How many layers do oil absorbent bags have? How many layers can be made of oil absorption bags? What

The oil absorption filter bag has an efficient oil absorption capacity, which can quickly absorb all kinds of grease that is higher than the weight of its own material. Multi-layer composite depth filtration structure. Double-layer effect, oil absorption and impurity interception. Broad filter material chemical compatibility, large slag holding capacity, and long service life.

Material: polypropylene absorbent cotton + polyurethane, nylon (MO) polyester (PE), nylon (MO) polypropylene (PO).

Ring mouth: stainless steel, PP, PE

Size: 1 (180*420mm) 2 (180*810mm) (105*230mm) 4 (105*380mm) (150*520mm) and other non-standard sizes.

Wing paint coating line, wastewater discharge pretreatment, circuit board production recycling water, automobile production coating line, metal casting, ultrafiltration pre-protection filtration, spray water filtration, oil filtration, etc.

In the first year of Kangxi (1662), Pu Songling began to write fox ghost stories when he was 22 years old. In the spring of the eighteenth year of Kangxi, the 40-year-old Pu Songling collected the manuscript into a book for the first time, called "Strange Tales from Liao Zhai", with a preface by Nan Gaoheng. Since then, it has been added repeatedly.

Until around the 239th year of Kangxi and the 46th year of Kangxi, there were still a small number of supplements to the book. The writing of "Strange Tales from Liaozhai" lasted more than 40 years and devoted most of Pu Songling's energy to it. [3] Character introduction.

Efficient oil absorption, which can quickly absorb all kinds of grease above the weight of its own material. Multi-layer composite depth filtration structure. Double-layer effect, oil absorption and impurity interception.

Broad filter material chemical compatibility, large slag holding capacity, and long service life.

The oil suction filter bag adopts a multi-layer structure composed of filter felt cloth, oil suction layer and protective mesh layer, which is specially made for some industries, such as automobile manufacturing, component manufacturing, chemical process, wastewater treatment and metal casting industry, which can not only remove oil, but also filter out particles of different sizes according to needs.

To choose the right filtration system, you should first understand the maximum flow rate, viscosity, and impurity content of the filtered media, as well as the operating pressure, temperature, impurity particle size distribution, chemical properties of the medium, the type and size of the piping, and then select the corresponding filter and filter bag. Refer to the table below for details, select the matching filter bag and then select the filter (by bag filter product catalog).

Of course, the more layers, the better the filtration effect, the reason is actually very simple, there are several layers that are filtered several times.

The oil absorption filter bag has excellent hydrophobic and lipophilic, fast oil absorption speed, large oil absorption, acid and alkali resistance, organic solvent resistance, and good flexural and tensile strength.

Filter bags are designed to remove trace amounts of oil from liquids. The tiny fibers in the filter layer capture the high tension of the oil molecules and intercept the fine particles in the liquid. The high-efficiency material can absorb up to 20 times its own weight in oil.

Size: 1 (180*420mm) 2 (180*810mm).

#(φ105*230mm) 4#(φ105*380mm)

(150*520mm) and other non-standard sizes.

Meltblown polypropylene oil absorbent cotton has excellent hydrophobic lipophilicity, fast oil absorption speed and large oil absorption capacity (15-20 times of its own weight, water absorption is less than times). Good resistance to acids and alkalis, organic solvents, and good flexural and tensile strength. Remove trace amounts of non-emulsified hydrocarbons from liquids.

This type of filter bag not only removes oil, but also removes different grades of particles as required.

Material: polypropylene absorbent cotton + polyurethane, nylon (MO) polyester (PE), nylon (MO) polypropylene (PO).

Product advantages: high-quality oil-absorbing filter bag The core of the oil-absorbing filter bag is made of 100% pure polypropylene multi-layer meltblown, meltblown polypropylene has lipophilic, and the filter cloth composed of it has the performance of absorbing grease and has better degreasing filtration efficiency.

Features: 1.Efficient oil absorption, which can quickly absorb up to 23 times the weight of its own material for all kinds of grease.

2.All use FDA-compliant sanitary capillary fiber filter material, free of silicone contamination.

3.Multi-layer composite depth filtration structure.

4.Double utility. Absorbs oil and intercepts impurities.

5.1 100 micron accuracy range, nominal accuracy.

6.It is equipped with a patented plastic sealing ring that is highly efficient and leak-proof.

7.Broad filter material chemical compatibility.

8.The surface of the filter material is professionally treated to prevent fiber freeing.

9.Large slag cut-off and long service life.

10.The best replacement pressure difference is MPa, and the maximum should not exceed MPA The application of LCR oil absorption filter bags in electrophoretic coating in the automobile manufacturing process; While improving the filtration quality, it can quickly and effectively remove the silicone oil components in the bath to avoid the formation of shrinkage holes. The special design does not trap the pigment components in the lacquer.

Plastic is oily, it is a petroleum product itself, and the plastic bag itself has very small invisible holes, and the oil and plastic dissolve each other and can penetrate out. Water and plastic bags don't get out of the way, of course. There are very small pores that will not seep out due to the surface tension of the millet.