-
Anonymous users2024-02-09The main filter materials of microporous pleated filter element are: stainless steel wire mesh, sintered mesh, polypropylene, hydrophobic PTFE, hydrophilic PTFE, polyethersulfone, nylon, etc., and most of the raw materials are imported from abroad.
Polypropylene membrane is used as the main filter material, which is an advanced fixed depth filter element with a nominal rating range of up to 60 m. The filter membrane is not affected by the fluctuation of feed pressure, which affects the filtration accuracy. Its unique advantages of low differential pressure, high flux, good filtration accuracy and low economic cost are favored by the majority of users.
Pleated filter product features:
Relative filtration accuracy, the rejection rate is more than 90%.
It has wide chemical compatibility, large flow capacity and low differential pressure.
There is no phenomenon of medium falling off, which is in line with the standards of the pharmaceutical industry.
A wide range of filtration ratings is available to meet a wide range of application requirements.
Welded by hot melt process, it is strong and does not pollute the product with emissions.
It can be cleaned and recycled, and it is economical.
Typical applications for pleated cartridges.
Reverse osmosis water system, deionized water system pre-filtration.
Filtration of beverages, alcohol, mineral water, purified water, edible oil, etc.
Filtration of chemical solvents, fine chemicals, inks, etc.
Liquid medicine, chemicals, and chemicals are filtered with water.
Others: biological products, plasma, oilfield reinjection water, gas filtration, etc.
Product Features: Excellent chemical compatibility for filtration of strong acids, bases and organic solvents.
The membrane is pleated depth filtration, and the membrane filtration area is large.
Low differential pressure, strong dirt-holding capacity and long service life.
A wide range of filtration ratings is available.
Fields of application. The FPN filter is an economical filter that can be used as an alternative to membrane filter elements.
post-filtration of ion exchange beds;
as a pre-protection filter for expensive final fine filtration;
filtration of bulk chemicals;
It is used for the filtration of fluid polymers, coatings, inks;
Capture and filtration of bacteria in beer.
-
Anonymous users2024-02-08The filter element and end cover of the oil filter are generally bonded with glue, and the glue of the adhesive filter is temperature-resistant, oil-resistant and has a certain bonding strength.
-
Anonymous users2024-02-07Filter Element Paison Imitation Glue is the abbreviation of special glue for filter element, which is used to bind the end cap of the filter element and the adhesive of the filter paper. In order to explain the use of white filter cartridge glue, we must understand the structure of the filter element.
-
Anonymous users2024-02-06The position of the end cap is at the two ends of the filter element, and the filter paper and skeleton are combined into a whole, so the function of the filter element glue is to bond the end cap and the filter paper skeleton.
1. Breakfast. No matter where you are, porridge must be a regular breakfast food, many people like to drink a bowl of hot porridge in the morning, not only nutritious but also easy to absorb, the operation is relatively simple, there is a friend is running a porridge shop, only porridge and other products are not, but the business is very hot, individuals run a porridge shop or a mobile stall, simple operation, low input costs. >>>More
It is recommended to learn to be a chef. Meet thousands of delicacies, meet thousands of people, and know and cherish thousands of lives. >>>More
According to the water reduction and enhancement ability of the superplasticizer, it is divided into ordinary superplasticizer (also known as plasticizer, the water reduction rate is not less than 8%), high-efficiency superplasticizer (also known as super plasticizer, the water reduction rate is not less than 14%) and high-performance superplasticizer (the water reduction rate is not less than 25%), and is divided into early strength type, standard type and retarding type. According to the composition of the materials, it is divided into: (1) lignosulfonates; (2) polycyclic aromatic salts; (3) Water-soluble resin sulfonates. >>>More
Buy a new pot, first of all, clean it, remove the earthy smell of the new pot, some people use the method of boiling to disinfect, that is, use a clean and odorless pot to hold water, put the pot into the water, boil over low heat, put some tea leaves inside, take out the pot after boiling for a period of time, put it in a smellless place to dry, boil the pot, the fire should not be too strong. About half an hour is appropriate. After boiling the pot, scoop it up and let it dry, then wash it with water, don't let the boiled tea residue stay in the pot, and then let the pot dry. >>>More
1. New energy is a hot auto repair major in recent years, because compared with traditional auto repair, the maintenance process is more technical and clean, and it is suitable for students who want to do high-end auto repair industry. >>>More