Our home satellite dish is 3S and now it is not a replacement for the star 6B, I want to know its ma

Change the azimuth, polarization, and elevation angles of the antenna. And set the new parameters to use!

If not, check it out!

Can't find what I can offer you.

First of all, take a look at the parameters of each channel of Asia 3S from the Internet, and then add the program.

After adding, select any channel, check the signal quality, and then rotate the antenna in the direction of Asia 3s to achieve satisfactory signal quality.

Other channels are also available.

I helped my neighbor connect a TV with three satellites.

Turn west about five degrees. After the parameter 4000 h 26850 has a signal, adjust it carefully and slowly turn the pot until you are satisfied. I wish the landlord this star.

Can be able to need to add something: a C-wave high-frequency head (or a Ku wave but the Ku difficulty coefficient is too high) and a 22K switch. Let 2 signals and 1 channel achieve 1 pot double star!

You still need to be patient with the stars.

Yes, the current satellite TV receiving pot has a pot with two high-frequency heads, you can go and change the pot shelf, and then buy a two-in-one security line branch, a few dollars, connected to the receiver, when adjusting the satellite parameters of the receiver, the 22V switch of the two satellite signals, one is on, one is off, you can do it This is how my family does it myself, and I also help others install satellite dishes.

If the position of the pot remains the same, you can, and you can get a high channel to receive the signal of Asia 3s, but the pot is required to be larger, with a difference of 10 degrees, and a pot of double stars can receive the star 6b and Asia 3s at the same time.

Yes, just buy a high-frequency head and 22k.

Yes, the main focus is aligned with the sub-3s, the partial focus is on the star 6b, and then connected by the 22k switch or 4-1. Change the position of the pot a bit, unless your pot is big enough.

The size of the pot should be more than 120 cm in one pot with two high-frequency heads and a 22k switch.

Yes, but it depends on your location and the size of your pot lid, generally speaking, the Northeast needs 1 meter 5 pot lid to achieve your requirements. In addition, you can add two heads, and 125

Yes, it's a pot and two stars. It can be achieved with a C-high frequency head and 22K.

It's very good!!

Two high-frequency heads, one 22k ok done!!

Yes, at the same time as the star 6b, add a pot to align with the 3s star, in, that is, 10c on the right side of 6b, buy a 22k switch, connect the two together, and you're good to go.

It should be possible, I have two major cauldrons in my house, one is Zhongxing 6b, one is Asia-Pacific 2 and Asia-3 and Xinnuo 3, a total of four stars and two pots.

Yes, but you have to add a high-frequency head. There is also a special stand, and it is about 40 yuan to add a 22k, but the pot of rice is smaller. But you can just watch it

Yes, just add an extra high-frequency head.

Adjusting the signal is the signal quality, and the strength is as long as it is connected to the line and the high-frequency head. You first look at whether the 0 tick mark of your high-frequency head is level with the ground. Only the level can receive the program.

After determining the 0 scale level, adjust your machine to Henan Station, and then press the signal quality according to the information, you will adjust it up and down in the south direction, take it slowly, pay attention to whether the quality has changed, when the signal indicator light becomes brighter, the signal quality has changed to about 45 or more.

Probably the direction or elevation angle is off.

Or the parameters have changed, first determine the signal quality, adjust a station casually, look at the signal quality, if it is much lower than before, adjust the pot, first move left and right slightly, if there is no response, turn back and then up and down the elevation angle, know that the signal strength is restored.

With 3706 level (h) 4420 3 4 Fujian Southeast Satellite TV tuning star F head to 6 o'clock.

Southwest direction, a little west, the elevation angle is not high, the signal strength is useless, as long as the lines are connected, there is strength.

See if there are any obstacles near your pot as well. If you want to settle in the house, you have to use a pot of 60 or more.

The windows have to be replaced, and there's no barbed wire or anything like that, no metal or floors.

Hold the pot in your hand and move slowly, and look at the angle of the other person, and find the approximate position.

Find a power cord that is long enough and find a closed line that is three meters.

Lift the TV to the side of the pot, connect the receiver, you should be able to connect it and lock the signal on the frequency of the ** station.

Okay, now all you do is the pot turns slowly, slowly. If you see that the signal quality has improved, then it means that it is basically right, and then adjust it slowly, if it is not more than 30%, you also have to fine-tune the angle of the high-frequency head, in addition, pull the high-frequency head a little higher. Well, when the signal of the ** station reaches stability, you can start to input the parameters of other stations, and you can do it.

Take your time, what you haven't looked for is not easy to find, and you can't say clearly.

This is the latest parameter, except for **1 encryption.

Zhongxing VIB"The communication satellite was developed and produced by the French company Thales Alenia. "Zhongxing VIB"The satellite is a new generation of radio and television satellite developed by Alcatel Alenia Space in France, the satellite adopts the Alcatel 4000C2 satellite platform, with a design life of 15 years, loaded with 45 ** devices, covering China, Southeast Asia, the Pacific Ocean and Oceania, and can transmit 300 sets of TV programs.

This is more complete, go check it out.

Chinese Star Hunting Network.

First CCTV1 was tuned to the highest, and then Hunan Satellite TV.

Adjust the height to the maximum mass facing the southwest corner. Then adjust left and right, to maximum quality. After that, adjust the high and low to the left and right, and adjust the maximum value.