Headphone amp problem, will the headphone amp push the headphones

Updated on number 2024-05-23
10 answers
  1. Anonymous users2024-02-11

    First of all, I like to listen to the words of female pop.

    K701 is more suitable.

    HD598 600 and the like are good for classical, but not very well suited to popular renditions.

    The Tianlong D2000 Audio-Technica ESW9 at the same price can also be considered After all, you listen to the female pop.

    The purpose of the existence of the headphone amplifier is to provide more sufficient driving force, how much the potential strength of the headphones can be played, and the headphone amplifier has a great relationship with the headphone amplifier Generally speaking, headphones of this price range have the need to have an independent headphone amplifier Earphone amplifier is strictly an indispensable part of a complete listening system.

    High-impedance headphones like the HD650 are even more necessary to have an amp on them, and without the support of the headphone amp, they should not be considered at all.

    Large headphones like the D2000 don't have the high requirements of the HD650, the lower impedance, and the higher sensitivity make it perform well on some portable devices, but a headphone amplifier can still help it exert its remaining strength.

    The decoder is responsible for converting the digital signal output from the audio source into an analog signal, while the headphone amplifier is responsible for amplifying this part of the analog signal to the headphones.

    The computer is the sound source, and of course it is better to have a separate sound card. A good sound card as a turntable + a good DAC + a suitable headphone amplifier + an excellent headphone, these interlocking links, each ring has a unique impact on the sound quality.

  2. Anonymous users2024-02-10

    This is popular among girls, and the best is of course K701, and there is no one.

    If the computer is the audio source, the most critical one, I think, is the decoder (which is very important for PC-HIFI), followed by the headphone amplifier. In fact, Anrun's manager Xiaobaibai has done experiments, comparing MDAC2+SOLO headphone amp and MDAC5, there is not much difference, but you also know that SOLO headphone amp is still relatively expensive.

    MDAC5 decoder or the recently popular WDAC24 decoder,If you cook well,You can push K701 out of seven or eighty,These decoders come with the function of earphone amplifier,**Around 3000,MDAC5 is a little more expensive,It can be said that you are more cost-effective within your budget,

  3. Anonymous users2024-02-09

    This depends on the maximum continuous power of the headphones, especially the small headphones used for desktop headphones must control the volume, and they must be turned off in time when not in use.

  4. Anonymous users2024-02-08

    The headphone amplifier is the power amplifier of the headphones, and the headphone amplifier will push the headphones, and the following situations will cause the headphones to be broken:

    When the output power of the headphone amplifier is greater than the power that the headphones can bear, it is easy to burn out the headphones.

    Therefore, when choosing a headphone amplifier, pay attention to the output power of the headphone amplifier. Do not exceed the power of the headphones too much.

  5. Anonymous users2024-02-07

    Looking at the headphone amp power and headphone parameters, generally desktop headphones are mainly used for large headphones, and if you push the earbuds hard, there will definitely be problems. Portable ear amps are mostly used to push earbuds, which is not a big problem.

  6. Anonymous users2024-02-06

    Third-party accountant's phone bill.

  7. Anonymous users2024-02-05

    Recommend Senyun PX-1, it's very good.

  8. Anonymous users2024-02-04

    It's best not to match it like this, the headphones are the terminal equipment, the headphone amp is the output, and the mid-range headphone amp is output to the high-end headphones, at best, it is just to reach the limit of the headphone amp, but the headphones are not fully played.

  9. Anonymous users2024-02-03

    K701+ small hedgehog headphone amp.

    HD650+** fax.

    All are under 10,000.

  10. Anonymous users2024-02-02

    Amplifier: Beyerdynamic A1

    Headset: Beyerdynamic DT990

    **8000 is less than a point.

Related questions
12 answers2024-05-23

No, it's to avoid the interaction between the two channels. There is nothing wrong with two op amps working at different voltages, but it is not recommended to do this, because the front and rear voltages are different, so it is troublesome to have two sets of different voltages. The NE5534N single op amp can replace the NE5532N, and the performance is better. >>>More

9 answers2024-05-23

The distinction between the high and low of the amp basically depends on three parts. First of all, we have to talk about the tuning of the sound, then look at the components used, and finally look at the manufacturing process. The sound made by the same components is not the same, it depends on the designer's concept and the pursuit of restoring the real sound, so there are tens of thousands or even hundreds of thousands of high-end headphone amplifiers, but there are also cheap thousands of good headphone amplifiers that are recognized by everyone, of course, it depends on what kind of headphones you want to push, if the headphones you use are a few pieces of dozens of dollars, there is no need to use the earphone amplifier, because really good headphones are not very cheap, at least hundreds to thousands of dollars or even tens of thousands. >>>More

2 answers2024-05-23

Hello, it's a headphone amplifier that uses tube amplification. >>>More

4 answers2024-05-23

The air in the conch cavity is an elastomer like a spring, and when the external sound wave is transmitted to the cavity, it is transmitted from the cavity to the bottom of the cavity, and then from the bottom of the cavity to the cavity mouth. If the frequency of the sound wave is equal to the natural frequency of the air in the cavity, then the air in the cavity resonates with the sound wave and produces a louder sound. The inside of the shell is curved and filled with air, so when you are in a noisy place, these noisy sounds make the air in the shell vibrate, so if you put the conch in your ear, you will hear the sound of the tide. >>>More

9 answers2024-05-23

There is not much difference between the two headphones. In the Bluetooth headset, I personally feel that the Shell Prince-Mo is very good, this headset is active noise cancellation, touch to turn on the noise cancellation mode, the surrounding noise is almost inaudible, very quiet feeling. The noise reduction effect is also noticeable, and I can listen to music quietly when I am in the car and walking on the side of the road. >>>More