I have two wireless routers at home, but my mobile phone is connected but I can t access the Interne

Updated on technology 2024-02-09
17 answers
  1. Anonymous users2024-02-05

    Why use two routers? If you can't, you just connect the first router.

    The cause of the failure is the wrong WAN setting of the second router, and in the WNA settings of the second router, "Gateway" should be the LAN address of the first router, ie.

    Specifically, it can be set up like this:

    The first router LAN address is, if it is already untouched.

    The LAN address of the second router is set to , and if it is set, it does not need to be moved.

    Critical: The WAN port of the second router is plugged into any LAN port of the first router through the network cable, and the second WAN is set to automatically obtain the IP, and it is OK to save the settings, and DHCP does not need to be closed. Again, the DHCP of both routers cannot be turned off, and if it is turned off, there will be problems!!

    As long as the two router gateways do not conflict, the second router WAN automatically obtains the IP.

  2. Anonymous users2024-02-04

    Is it 2 wireless routers?

    Yes, you can connect your 2 routers in series with the wireless bridging feature.

    If you want to use a wire, you have to set your B router to dynamic IP mode. I changed the IP addresses of 2 routers. A router is set to B.

  3. Anonymous users2024-02-03

    You can log in with a static IP or not.

  4. Anonymous users2024-02-02

    Solution: Laugh wide rock.

    1. Restart the router;

    2. Log in to the router, enable the router DHCP service, and re-enable it if it has been enabled.

    3. Log in to the router with a smile, change the wireless network SSID number (wireless wifi name), it is recommended not to use Chinese characters;

    4. Reset the router (restore factory settings), reset dial-up networking, enable DHCP service, and set the wireless SSID number and password;

    5. Change a router, re-dial the network, enable DHCP service, and set the wireless SSID number and password;

    7. Re-install the system and then re-connect to the network (before reinstalling the system, be sure to back up important information in advance).

  5. Anonymous users2024-02-01

    There are three cases.

    bai:1.The computer has no DU line network card

    Title. 2.The wireless network settings of the computer DAO are stored back.

    Answer the question. The password was changed. The computer did not update the password.

    Solution:1Check the NIC Click the right click in the lower right corner of the network display to see the Network and Sharing Center dialog box appear, click Open Network and Sharing Center.

    2.Left-click to open Change Adapter Settings.

    3.You can find out whether your computer has a wireless network card, if there is one, as shown in the figure, if not, it means that there is a problem with the network card, and the network card needs to be repaired. If there is, it should be that there is a problem with the wireless network settings of the computer or the wifi password has been changed, and the computer has not updated the password.

    4.If the wireless network is a problem, right-click the wireless network icon and select Properties 5Open the configuration in the pop-up window.

    6.Another dialog box appears, make sure that the two allows are not checked in front of it, if there is one, cancel the password change, the computer is still the previous password, the computer will not remind the password error 8Find your wifi, right-click, and select Properties 9

    Check the display characters to view the password, if the password is not correct, change the password, according to the above can solve the problem.

  6. Anonymous users2024-01-31

    Connect your computer to your router.

    The reasons why baiwifi can't access the internet are: zhi

    1. The wifi itself is a problem, but it can be.

    The DAO is not connected normally to the DAO, resulting in the inability to return to the Internet.

    2. Router problems, A: The router may be overheated or damaged.

    3. Broadband arrears may lead to inability to access the Internet.

    4. The wifi name contains Chinese, which causes some computers to be unable to connect to the Internet.

    5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet.

    Suggested workaround:

    1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

    2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

    3. Contact broadband customer service to confirm whether there is any abnormality in the broadband account, such as arrears, recharge the broadband, and then dial up to connect.

    4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.

    5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings. See if that solves the problem.

  7. Anonymous users2024-01-30

    After reading your description, it shouldn't be a problem with the wireless router.

    Because the mobile phone can be used normally without a version of the online Internet), the right is likely to be the network setting problem of your notebook, in fact, you only need to use the [360 disconnected first aid kit] as shown in the figure below to detect and fix it, and it can generally be restored to normal.

  8. Anonymous users2024-01-29

    With the same wireless router, why can the mobile phone be connected to the wifi but the laptop can't? First of all, it's a matter of his setup.

  9. Anonymous users2024-01-28

    Click the network icon in the lower right corner of the computer, find the network you want to connect, click Connect, and then enter the password, if not, open the network icon on the desktop, and then set it up.

  10. Anonymous users2024-01-27

    Look at the wifi of the notebook is turned on, what kind of computer are you using, my computer has a wifi switch.

  11. Anonymous users2024-01-26

    It should be that there is a problem with the wireless network card of the notebook.

    Recommendation: Uninstall the driver for the wireless card before updating the installation driver.

  12. Anonymous users2024-01-25

    1: Possible driver issue. It's good to reinstall it :2: You turned off the wireless switch.

  13. Anonymous users2024-01-24

    OK. That's because your notebook is too old.

  14. Anonymous users2024-01-23

    First of all, you make sure that your home network is connected; Computers are able to connect to the Internet; If you can't restart the road DAO by the device attempt.

    2. If the computer version can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

    3. If the above cannot be solved: we set static IP4 for the mobile phone, and the wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

  15. Anonymous users2024-01-22

    Mine too.,Find someone who understands the IP of the computer.,Just change the IP of the router.

  16. Anonymous users2024-01-21

    After reading your description, it shouldn't be a problem with the wireless router (because the phone can use wireless Internet access normally), it is likely to be a problem with the network settings of your laptop, in fact, you only need to use the [360 disconnected first aid kit] as shown in the figure below to detect and fix it, and it can generally be restored to normal.

  17. Anonymous users2024-01-20

    2 4 Enter the router settings through the computer or laptop, and after entering the settings interface, you can enter or reset the router account and password.

    **Wifi portable wireless broadband tens of millions of products, complete categories, don't miss it!

    Ad 3 4 Turn on the wireless card of your computer or laptop, and in the Network and Sharing Center, find the option to change the adapter settings.

    Taiyo Yuden provides you with a solution to the wifi connection.

    Ad 4 4 Turn on the property of the wireless connection, set it to automatically get the IP, then disable the wireless connection, and then enable, let the computer or laptop automatically search for the signal of the router, and click to connect after the search is completed.

Related questions
16 answers2024-02-09

One uses the main port to access, and the other uses the LAN port to access.

8 answers2024-02-09

The first router is referred to as R1 and the second router is referred to as R2. >>>More

17 answers2024-02-09

1。The router cable should be correctly arranged2. First, set the host IP to the IP and the default IP address to see how it is on the router 3. >>>More

19 answers2024-02-09

Two ways: first check the IP assigned to your computer by the fiber router, for example, an integer in 2 254). >>>More

11 answers2024-02-09

1. Change Workgroup, My Computer, Right-click Properties, 2nd Item Computer Name Change User Workgroup, Make 2 Computer Workgroups Consistent. >>>More