Administrator Local Settings Temp Although this disk cannot be completely recovered, the files that are automatically backed up in the near period of time can be found.

The CDR document that was not saved before the shutdown is in the location.

When the CorelDraw software encounters a crash, causes an error, or exits abnormally, CorelDraw can automatically save a backup copy of the drawing.

You can set the time interval for automatic backup of files, and you can specify the location where you want to save files in a temporary folder (the default location) or in a specific file.

1. Find CorelDraw on the desktop and hit Gaokai.

2. Open CorelDraw, View - Settings - Guide Line Settings or shortcut key Ctrl+J.

3. The box of options for Bi Jian's words appears, and select "Save Options".

4. Check whether the file is backed up, and the location of the backup, if you don't change the save location, by default, in the location of C: users admini 1 appdata local temp, open the backup file a few feet, and you can retrieve the file.

Summary. Dear, if your CDR can't be saved or saved as, here are the reasons and solutions, the specific methods are as follows:1 The file is being used:

Close any programs that have CDR files open before attempting to save or save as. 2. The path or file name is invalid: Make sure that there are no special characters in the file name or that the file save path does not exceed the limits of the operating system, for example, the file name or path cannot contain special characters such as slashes and backslashes.

3 Incompatible Software Versions: If you try to save a later version of the CDR file in an earlier version of the CorelDraw software, you may experience issues such as saving errors or incompatible formats. Try saving the CDR file to an earlier version, or upgrade your CorelDraw software to support a later version of the CDR format.

4 File Corruption: If the CDR file itself is already corrupted, it may result in not being able to save or save as. Try to repair it using the recovery tool that comes with the CorelDraw software or a third-party file repair tool.

Dear, if your CDR can't be saved or saved as, the following are the reasons and solutions, the specific methods are as follows:1 The file is being used: Please close all programs that have opened the cdr file, and then try to save or save as.

2. The path or file name does not conform to the imitation method: Make sure that there are no special characters in the file name or that the file save path does not exceed the limit of the operating system, for example, the file name or path cannot contain special characters such as slashes and backslashes. 3 Software version incompatible:

If you try to save a higher version of the CDR file in an earlier version of the CorelDraw software, you may experience issues such as saving errors or incompatible formats. Try saving the CDR file to an earlier version, or upgrade your CorelDraw software to support a later version of the CDR format. 4 File Corruption:

If the CDR file itself has been resistant to corruption, it may result in it not being able to be saved or saved as. Try to repair it using the recovery tool that comes with the CorelDraw software or a third-party file repair tool.

CDR is the file grid of CorelDraw, generally speaking, after opening the CDR file in CorelDraw software, you can save or save as a CDR file by selecting the "File - Save As" or "File - Save" command, you can try to solve it by following the above methods. <>

The cdr file is saved out so big, it is caused by a setting problem, and the solution is as follows:

2. After the selection is completed, click the file in the upper left corner --- export command, and the shortcut key is bright.

ctrl+e。

3. Select the ** format that needs to be exported, generally commonly used is png or jpg.

4. Then at the bottom of the page, Jing Mu Qi wants to check the "only selected" command issued by the export command.

5. Then adjust the quality of **, click OK, and you can view the saved file separately in the saved path.

1. When saving the file, the software pop-up window prompts that the save failed.

2. When copying a file to another file, it will prompt "File copy error, temporary drive or output drive may be full".

3. At this time, it is basically determined that the hard disk where the software is located is almost full, and the remaining space is less than the capacity of the file itself, so it cannot be saved.

4. Delete some redundant files from the hard disk where the software is located, and empty the **station** station, so that the hard disk has enough space.

5. If you see that the hard disk has enough space to save the file, click Save.

The cdr file cannot be saved, it can only be saved, which is caused by a setting error, and the solution is as follows:

1. First find the damaged CDR X360 that was installed earlier.

2. Then click [Uninstall] on the right to uninstall the CDR.

3. Then restart the computer and reinstall the CDR again. Then open 360 and select Functions at the top.

4. Find [Traffic Firewall] and click to open it.

5. Find CDR X8 and select [Disable Network Access] on the right.

6. After prohibiting, you can see that there is an additional forbidden mark on the icon, re-run the CDR again, and find that there is no problem.

If you have saved to a path and the file has not changed, you can't save it, but if you have saved it to a path and the file has changed, you can save it! Have you ever revised it? You can save it again after you have modified it! Can you store it in the first place? Impossible!

CorelDraw (CDR) files cannot be saved and can only be saved because the CDR file is read-only, or the CDR main program has crashed.

1. When the CDR file is a read-only file, it can still be saved, but the subsequent file cannot overwrite the source file for storage (the source file is write protected), and can only be saved, which is a normal situation.

2. When the CDR main program crashes, you can save the file, the reason why you can't overwrite the source file storage is because the main program has crashed, if you overwrite the storage, it will completely collapse in the storage process, not only can not save the progress, but also easily damage the source file, so you can only choose to save it at this time.

First determine the file in your CDR, in addition to the one on your **, whether there is a transparent file in the blank space on the right or a small dot, line, it is very likely that there is a small thing in the blank place that will make you save this situation,。 Shrink the ** to a very small size,Use the selection tool to make a large area of the overall box.,Check if there are any other things that haven't been deleted.。。 After the inspection, press the P button on the first floor to center it.

You put**shrink and then save to try to save one is **format jpg and one is software format cdr you try.

CDR can't be saved, saved, exported, imported, and the click is unresponsive due to a software error, and the solution is:

1. If you can't save it when you click "File" when you open CDR because there is no content in the file, you can click "Save As" instead of clicking "Save".

<>3. If you click "File", save and save as are grayed out, and you can't save or save as your own new file.

4. After logging in, it is a green portrait that means that you have logged in, and it is not a gray state when you click Save and Save as in the file, you can save or save as the file.