What should I do if the XP Firewall fails to start? Urgent, ask for help 10

The firewall is the underlying core setting of the system.

Generally, this problem can only be solved by reinstalling the system, and if it has to be repaired, the cost should be more than 4 figures, and it is necessary to require a software siege division to solve it.

The system you made has the firewall optimized. So there is no firewall.

Method 1. <>

2. Set the startup type to Manual, and stop the following service status to confirm OK.

Method two. 1. Open 360 Security Guard, in the tool, open Repair LSP, and then repair it immediately;

2. The system retains the speed setting, in the run dialog box, enter the text, input noise elimination registration command, set the group policy, select the template management network - QoS packet scheduler, select the selection of the retainer bandwidth after selecting the macro in the right window, and the default setting of the bandwidth limit 20 will not change the bridge type.

We knowXP systemThere is a built-in firewall, which is a network security system that sits between the internal network and the external network. All incoming and outgoing information must pass through a firewall, which acts as a checkpoint for security issues and denies suspicious access. Under normal circumstances, the firewall that comes with the XP system is turned on by default, but sometimes the firewall is closed due to misoperation and other reasons.

BelowNotebook XP system

1. Click the "Start" menu of the XP system and select the "Control Panel" option;

2. Click the "Security Center" link in the "Control Panel" dialog box that opens.

3. In the "Windows Anzhubi Center" dialog box that opens, click the "Windows Firewall" link below;

4. In the "Windows Firewall" dialog box, select the "Enable (Recommended)" radio button and press the "OK" button.

Through the settings of the above steps, you can turn on the built-in firewall of the XP system, for the XP system users who need the firewall, you may wish to follow the above method and steps to set it.

Method 1:

1. Click directly with the mouse There is a start menu on our computer desktop, and you can see the options of the control panel in the column that appears after clicking, and click to open it with the mouse.

2. After clicking to open, the operation window of the control panel will pop up, there are many icons to choose from, at this time, find the security center and click to open, and click on the Windows Firewall option in the selection;

3. After clicking on the firewall, a window will pop up to set the options, and then you will see that there is a function to close, select Close to confirm the closure of the window.

Method 2:

1. Directly see that there is an "online neighbor" icon on the computer desktop, double-click to open it;

2. You can see the option to change the settings of Windows Firewall, and select the turn off option.

1. The driver refers to the interactive interface between the system and the hardware, and the driver-level firewall is a firewall with a very high priority rate, which is higher than the application-level. Generally, it is used by large enterprises and Internet cafes, and individuals only need to use general software firewalls.

Right-click or Ctrl+Alt+Del in the taskbar to display Task Manager

2. In the task manager, click the process to end the process;

3. Or enter Kingsoft's task manager, etc.:

4. The driver firewall can be terminated with Process Explorer. However, at present, the driver firewall upgrade is relatively fast, while the new version of Process Explorer is a little slower.

In the Security Center of the Control Panel, find "Windows Firewall" and double-click it, and click "Off" and "OK" to turn off Windows Firewall.

5. When the system just enters the desktop (that is, before the driver is not started), open the task manager (basically press Ctrl+Alt+del or Ctrl+Shift+ESC to call out) and click on the process after calling, and keep pressing d (don't open any input method at this time), because the startup of the driver must be started after other system processes are loaded, so he is the latest to appear, so he has been pressing d (Note; It's not to keep pressing, not pressing) because the system process is just him is starting with d (the full name of the process is - so pressing d is to quickly find him, once the resource management process appears in the blue process (that is, selected, at this time, to press the key combination alt+e at the fastest speed, and then press the space bar or enter, at this time the drive is turned off.

1. Right-click or Ctrl+Alt+Del in the taskbar, and Task Manager: appears

2. In the task manager, click the process to end the process;

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. After there is a factory reset, it can be used from the new settings (this is under the premise that the physical mountain Luzi connection is correct, sometimes it is caused by the router finding IP address slow or failed, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router**, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult them for advice on the way to the min, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.