The wireless router is installed, why only the computer that sets up the router can access the Inter

You have a problem connecting and setting up.

Line connection router and setup steps:

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

If you don't have a wireless network set, you need to find the place to set up the wireless network in the router, set the wireless network name and password, and turn on the broadcast.

Generally, there is a problem with the network configuration, which can be fixed by security software, and it can be restored to normal. Here's how:

<>3.After the installation is completed, open 360 Security Guard and click on the function collection.

4.Find the network disconnection first aid kit in Network Optimization and click Open.

5.On the screen that opens, click Comprehensive Diagnostics.

6.Unusual issues are displayed.

7.Click Fix Now and it will be solved.

8.Wait for the repair to complete, click Verify, if you can go online, it means that the repair is complete, if not, click on the strong repair below to fix it.

Reason 1: The router is not set up correctly.

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Turn on the router's wireless function].

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

Cause 2: The computer does not have an IP address and DNS is not set for automatic acquisition.

Set the method of automatic acquisition of computer IP and DNS]:

XP System Setup Method:

Right-click [Click on the neighbor] [Properties] [Right-click the local connection properties] [Double-click the TPC IP protocol] and then click [Automatically get IP address].

Win7 system setting method:

Right-click [Network] Properties [Change Adapter Settings] [Local Connection] [Right-click Local Connection Properties] [Double-click TPC IP Protocol] [Then click "Automatically Get IP Address"], and then click "Automatically Get DNS" Server Address] [Click OK].

To set up the wireless router, first make sure that the connection is correct, the computer is connected to any LAN port of the router, and the broadband cable is connected to the WAN port. Then go and set the Internet access method, wifi name and password.

Here's an example:

3. In the router management interface that appears, enter the login username and password, and click Login.

4. On the left side of the router management interface, in the function menu, click Internet. Choose different connection modes depending on the way you access the Internet. The way to access the Internet is determined by the broadband connection method, and the manual cannot be copied.

Generally, if you are connected to a broadband modem, you usually establish a broadband connection to the Internet on the computer, select PPPOE dial-up, and fill in the broadband username and password below; When the new modem comes with a dial-up, select Dynamic IP.

5. In the wireless settings, set the wireless network name.

6. Set a wireless password. Click "Done" and the router will automatically restart to complete the setup.

Is the IP set up? Once set, restart.

The simple setup method is as follows:

The route should be reset and (in case you're having a problem with your previous settings) restore the original settings by pressing reset at the back, after which you reset it again

1. Plug a wired broadband network cable into the WAN port of the wireless router, and then use a network cable to connect directly to your laptop (or desktop) from the LAN port.

Second, then open the browser, enter generally, or, (see your manual) enter the management and password, generally admin

3. Enter the setup wizard, fill in the past step by step, make a good choice according to your broadband**, if it is adsl, you need to fill in the username and password, if it is a broadband with a fixed IP address or not a fixed IP address, you must fill in the necessary information, all the way through, it is very simple. 】

Fourth, for the security of data and wireless network, you go to the special wireless column to start the key, generally choose the wep method, (wap2 is more secure) fill in the key you want to set on it, pay attention to the number of key digits, see your page prompt, and then select the route restart in the route, not manually power off, and then it's OK, search for the routing signal, enter your preset password everything!

If the computer can't be connected, it is generally considered that your network cable problem and IP address problem, and you can set the IP address to automatically obtain.

Depending on what network you use, there are three types: broadcast number, static, and dynamic; Log in to the router (generally enter in the IE address: open the network settings, use static mode if there is an address assigned to you, and select OPPOE mode for broadcasting.) The setup inside is simple.

How to set it up in the manual of the wireless router, thank you, it's very simple, you can set it up according to the manual.

The computer can't be connected, how do you know that the wireless network can be used.