The problem of iPhone recovery experts come in!!

I just bought maybe the boss can help you brush for free, I don't understand, at least I have to study for ten days and eight days to do it, I am saying that even if the flashing machine costs money, it will cost dozens of yuan, why bother to do it so hard, in case it breaks, there is no repair! A few days ago, my own one also gave me a factory restore after the crash, and then restored it with iTunes, and then it was the same as you Only hit **, I studied it for a day, and I got it to death After that, I took it to the outside people to brush, and now it's done!

To downgrade, you must first downgrade iTunes to.

See the specific downgrade method.

After upgrading, please crack and jailbreak again.

Your ihpone and mine have had your problem with the ihpone running software that only works abroad (3gs).

You'd better go to the Apple store and brush it up, and the boss you bought it in ** will give you a free brush Otherwise, it will cost more than 500! Remember! Don't upgrade your phone to run software.

A suggestion for you, don't use iTunes software to manipulate Apple, use 91 Mobile Assistant!

I know that I can play ** because you have not jailbroken after upgrading the system, and only after jailbreaking can you install cracked games and software or something.

Here's how to get your iPhone into recovery mode:

1. First press the sound buried bend +, then press the volume -, and press and hold the side button, as shown in the figure below.

2. Next, after the shutdown interface appears, keep pressing the side button.

3. Next, wait for the screen to go black and keep pressing the side button.

4. You can release the side button when iTunes appears, as shown in the car costume below.

5. To exit the recovery mode, you should press the volume + first, press the volume -, and then press the side button for a long bend of the sail.

6. When the logo appears, you can directly release the side button, as shown in the figure below.

Summary. Connect the data cable of AISI Assistant on the next and lower computer, and then select the installation package to flash again.

Recovery ModeiPhone Half Restore That's it!

Kiss me and provide me with a screenshot.

The first thing to consider is that your hardware is the cause of the inability to recover.

If it's not hardware, it may be a problem with the installation package under you, and it is recommended to re-flash the Aisi assistant.

How to do it. Connect the data cable of AISI Assistant on the next and lower computer, and then select the installation package to flash again.

Is there a step-by-step operation chart?

This is very simple, you go directly to the computer to get an AISI assistant software, and then use a data cable to connect the mobile phone and the computer together, the AISI assistant on the computer, you click on the one-click to flash the phone.

How do you still show that**.

That's the hardware problem.

What to do. Take it to the after-sales market to test that it should be loose or the hard disk is soldered.

I've solved this problem, I hope it helps!

Point recovery, but recovery fails!! Don't look at the ones that are directly restored successfully!

Solution: 1) Connect your iPhone to your computer to iTunes and turn it on, confirm that the device is in recovery mode. (If the recovery screen does not appear, click "Your iPhone" and then click "Summary" on the upper right).

2) Click "Recover" and wait for the error dialog box to appear.

3) When prompted, tap OK.

4) When your iPhone is connected to your computer, quit and restart iTunes. (It's not about restarting your computer [don't unplug your iPhone] This is especially important.) I mostly spend time stuck on this issue.

I always thought it was a failure, so let's start over! I unplugged my iPhone from the computer, restarted the computer, and started again, which caused me to repeat many times and could not successfully upgrade! ）

5) Now the system should re-recognize the iPhone in recovery mode.

6) Try the recovery again to start the normal recovery operation. It's going to take a little longer.

OK, back to normal for the second time!

What is the status of the landlord's phone now?

Is it in recovery mode?

I saw that there was a prompt for the landlord to modify the hosts, reminding the landlord not to modify the hosts easily, even if you want to try, you must prepare the original hosts first.

I have tried to modify the hosts method, but it was not good for me at the time, the situation is different, and the method of fixing it may be different.

If it is now in recovery mode, it is recommended that the landlord turn off the small umbrella, restart the computer, and then restore the firmware to try.

Press the power button + home button at the same time After the phone screen goes black, release the home button Press the power button there, and then when the white apple appears, count silently for two seconds, and then don't release the power button At the same time, press and hold the home button with another finger When the white apple disappears, you release the hand that pressed the power button and don't let go of the home button, and then the iPhone will enter DFU mode Then you can flash the iTunes Flash the phone to clear the iPhone infinite recovery mode.

When the phone enters recovery mode, you can directly flash the phone to solve it, connect iTunes, and click to recover. But**What's missing,In addition,You can connect PP assistant,itools and other tools,Use the tool inside to kick out the recovery mode,See if you can kick out。

This is caused by the conflict of the plug-in.,I've also encountered it.,It's actually easy to solve.,Just keep holding down the power button + home button (about 10 seconds),And then it's OK.,You can delete the latest plug-in when you get there (the one in Cydia),I hope my answer will help you all.。

The power button + home button is actually equivalent to forcibly pulling out the battery, which is built-in to the system, just like the one-click restore of the computer. No problem.

1.Make sure your iPhone has enough battery first, usually at least 50% or more.

2.Then, in the state of iPhone powering up (no need to enter the desktop), first press and hold the home button, then press and hold the power button, until the screen goes out and about 4 seconds later, release the power button, but continue to press and hold the home button, hold for 15 seconds, and the device will enter the DFU mode with a black screen.

3.After entering DFU mode, connect the latest version of iTunes on your computer and click Restore iPhone.

Note, if the battery is low, charge it first.

Depending on your description, there may be several questions:

3.Temporarily turn off the firewall, or anti-virus software.

4.Firmware upgrades can also be performed using some helper software.

The right way to restore your phone.

1.Open iTunes and click on the summary, it will show a check for update on the right.

3.**After the firmware is good, directly click the restore iPhone button in the iTunes software, press and hold the shift key when clicking, and then click the restore iPhone button, a prompt will pop up, you need to turn off the Find My iPhone in iCloud on your phone

This is in the phone settings, tap on the phone's iCloud settings, and then turn off Find My iPhone.

Then go back to iTunes, and then press the shift key to restore iPhone, and the window of selecting firmware will pop up, here select the previous good firmware, and then click the open button, and then wait for iTunes to restore the phone.

Hope it helps!

Forced shutdown··· Press and hold the menu button and the power on button... 6 seconds...

Just turn it on again...

Press and hold the power button and the home button at the same time.

I don't understand.

Then you call the customer service and ask, they are still very professional!