What should I do if I want to use the router after reinstalling the computer?

How to set up the router after reinstalling the system on the computer:

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

The computer reinstallation system has nothing to do with the network. You don't need to reset it, you can use it directly.

Go directly to the router settings interface, and the general default is password admin admin

Hello, the computer is automatically connected after the router is adjusted, and the slow opening of the web page may be because others in the same router are also occupying the network, so your network speed is not very ideal. Or maybe someone else is throttling your internet speed with malware.

If you still have questions, please find the nearest easy station from home!

E-station, the digital service store near you!

You can install and set up the router by following the following eight steps:

1. Manually restore the router to factory settings.

Press and hold the reset button in the router for about 10 seconds, and the router will automatically restore the factory reset settings.

2. Connect the router to the computer.

Connect the network port to the computer through the router. There are two network cables, one end of which is used to connect to the mesh hole, and the other end of the network cable is used to connect to the router's bus interface. One end of the other network cable is used to connect to the computer network port, and the other end of the network cable is used to connect to any branch of the router.

<>4. Click "Setup Wizard" on the left column of the page, first create an administrator password by yourself, and then click "OK" to enter the Internet setting interface.

5. After entering the Internet settings, you can choose the Internet mode, we select "Broadband Dial-up Internet", and then enter the broadband and password when handling broadband in the business hall, enter it in turn, and click Next.

6. Enter the wireless settings page, and according to the prompts on the page, reset the wireless name and wireless password of the router, as shown in the figure below.

7. The following result appears, indicating that the router is set up.

8. Check whether it is successful.

In your browser, enter your router's settings again** to open your router's settings page.

Then find the option of "Internet Access" or "WAN Port Settings", and you can check whether the router settings are successful.

First of all, it is necessary to ensure that the computer is running normally, the network is smooth, and the router is functioning normally.

Steps to connect to the network with a router after reinstalling the system on a win7 computer.

After reinstalling the system, install the NIC driver on the system, and then set up the router as follows.

a.One end of the network cable is connected to the LAN port of the router, and the other end is connected to the network port of the computer;

b.Open a browser, enter the IP address of the router, and enter the router account and password.

c.Wireless Status: On;

d.After the setup is complete, one end of the network cable is connected to the LAN port of the modem, and the other end is connected to the WAN port of the wireless router.

2.After the router is set up, if it is connected to a wireless network, then click the network icon in the lower right corner of the computer, select the SSID wireless device, and click to connect.

If the connection is to a local connection, then connect one network cable to the LAN port of the router and the other end to the network port of the computer.

After the router is reset, the computer cannot access the Internet, and the router must be reset to access the Internet.

Here's how to set up the connection after the router is reset:

1. The broadband bus (the network cable from the cat) connects to the WAN port of the router.

2. Connect one end of the network cable to any LAN port of the router, and connect the other end to the computer, and start the computer and router equipment;

3. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface.

4. A trace of the account and password for logging in to the router appears in the setting interface, and the default account and password admin are entered

5. Set up step by step according to the setup wizard, choose the way to access the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers, choose the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

6. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

7. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed off the network.

8. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.