Consult a professional expert on how to cook headphones

Updated on educate 2024-05-02
7 answers
  1. Anonymous users2024-02-08

    "Burn-in" means that the sound quality needs to be stabilized after a period of use. If you listen to it for 1 hour a day, it will take about a few months for the sound to basically stabilize. Then this month is the "burn-in" period.

    Proper burn-in will not damage the headphones, but will only accelerate the stabilization of sound quality. The word "stable" is used here, not "improved", and some headphones (speakers) don't necessarily boil better than brand new. For earphones, you can use the following cooking method:

    1. Use pink noise or white noise as the signal source.

    2. Cook continuously at normal volume for 24 hours at the initial stage.

    3. Stop for 4 hours.

    4. Use a high volume (the ears are just unbearable) 8 12 hours.

    5. Stop for 4 hours.

    6. Cook at normal volume for 24 hours.

    7. Repeat as above, and the earphones will be "cooked" after about a week.

    When burning the machine, pay attention to it, if you are not sure whether the volume is too loud, find someone to help you listen, if you can't hold on the headphones for 10 seconds (non-preference reasons), then the volume is too loud.

  2. Anonymous users2024-02-07

    ...Maintenance. It's not burning. Sweat.

    1.Sennheiser two-year warranty does not include diaphragm" so low volume appreciation. Ear protector (important) 2Don't fall.

    3.Don't get wet

    4.Do not blow into the vocal unit (important).

    5.Upper ear cotton. Don't get into the dust.

    6.Do not put it on a computer and try it out with software. Frequencies below 150Hz will cause the earbuds to explode instantly.

  3. Anonymous users2024-02-06

    There are many posts about cooking headphones, but the essence of it is to accelerate the aging process of headphones. In this process, the headphones are able to get into the groove as early as possible to achieve their best sound quality. Its principle and the run-in of the new car, the pre-race warm-up is a reason.

    There are many ways to cook headphones on the Internet, from those with various volumes to fixed audio. But in fact, for enthusiasts, the easiest and most correct way is to use it normally. Just as no one deliberately drives around to speed up the break-in period of the car, the most correct way to cook headphones is to use them normally.

    Specifically, just pay attention to the following points:

    1. The speed of the new car during the run-in period should not be too fast, and the same is true for the headphones. For the first dozen hours of headphones, the sound is quieter, 1 2 is fine. After more than a dozen hours, most headphones enter a stable state (and the high-end ones are longer), and the sound can gradually return to normal, and this recovery process can come back for more than a dozen to dozens of hours.

    2.The continuous sound should not be too long, more than ten hours is not continuous, but cumulative; New earphones should be rested, preferably for no more than 2 hours in a row.

    3.Avoid harsh high frequencies and fast-paced heavy low frequencies with rich high and low bass with rich high and low bass (you don't buy headphones to listen to noise).

    4.Don't deliberately, cooking headphones is a gradually changing feeling, there is no need to cook for the sake of cooking, or that sentence, the normal use of gentle is the best.

  4. Anonymous users2024-02-05

    Value headphones introduce you to the method of headphone cooker:

    1.Drive the headphones with 1-3 at normal listening volume for 24 hours (100-10000Hz);

    2.Drive the headphones with normal listening volume 2 3 for 24 hours (50-15000Hz);

    3.Drive the headphones with normal listening volume for 72 hours (20-20000Hz);

    4.Drive the headphones with normal listening volume 4 3 for 24 hours (20-20000Hz);

    5.Listen to the song at a normal listening volume.

    A few notes: 1).For new headphones, don't just turn on the full power for a few days and nights, you should take your time;

    2).A certain amount of listening time should be reached every week, or after a long period of non-use, the machine should be re-burned.

  5. Anonymous users2024-02-04

    Don't boil the headphones casually, it's easy to break, and the headphones have a lifespan, do you waste your life soon after cooking the headphones, just listen to it comfortably, if you want to cook, you can listen to it more every day, don't deliberately put it ** no matter what...

  6. Anonymous users2024-02-03

    Cooking headphones is to treat the aging of headphones There is no need and I don't understand it It's easy to burn it or listen slowly Don't turn on the sound too much It's a long time to feel the change in the sound of the headphones How interesting.

  7. Anonymous users2024-02-02

    It's not professional, you don't have to deliberately cook headphones.

Related questions
9 answers2024-05-02

No, you cannot. The network card driver is to drive the hardware of the network card to work normally, without the network card driver, the network card can not work normally, so you must install the driver for the network card normally, and then you can connect to the network in the next step. >>>More

9 answers2024-05-02

Burn-in: 1Keep in mind that the method of cooking headphones is "gradual", at first use a softer**, let the headphones soothe for 10-30 hours at a lower volume, and then use the ordinary** (except rock and dance music) to cook for 100-200 hours at medium volume; If you listen to the treble at this time, it is not harsh, it becomes mellow and natural, the midrange is warm and friendly, and the low frequency is no longer a rumbling in a mixed group, but full of details, then congratulations, OK, you must not rush to quick success. >>>More

10 answers2024-05-02

1.Upstairs is pure nonsense. The headphones of Magic Sound are at least about 1000. >>>More

12 answers2024-05-02

It depends on your needs Smart phone 6120c king **Naturally, it is Suo Ai ......The main thing is what you need.

2 answers2024-05-02

The sound system of the dynamic earphone is driven by the voice coil to drive the diaphragm, and the diaphragm is fixed on the frame of the earphone, theoretically speaking, the diaphragm movement should be a piston (vertical) movement, which requires the edge of the diaphragm to have greater compliance, the pot is the pot here, the edge of the diaphragm of the new earphone is relatively tight, the elasticity is large and the compliance is small, the earphone is to let its edge move, the sound is not so tight. >>>More