If the CPU pins are crooked, will it affect me? HIGH SCORE!! ）

In general, there is no effect. As long as the needle keeps going, it's normal. If he breaks your CPU, he will compensate you in full for the loss, which is a problem with the accident rate on the repair computer.

The pins are phosphor copper, which is extremely tough and brittle, and in this case, insert an infusion needle into the pin, heat the needle with a soldering iron and apply force slowly, and it will not break.

A little more talking.

There will be no impact.

Beta in Kyushu 10,25 yuan.

It's good to straighten it, it doesn't matter. It is enough to buy a 15 yuan aluminum heatsink fan for the fan, and you don't overclock.

It won't affect your normal use, as long as it is straightened, press the socket normally and plug it in.

As long as the stitch is not broken, there is no problem, you can find a tweezer and be careful to straighten him up!

Pay attention to this situation in the future!!

It's been done well, it's generally no problem,Now there are few problems with CPUs above dual cores.,Use it with confidence.,There are many options for fans.,It's just that the original 4200+ is not easy to use.,Buy 20 yuan - 40 yuan is OK.,It's a bit of a waste if it's higher.。

It will not affect your normal use, which is actually very simple, it is equivalent to you taking a wire and connecting a bulb, as long as your wire is continuous, it will not affect the normal operation of your bulb. The principle is simple!

If the CPU pins are bent, it will not affect if you adjust them with a tool. The boot self-test also passes, and the CPU problem is not caused by the needle.

The motherboard is placed on the table, the CPU and memory are also exposed to the desktop, and the rotation of the CPU fan will also bring about the shaking of the motherboard, so it should be fixed, if it is an external graphics card, sound card, and network card, it is also easy to absorb ash because it is placed outside, so it is necessary to do a good job of cleaning.

In a word: more dust, less movement, anti-bumping.

Note: Paper can also produce electrostatic attacks, and the best way is to put an anti-static bubble bag.

Research hardware until the computer is damaged in the end, if you can learn something, it's worth it, and if you can't learn it, it's not worth it.

Summary. What problems will occur if the CPU base pins on the computer motherboard are crooked, if the CPU pins on the motherboard are crooked, the computer will not be able to use normally, after all, if the pins are crooked, it will not be able to power on, and the CPU and the motherboard will not be connected and cannot be used. But if it's crooked, it might even light up.

It's just that there may be problems when running, such as memory sticks, which may not be available. Or frequent blurred screens, etc.

What problems will occur if the pins of the CPU base of the computer motherboard are crooked.

What problems will occur if the CPU base pins on the computer motherboard are crooked, if the CPU pins on the motherboard are crooked, the computer will not be able to use normally, after all, if the pins are crooked, it will not be able to power on, and the CPU and the motherboard will not be connected and cannot be used. But if it's crooked, it might even light up. It's just that there may be problems when running, such as memory sticks, which may not be available.

Or frequent blurred screens, etc.

Will it cause the computer to boot up and restart indefinitely and not enter the system?

Yes. He only bent two or three of them.

It's still not very good, it's easy to blue screen.

Mine is to turn on the fan, and before it enters the system, it reboots, and repeats.

First of all, when the CPU is twisted or bent, try to protect the CPU to avoid similar situations from happening again. Secondly, we need to find a very flat place, such as a desk , so that it will help the recovery of the CPU to work.

Next, we need such an artifact, which is the injection needle, which polishes and smooths the tip of the injection needle. Then, use the pinhole of the injection needle to insert the CPU pin that needs to be straightened, and straighten the pin. Finally, you need to pay attention to the strength should be light, and try to follow the trend so as not to cause the pins to break.

If the CPU pins on the motherboard are crooked, the computer will not be able to use normally, after all, if the pins are crooked, it will not be able to power on, and the CPU and the motherboard will not be connected and cannot be used.

It is not recommended to use it when a bunch of feet are crooked. But you can straighten it slowly, remember to be careful, if you force it down, it won't work, be sure to straighten it, be careful, don't break it.

Generally, it cannot be used normally, but in some cases it can be used, but most of them are not normal.

If the jumper or pin on the motherboard is bent, use tweezers to straighten it.

If the pins of the CPU base on the motherboard are bent, then you have to be careful.

If the degree of crookedness is not large, it can be touched normally. The computer is still functional. The inability to use is actually caused by poor pin contact or misalignment, and crookedness is just an appearance phenomenon.

The computer is also not able to use normally, after all, if the pins are crooked, it will not be able to turn on the power, and the CPU and motherboard will not be connected and cannot be used.

If you can contact this kind of thing, let's see if you can contact it, even if it's crooked, it's fine, if you can't touch it, then it definitely can't be used.

It's hard to say, it depends on which pin has a big impact, it may not be able to turn on the boot, there may be no impact, and there may be a lack of function.