The battery of the Nikon L4 is not charging, so buy a replacement NiMH battery

The battery may be full, don't put it in the camera to look at, find a *** to see and recharge it when you run out. In the future, I will buy a set of lithium battery for 6-7 ten yuan.

As we all know, there are four kinds of AA batteries, nickel-shielded nickel-metal hydride dry batteries, lithium batteries, among which nickel-metal hydride and dry batteries are the most commonly used, but they feel very power-hungry when placed on digital cameras, in fact, manufacturers are also helpless, because manufacturers consider that there are four kinds of batteries, especially lithium batteries are difficult to compatible, and the characteristics of lithium batteries are. The characteristics of nickel isolation nickel-metal hydride are, so that the two series connections are due to the minimum discharge voltage of lithium battery, so the manufacturer will set the minimum working voltage in, so that nickel-metal hydride, dry battery can only run in the above, some manufacturers will set up a transfer switch in the battery compartment, but will not inform the user, only the use of the original battery can be reflected (about 200 sheets), why some users think that the original battery is good, the domestic one is not good. Besides, someone can take dozens of photos with a high-power nickel-metal hydride battery, which may have something to do with the charger, there are two kinds of chargers, full self-stop (fast charging), and another estimated time (slow charging), the estimated time of the battery is no problem, if it is not used up, it is also charged according to the time used up, then it is no problem to charge to the above, but the life of the battery will not be very long.

Buy a set of three eneloops with 4 batteries plus a charger So you have two sets of batteries.

Lithium battery charging and discharging need a protection board, NiMH battery does not need it, and the capacity ratio of NiMH battery is better, the capacity of NiMH battery with the same volume will be much higher, and NiMH has more advantages in **.

Nickel-metal hydride batteries are all standard sizes, and lithium batteries have so many sizes, how to meet the needs of the civilian market?

The share is constantly decreasing, completely replacing also. There's a process.

It is impossible for any one product to fully occupy the market

The electricity is not full of flashes, full of off, normal, it won't take long for you to fiddle with it, nikon batteries are originally water, buy one more piece of self-defense.

The indicator light will not flash when it is fully charged, as written in the manual.

It's good to fiddle with it for 1 hour with the LCD on.

Yes, if you use direct charging, the battery will not be charged when the battery is completely empty, so do not use the battery until it is automatically shut down and recharged during future use.

Battery dormancy caused by excessive power consumption, can be charged by universal charging results, I tried it, good luck!

My camera did the same, but it's solved now.

The capacity of the battery only determines the time of charging and is not directly related to the charger itself. The larger the capacity of the battery, the longer it will take to recharge. So, you can charge any NiMH battery with the MH-71 charger of any capacity, but the larger the capacity of the battery, the longer it will take to charge.

The power of the charger itself only determines the number of batteries it can charge at the same time. The power of a charger that can charge 4 batteries at the same time is definitely greater than that of a charger that can only charge 2 batteries at the same time.

Theoretically, as big as you want, as long as the charging current is not too different.

The maximum output of the charger is 2000mA, and it should be no problem to charge a large capacity, but it is estimated that it will take longer.

OK. When using it, be careful that over-discharged lithium batteries will break.

You can use a power lithium battery to replace the nickel-metal hydride battery, and the single-cell voltage of the power manganese lithium battery is connected in series with two voltages, and there is no need for string resistance. Note that lithium battery is divided into capacity type and power type, if you use capacity type, although it seems that the capacity will be larger, but it may not be able to bring the remote control car motor. Because you don't know the motor power in your remote control car, it depends on the situation whether to add a protective board or not.

If you are interested, you can come to my ** store "Lithium Benz" to have a look.

As long as the voltage of the battery is the same and the overall size is the same, it is fine.

What remote control cars need is electricity, and it doesn't matter what we do with electricity.

It's like when we eat, whether you make it yourself or buy it from a restaurant, you can fill your stomach.

I've used it that way. Nothing is noticed. But replace one piece with two. Let's string it up.

Nothing to fool around.

Does it make sense? If you don't buy a good one, you can't do it.

Maybe the positive and negative poles are connected wrongly, and the voltage of your lithium battery is volt, so the working voltage of the remote control car must also be volt, which is remote control.