-
Anonymous users2024-02-11Let's see if you can light it up,The easiest way is whether there will be a "beep" sound when you turn it on, if it's just a "tick" sound, then your hardware self-test is passed, there is no hardware problem, if it sounds a lot, you will plug and unplug the memory again, or check whether the graphics card is loose, if there is no problem above, then you can see if the hard disk has an error, if not, then you can reinstall the system again. If you still have questions, you can write to me or add my QQ.
-
Anonymous users2024-02-10There are many cases of not being able to start, I don't know what is the reason for the brother?
1 The CPU fan is broken and cannot be turned on.
2 The memory module cannot be started if it is not plugged in well or is broken.
3 The power supply cannot be started if it fails.
4 The operating system cannot be started if there is a problem.
5 Graphics card issues also do not show up.
6 Data cable problems are also possible.
7 Motherboard Issues.
-
Anonymous users2024-02-09Failure of the CPU or motherboard.
-
Anonymous users2024-02-08If the boot system does not self-test, or the operating system cannot get up.
-
Anonymous users2024-02-07I don't know what system you use, if you can reinstall the hardware should be no big problem, first see if the mouse and keyboard are connected or connected, and then eliminate them one by one.
-
Anonymous users2024-02-06If you can't reinstall the system, you need to consider the hardware problems.
-
Anonymous users2024-02-05No booting device:
1. Open the side panel of the chassis and check whether the data cables and power cables are secure at both ends of the hard disk.
2. After booting up, connect the del to enter the BIOS, find the main page or whether the circle shows the hard disk, find the first boot device of boot device priority in the boot phase, set the hard disk as the first boot item, save the reboot to solve; If not, it's a hard drive failure.
-
Anonymous users2024-02-04When the computer is turned on, it shows "no device started", but the reasons and solutions are as follows
1. Enter the BIOS to restore the parameters to the factory state, and then save the parameters to restart. If it is normal after restarting, it means that there is an error in the BIOS parameters, it may be that the motherboard battery is almost dead, and the parameters in the BIOS cannot be saved and lost after the computer is shut down, so the BIOS parameters need to be reset if there is an error after booting. In this case, it is recommended to replace the motherboard battery.
2.If you restore the BIOS parameters to the factory settings, and this error still appears when you restart, you need to check whether the hard disk information can be viewed in the BIOS, and you need to check whether the hard disk is damaged. If you can't see the hard disk information in the BIOS, the hard disk may be faulty, it is recommended to replace a hard disk to try, take a hard disk that is confirmed to be a good one to try to see if the BIOS can recognize it, and whether it can boot normally.
3.If there is still such an error prompt when the hard disk is confirmed to be good, it may be that there is a problem with the BIOS module chip, and it is recommended to reflash the BIOS or replace the BIOS chip.
I wish you all a smooth work and a happy mood!
There are several reasons why the car won't start: one. No oil. Two. Power. Three. No air intake. >>>More
Only flash or factory reset.
Step 1: Turn off the phone, hold the phone in your left hand, press and hold the middle of the volume button with your left thumb (press and hold the middle to ensure that you can press the up and down keys of the volume at the same time), confirm that after pressing the volume up and down buttons, press and hold the home (the button in the middle of the lower part of the phone screen) with the thumb of your right hand, and then press and hold the power button with the index finger of your left hand, you will see several rows of blue English options, then move on to the second step. (Hint:.) >>>More
Why does the computer screen go black after booting up, and how to solve it.
Based on the situation of the landlord, the computer does not start at all, you should rule out the software, display, sound, memory module problems, then the only possible problem is the failure of the hard disk; Problems with the power connection socket; The regulator is damaged. It is recommended to drag a repair person outside to check, they have all tools, and the door-to-door fee is roughly ranging from 20 to 50, you can bargain, I wish the landlord a computer as soon as possible.
The solution to the problem that the computer host cannot start: >>>More