What should I do if there is no available traffic after the wireless router is connected?

Problem 1: All WAN port parameters are 0 and the connection is always in progress, but the connection cannot be successfully (log in to the management interface of the router and click Running Status >> view the WAN port status);

Solution: 1. Check the line, if the line is connected correctly, but the WAN port indicator is not on, please check whether the WAN port wiring is in poor contact, etc., and try to replace the network cable connected to the WAN port;

2. Confirm that the password is entered correctly, click Running Status >> WAN port status on the management interface of the router, if the WAN port does not get the IP address, the page will have a prompt for the reason of dialing failure, modify it according to the prompt;

3. The broadband service provider binds the MAC address, connects the computer that was connected to the broadband Internet access separately with the LAN port of the router (here it must be connected by wire), and logs in to the management interface of the router. Select Network Parameters >> MAC address clone, click Clone MAC address. When the MAC address is the same as the MAC address of the current management PC, click Save and Restart the Router.

Solution: 1. The computer needs to be set to automatically obtain the IP address - if the computer has automatically obtained the IP address, but the IP address obtained, please disable the local connection or wireless connection corresponding to the computer and then enable it.

2. Check the router's Internet access control - the router's parental control and Internet control (some routers are set by firewalls) function can restrict the Internet access permission of the intranet computer, please set the function according to the actual needs, if it is not necessary, you can not enable the function. Here's how to set it up:

1) Turn off Parental Controls - Log in to the router management interface, click the Parental Controls settings page, select Disable and Save.

2) Turn off Internet Access Control - In Security Settings >> Internet Control, make sure that Turn on Internet Control is unchecked, and click Save.

3. Check the browser settings - please check the browser settings, the check method is as follows: Disable dial-up connection: Open IE browser, click Tools >> Internet Options, select Connect>> never dial-up connection; Disable Network**:

Click Tools >> Internet Options, select Connect >> LAN settings, make sure none of the three options are checked, and click OK.

After setting up, try to open the browser to surf the Internet;

4. Change the browser or computer - try again after changing the browser (using Firefox, Google Chrome or other browsers), if you still can't access the Internet, try to change the computer for comparison and testing;

With wireless? Why use traffic.

If you are using a Huawei phone.

If you can connect to Wi-Fi but can't access the Internet, you can use the following methods to troubleshoot:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

Follow the on-screen prompts to restore. (Note: This action will delete the WLAN and Bluetooth connection records).

2. If you are using a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please check if you need to log in through a browser** to register before you can access the Internet.

3. If individual applications are not available online:

Enter Traffic Management and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications, and it is recommended to check all the WLAN permissions that need to be used for applications.

If the above methods do not resolve the issue, we recommend that you back up your data.

The wireless network not working proves to be a problem with the router. It is possible that the bandwidth of the router is not good, and the router cannot access the Internet normally due to incorrect settings. You can go to the router settings to reset the broadband password and try the network again.

There are many possibilities for this problem: 1 It may be that the network cable of the wireless router is not connected well, and there is no network after the mobile phone is connected. 2It may also be the one in your mobile phone settings, the traffic data priority, so the wireless network connection, or the data traffic. 3. It may also be caused by the limitation of wireless network personnel, that is, the wireless network icon is displayed, but there is no network on the Internet, or the network speed is too slow, which will also cause this situation, unable to access the Internet.

You can only use data and can't use the wireless network, it may be because of a problem with your wireless network, a signal problem with the wireless network, or a network problem with the wireless network.

This is a problem with the settings of the mobile phone, and the signal of the wireless network is not good.

What should I do if my phone can't connect to the data and can't access the Internet?

Dear, the reasons why the mobile phone is connected to the wireless wifi but cannot access the Internet are: 1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet. 2. Router problems, the router may be overheated or damaged.

3. Broadband arrears may lead to inability to access the Internet. 4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet. 5. There may be a problem with the mobile phone system, which may cause the connection to wifi but the Internet cannot be accessed.

Suggested solutions: 1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and eliminate the problem of wifi itself. 2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

Questions. Other mobile phones can be connected to the same network, but my mobile phone can't.

Dear, this is a problem with your phone.

There may be a problem with the mobile phone system, which causes the connection to wifi but cannot access the Internet. It is recommended that you take a look at the repair point.

It is recommended that you factory reset your wireless router and then set it up again.

1. The bus of the broadband network is connected to the WAN port of the router, and the LAN port of the router is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

1. Change the password and rule out whether anyone is rubbing your net.

2. Change the encryption mode to eliminate the slowness caused by the encryption mode conflict.

3. Upgrade the software version of the router to eliminate the cause caused by the old software version of the router.

4. Connect the number on the external line separately to see if it is still slow, if it is to contact the broadband operator for detection.

1. Turn off your router's DHCP function.

2. Change the LAN port address of your router to the network segment assigned to the first router generally.

3. Plug the network cable into the LAN 1 port of your router.

That's it. This is called wired bridging of routers.

Possible reasons why there is no data when connected to wifi are:

1. Router problems, the router may be overheated or damaged;

2. Broadband arrears, resulting in inability to access the Internet;

3. The wifi name contains Chinese, resulting in some computers unable to connect to the Internet;

Suggested workaround:

1. Eliminate the problem of wifi itself, and use other mobile phones or devices to connect to wifi to try whether you can surf the Internet.

2. Restart the router to try it, or restore the router to factory settings.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband account.

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

Show the connection instructions Your computer or mobile phone is connected to the router through the wireless network, but there is a problem with the router setting, or there is an error with the broadband connection coming in from outside, enter the router to see if the connection status is connected to the network! If you don't know how to set it, take a look at the router manual!

The question you are asking is not very clear, but it can be explained that if there is no traffic on the network connection, it is said that the network is only a connection on the physical link, and there is no data exchange, so there will be no traffic.

It may be that your router is connected to the Internet locally and is not connected, or in one case, there is no Internet account in your router.

The quality is not good, and I also have an intermittent one.

Turn off or unplug the router, plug it back in after 10 seconds to solve the problem, or restore the router to its factory design, but you need to reset the Internet user name and password.

Wireless routers generally don't have problems, you try instead. Generally speaking, it's a problem with cats, and cats are more likely to break than wireless routers.

I guess it's itchy! Try a few hammers.

Some software wifi can't be used, and the traffic can be used because wifi is interfered with.

Some software wifi can not be used, and the traffic can be used may be the connected wifi interference, especially the frequency band, the channel interference is very strong. Connect to another wifi network and try to see if it works. First confirm whether the APP software settings restrict the WIFI networking,At the same time, you can try to connect to other WiFi to open the APP normally,If you can open it often, it is recommended to restart the router and reset it to see if it can be solved。

The relationship between wifi and traffic:

Under normal connection conditions, mobile wifi will not steal traffic. This kind of wifi and mobile data do not interfere with each other, now wifi is automatically connected first, so you don't have to worry about traffic theft when connecting wifi normally.

If the wifi network status is not stable enough, the phenomenon of disconnection will automatically turn into a mobile data connection, which will naturally cause traffic consumption, but now the wifi connection is relatively stable, which may occur when playing games, but it can also be avoided. First, turn off mobile data after connecting to wifi, and then set some high data consumption software to use only in wifi environment. <>

It means that there is no problem with your mobile phone network, but there is an error in the wireless network, although there is a network connection display, but the lack is that it is not connected to the operator, resulting in no signal and no traffic, so it should be a problem with the router without a positive and argument line, let people overhaul it.

Sometimes wifi will be inexplicably not used, you look at the connected mobile phone card is not in arrears, if the mobile phone card can be opened a number of nuisance, it is possible that the network is under repair, you should be able to use it after waiting for an hour.