What to do if the toilet leaks, and the solution to the toilet leakage?

From which part of the leakage, if it is leaking from the water tank, you can take off the drain machine core, clean up the scale, if not, can be replaced: if the bottom of the toilet is leaking, hit glass glue, can not be used within 24 hours, or remove and reinstall. If the float is leaking, see if the float is damaged, if yes, replace it, if not, take off the float, put glass glue on the float gasket, and install it.

Go directly to the toilet repairer. There is no way around that. I can't save the birds. ‘

The domestic toilet is still quite powerful, well, the little master.

If the toilet is used for a long time, it may leak. So what are the causes of a leaky toilet? What to do if the toilet leaks? Let's take a look.

1. Why is the toilet leaking?

1. The toilet is made of inferior materials or aged. Nowadays, there are many brands and types of toilets on the market, and some small manufacturers in order to earn more profits, the production of flush toilets are mainly inferior materials, although it cannot be seen on the surface, but after a period of use, there will be various quality problems. Of course, it is not excluded that aging or deterioration occurs due to long-term use.

2. The water tank accessories interfere with each other. The mechanisms of the water tank accessories interfere during operation, resulting in water leakage. For example, when the water tank is discharged, the float and the float rod will affect the normal reset of the flap and cause water leakage.

In addition, the float rod is too long and the float is too large, which causes friction between the water tank wall, affects the free lifting of the float, and leads to the failure of the seal and the leakage of the hole.

3. It is not installed properly. Many toilet leaks are caused by the fact that they were not installed properly, resulting in the ground drain not being aligned with the toilet drain. In this way, not only will the residual stove leak, but also the odor will continue to be generated.

Second, how to deal with toilet leakage.

1. Replace the sealing ring. Scrape off the glass sealant connected to the toilet base and the ground, then lift the toilet bowl and tilt it, check whether the sealing ring on the toilet drain is intact, whether there is any damage or poor sealing problem, generally the leakage around the toilet is caused by the old damage of the sealing ring, so replace a sewage outlet seal, and then fix the toilet back.

2. Tighten the switch and replace the rubber ball valve. Check whether the connection between the spherical float of the water tank and the water inlet switch is loose, and if the float is in place, then see if the switch is not closed. At this time, as long as the connection between the float and the water valve switch is tightened, if the rubber ball valve is damaged or aging caused by water leakage, it is best to replace it immediately.

3. Reinstall. If the toilet leaks due to a leak in the connection between the toilet bowl and the sewer pipe, it is necessary to reinstall the toilet. First open the toilet, check whether the internal sewer connection is damaged, be sure to repair or replace it first, then install a new flange ring, and then install the toilet back and seal it again.

There are many reasons why a toilet leaks and there are many solutions. Therefore, when the toilet leaks, you should first find out the cause of the leakage, and then find a solution to the leakage.