Do you want to cut the card of Huawei P10, and how to put the card in the card slot of Huawei P10?

Huawei P10 needs to cut the card. Huawei P10 does not use a micro SIM card, it uses a nano SIM card, dual SIM.

The instructions for inserting a HUAWEI P10 mobile phone card are as follows:

1. Take the card tray.

In the power-off state, find the card tray at the top left of the phone, and use the card pick-up needle that came with the phone to remove the card tray.

Insert the needle into the small hole on the edge of the card tray vertically, and press hard to make the card tray pop out.

Second, look at Cato.

There is a text prompt on the card tray for the type of card: the inner card (also called card slot 1) only supports nano-SIM cards, and the external card (also called card slot 2) can put nano-SIM cards or microSD cards.

3. Insert the card.

Place the nano-SIM card and microSD card into the tray in the direction indicated, noting the direction of the notch.

4. Insert the card tray back.

The phone screen is down, and the card tray is pushed back into the card holder. You can gently press down on the nano-SIM card or microSD card to prevent the card from being slightly pushed up by the shrapnel that comes into contact during card insertion.

Please turn off the mobile phone first, and then find the free card pin from the mobile phone box, and gently insert the small round hole on the side of the mobile phone with the tip of the needle, and the card tray will pop out, and you can put the mobile phone card into the card slot.

First of all, what about your love phone, it is a double card tray in one design, and the card tray is on the top left side of the phone. You can insert 2 Nano SIM cards, or 1 Nano SIM card and 1 MicroSD card at the same time.

P10 Newbie Card.

1. Take the card tray.

In the shutdown state, find the card slot at the top of the left side of the phone, insert the card pick-up pin vertically into the small hole on the side of the card tray, and press hard to make the card tray pop out.

P10 Newbie Card.

Second, look at Cato.

Note: P10 only supports nano-SIM cards, neither standard SIM cards nor micro-SIM cards are supported

P10 Newbie Card.

3. Insert the card. Place the nano-SIM card and microSD card into the tray in the direction indicated, noting the direction of the notch.

The loaded tray is flat, and when viewed from the side, the tray and card are on the same plane.

Note: Card slot 2 can only insert 1 card at a time

The phone can be inserted with 2 nano-SIM cards at the same time, or 1 nano-SIM card and 1 microSD card at the same time.

P10 Newbie Card.

4. Insert the card tray back.

The phone screen pushes the card tray flat back into the card holder.

You can gently press down on the nano-SIM card or microSD card to prevent the card from being slightly pushed up by the shrapnel that comes into contact during card insertion.

Note: As a reminder, you cannot insert a nano-SIM card, microSD card directly into the card holder where the card tray is placed, or use a non-standard nano-SIM card that is cut small. Not even the card that the business hall helped to cut.

Damage to your phone caused by these reasons cannot be repaired for free.

Finally, press and hold the power button to power on, and you can use the P10!

P10 Newbie Card.

5. Dual-SIM management.

When you use dual SIM, only one card slot can support 4G networks. You can specify the 4G card slot according to the network conditions for a better experience. In order to use the SIM card more reasonably**, you can also set the default card used when surfing the Internet and playing **.

Open [Settings] > click [Dual SIM Management], and set the two SIM cards separately according to your actual needs. Click Default Dial Card to set two SIM cards or only one default SIM card to be displayed when dialing**.

Note: This feature varies by network operator, please refer to the actual feature.

If you disable the SIM card, you won't be able to make calls, send text messages, or surf the Internet.