How to open the engine cover of the Range Rover Executive

There is a handle on the lower left side of the meter, pull the handle with your hand, and then you can open the front cover.

When the bonnet is opened, it is generally flipped backwards, and to a lesser extent, it is flipped forward.

The engine cover, which is flipped backwards, should not be in contact with the front windshield, should have a minimum spacing of about 10 mm, open to a predetermined angle. In order to prevent the driving due to vibration to open by itself, the front end of the engine cover should have a safety lock hook locking device, and the lock device switch is arranged under the cabin instrument panel, and the engine cover should also be locked when the door is locked.

Removal of the engine cover: open the engine cover and cover the body with a soft cloth to prevent damage to the topcoat; Remove the windshield washer nozzle and hose from the engine cover; Mark the hinges on the engine cover for later installation; Remove the fixing bolts of the engine cover with the hinges and should prevent the engine cover from slipping off after the bolts are removed.

Installation and adjustment of the engine cover: The installation of the engine cover should be carried out in reverse order of disassembly. Before tightening the fixing bolts between the engine cover and the hinge, adjust the engine cover to the front and back, left and right, or adjust it up and down with the help of hinge gaskets and cushioning rubber to make the gap fit evenly.

Adjustment of the engine cover lock control mechanism: before the engine cover lock is adjusted, the engine cover must be corrected properly, and then the fixing bolt is loosened, and the lock head is moved back and forth, left and right, so that it is aligned with the lock seat, and the front of the engine cover can also be adjusted by the height of the lock dove tail bolt.

Pull the lower left handle with your hand, and then it's ready to open.

Pull that handle under the gauge, and the front cover has to open.

Individuals, individuals, anyone, are instead qualified and people.

Land Rover Range Rover front cover opening method:

1. Unlock the engine compartment. The engine compartment lock wrench can be seen in the lower left of the main cockpit, and the engine compartment is unlocked by pulling the wrench.

2. Pull the wrench in front of the engine cover to open the engine compartment cover.

3. Use hydraulic rods to support the engine compartment.

4. The engine cover of the Range Rover can be opened, and the engine compartment layout can be seen.

Hello 1, first of all, open the door, sit in the driver's seat, and then look for the engine switch handle on the left side of the driver's seat. Pull the car's engine handle with your hand and you can hear a pop sound.

2. Check whether the hood of the car engine has been opened, if there is already an obvious gap, it means that the hood of the car engine has been opened. Reach into the front of the bonnet** and reach the bonnet auxiliary hook handle, lift and hold the paddles up while the bonnet is lifted up.

3. Hold up the support bar.

Range Rover Front Hood Opening Steps:

1. In the lower left corner of the steering wheel, that is, at the driver's knee, find a handle and pull it.

2. Then go to the front of the car, find the car mark, and slowly touch a button from the bottom to the top with your hand (this is to control the second lock, you just opened the first lock) and lift it up.

3. Lift it up and the lid will open. The Range Rover's engine compartment layout can be seen.

1. First of all, the engine compartment lock wrench can be found in the lower left of the main cockpit, and the engine compartment can be unlocked by pulling the wrench.

2. After that, pull the wrench in front of the engine cover to lift the engine compartment cover.

3. After that, use the hydraulic rod to prop up the engine compartment.

4. After that, you can lift the engine compartment cover and you can see the engine compartment layout.

Summary. How to open the front hood of the Land Rover: The switch is under the dashboard, on the left side in front of the driver's seat, and the hood is opened:

1. Open the driver's side door; 2. Pull back the hood opening wrench located under the instrument panel; 3. At this time, a gap will open in the front hood; 4. Lift the front hood up with your hands; 5. Use the hood support rod to firmly support the hood.

How to open the front hood of a Land Rover.

How to open the front cover of Land Rover: the switch is under the dashboard, the left side in front of the driver's seat, and the way to open the hood: 1. Open the driver's side door; 2. Pull back the hood opening wrench located under the instrument panel; 3. At this time, a gap will open in the front hood; 4. Lift the front hood up with your hands; 5. Use the hood support rod to firmly support the hood.

The hood switch is in the lower left corner of the steering wheel, which is where the driver's knee is, find a handle and pull it. Walk to the front of the car, find the car mark, and slowly touch a button from the bottom to the top with your hand (this is to control the second lock, and it is the first lock that was opened just now) to lift it up. Lift it up and the lid will open.

The Range Rover's engine compartment layout can be seen.

Find the engine compartment unlock wrench located at the bottom left of the main driver's seat, and pull the wrench crack to unlock the engine compartment. Put your hand into the front end of the engine compartment cover, touch the auxiliary hook handle of the engine compartment cover, lift the paddles up and hold, and at the same time lift the engine compartment cover up and support the support rod.

When the bonnet is opened, it is generally flipped backwards, and to a lesser extent, it is flipped forward. The engine cover, which is flipped backwards, opens to a predetermined angle and should not be in contact with the front windshield, and should have a minimum spacing of about 10 mm. In order to prevent the driving due to vibration to open by itself, the front end of the engine cover should have a safety lock hook locking device, and the lock device switch is arranged under the dashboard in the car.

When the door is locked, the engine cover should also be locked.

When disassembling the engine cover, pay attention to opening the engine cover and cover the body with a soft cloth to prevent damage to the topcoat; Remove the windshield washer nozzle and hose from the engine cover and mark the hinge position on the engine cover for easy installation. Remove the fixing bolts of the engine cover and hinges of the engine cover of the engine source, and prevent the engine cover from slipping off after the bolts are removed. (Photo by photo:.)

Wu Binbin) M5 Trumpchi GS8 AION v Macchiato DHT PHEV Latte DHT Hiphi X @2019