Xiaomi Note can t connect to wifi

Updated on technology 2024-05-01
4 answers
  1. Anonymous users2024-02-08

    It could be a firmware issue! It is recommended to try the development version of the line brush.

  2. Anonymous users2024-02-07

    1. If the opportunity allows; Restart the wireless router; See if you can solve the problem.

    2. In Make sure your phone is within the wireless network coverage range, click "Scan" to refresh the wireless network list.

    3. Connect the computer to the router through the network cable and log in to the management interface of the router.

    4. In Wireless Settings - Basic Settings, the channel is between 1 and 11, the wireless function is turned on, and the router is restarted.

    1. The unsuccessful wireless connection may be caused by incorrect settings of wireless password and other parameters. A new key entry attempt.

    2. Please make sure that the wireless router does not have the wireless MAC address filtering function enabled; Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function Wireless Settings - Wireless MAC address filtering, turn off the wireless MAC address filtering function.

    Three: What should I do if the wireless connection is successful and I can't open the web page?

    First of all, check whether the router is connected to the external network, log in to the router management interface, and look at the running status - WAN port status, if it is 0, please follow the router quick setup guide to set it again.

    2. If the computer can access the Internet, the mobile phone cannot; Check whether the SSID number of the wireless router is in Chinese; If it is changed to letters and numbers; Mobile phones sometimes can't effectively recognize Chinese:

    3. If the above cannot be solved: we set a static IP for the mobile phone

    4. The wireless router supports between 15-20 wireless devices; When the maximum number of connected wireless devices is exceeded, even though you are connected to Wi-Fi; But you're wireless; At this time, you can unplug the wireless router; Turn on the wireless router after 10 minutes.

  3. Anonymous users2024-02-06

    Hello Kiss is happy to answer this question for you. The reasons why Xiaomi's fiber mobile phone is connected to wifi but cannot access the Internet are: 1. The WiFi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

    2. Router problems, the router may be overheated or damaged. 3. Possible broadband arrears, resulting in inability to access the Internet The solutions are as follows: 1. Restart the router, reconnect the wifi for online review 2. If the router is faulty, replace a router and try again 3. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet, reset the settings 4. If the mobile phone system problem is caused, update the system and restart the mobile phone to connect to the Internet.

  4. Anonymous users2024-02-05

    You can try to turn the device off and on again, or you can choose to switch networks and reconnect again, specifically there are the following solutions.

    1. Check if the phone has turned on the sleep mode to save power, and if so, turn off the sleep mode first.

    2. If the phone is not sleeping, but it still can't access the Internet, try to re-enter the wifi password, if it doesn't work, try again.

    3. If you still can't connect according to the previous operations, you can basically judge that the router is faulty, and it is recommended to restart the router to try. If the fault persists, we recommend that you log in to the router and try to reset the routing DHCP service. Detailed DHCP service settings can be found online.

    4. To see if other people's mobile phones and computers can use this network, it is recommended to disconnect this device and relink it to see if it can be used normally.

    5. If it is a corporate network, it is recommended to contact the company's network management to troubleshoot or assign a static IP to solve the problem. Because if the company's network is set up, even if you know the password to connect to it, you will not be able to access the Internet. If you still connect it yourself, it may take a lot of time, so it is better to go directly to a mechanic to repair it.

    6. If you reflect that other wifi on your mobile phone can be connected, but only a specific router cannot be connected (it is caused by router settings, as long as other routers can be connected, it proves that there is no problem with the wifi module of Xiaomi mobile phone, please verify your router settings or change the wifi environment to try.) )

    In addition, there are many reasons why you can't connect, such as the company router limits the number of people who can access it, or restricts access to the router's MAC address, naturally others can get on, Xiaomi can't, this is just one of the reasons.

Related questions
8 answers2024-05-01

Solution: Steps:

store can be put first if it can't be opened after many attempts. >>>More

12 answers2024-05-01

Hi! Hi, you can follow the methods below to set up your phone:1 >>>More

11 answers2024-05-01

1. Check whether it is the wifi problem of the mobile phone. The method is to set up the mobile phone - WLAN - point needs to be connected to the network - point forgot password. Click on this network again - enter the correct password and try again (check the "Show password" option when entering the password, you can see the password you entered); If the signal is too weak (less than 2 bars), it cannot be connected. >>>More

16 answers2024-05-01

Trick 1: Turn off and restart the Wi-Fi connection.

If you use your phone to surf the Internet, the phone will keep a network IP address assigned by the Wi-Fi connection, it will be applied to the current Wi-Fi, if there is no address conflict, you don't have to worry, if there is a conflict, you have to close and restart the Wi-Fi connection. Here's how: >>>More

13 answers2024-05-01

Hi! Open "Settings" in your Xiaomi Mi 3 to enter the "All Settings" interface. 2. When you see the "About Phone" option, click to enter, and then you will see the Android version of the option. >>>More