Brother 7880dn how to clear after adding powder

The brother 7880dn all-in-one machine I bought for the company, due to the company's large printing volume, the original toner cartridge** is high, so I bought a replacement toner cartridge that can be powdered. After adding powder, the machine still shows "Replace toner cartridge". No way, I asked the customer service who sold the toner cartridge to consult, and asked me to disassemble the toner cartridge and toggle the zero nut to adjust, and it was indeed zeroed.

But. There are two times later, I toggle the nut and go up to the machine, and as soon as the machine runs, it shows "replace the toner cartridge". Finally, looking for a solution on the Internet, I finally found a very good way to send it out to share with everyone:

After the machine shows that the toner cartridge is replaced, take out the toner cartridge, be sure to empty the waste toner inside, and then fill it with new toner, after loading it into the machine, if it still shows that the toner cartridge needs to be replaced, do not rush, open the front cover, press and hold the "OK" button for 3 seconds, the panel displays the replacement compact: 1 Yes, 0 No, regardless of it, press the "Start" button, then press 00, "Accept" is displayed, press "OK", close the front cover, and then you will hear the printer adjust the zero nut by itself. The toner cartridge is ready to use.

Compared to opening the cartridge to adjust the zeroing nut, this method is simple and quick, and it does not damage the cartridge, which is very practical.

Brother DCP-7060D Zeroing Steps:

1. Open the front cover.

2. Press the [clear] return button, and [Replace toner cartridges? Upper triangle y is lower triangle n no] ignore it.

3. Press the [Enable Start] button, and [Blank Screen] will appear, so you can proceed directly to the next step without waiting.

4. Press the [+] plus key (up arrow) - to 11

5. The [OK] button will appear [Accept].

6. Close the front cover.

Brother Printer MFC-7880DN Zeroing Steps:

1.Open the front cover;

2.After pressing and holding the OK button for about two seconds, it will prompt "whether to replace the toner cartridge", ignore it. Press the start button in the lower right corner;

3.Enter the number "11", close the front cover, and the system starts to clear.

Meaning of zero toner cartridge chip: The printer needs to replace the toner cartridge chip.

The toner cartridge chip is to record how much paper is printed on the toner cartridge in the printer, how much toner is consumed, and when the manufacturer's setting value is reached, the printer will prompt you to replace the toner cartridge, or the toner cartridge life will expire when it pops up on the computer. The toner cartridge chip storage used to record data in the printer is full, and it has reached the maximum value set by the manufacturer.

Cartridge life: The amount of paper that the printer cartridge can print. The larger the amount of paper that can be printed, the longer the life of the toner cartridge. The length of the cartridge life is determined by the drum.

For small and medium-sized office users with relatively difficult printing tasks, they should be willing to pay more purchase costs for higher monthly printing load (more than 10,000 pages) and long-life toner cartridges (up to 20,000 pages) - the reliability of models with higher indicators is generally more prominent, otherwise paper jams and even "lying in the nest" and frequent replacement of toner cartridges will greatly reduce printing efficiency, increase maintenance and overall printing costs.

Cartridge replacement: For laser printer users, there are three options when it comes to replacing toner cartridges: original cartridges, universal cartridges (or compatible cartridges), and refilled cartridges.

Print quality is definitely the first factor that customers need to consider, and it goes without saying that the original toner cartridge is the obvious choice. Original toner cartridges are designed with careful integration into the rest of the printer and meticulous manufacturing processes to create the desired printing results that are significantly better than other compatible products.

Toner cartridge clearing: 1. Open the front cover.

2. Press the clear button to display the replacement cartridge

1 Yes 2 No;

Press 1 and after a few seconds you can close the front cover, and you're good to go.

Turn the lid gear sentence two times to the right, and that's it.

Press and hold OK, then the replacement cartridge interface appears, press the start button directly, manually enter "00" (two zeros), and then press the OK button.

Device: CanonModel: 7480D1. Press and hold the stop button while holding the power button (don't let go, and then proceed to the next step).

2. Keep the power button pressed unchanged, release the stop button.

3. Wait for about two seconds after the previous operation, then press the stop button twice, and release it immediately after pressing the stop button, no need to press it.

4. When the display shows 0, click Main in ClearInkCount.

5. Next, wait patiently for the response to be completed, restart the device to complete the clearing operation, if there is no successful completion of the clearing operation, you can try to follow the above operation again several times.

Step 1: Pull out the toner cartridge assembly from the machine and press the green handle to separate the toner cartridge from the compact

Step 2: Peel off the seal on the powder cap and pry open the powder cover with a screwdriver.

Step 3: Pour out the remaining toner from the cartridge and clean the cartridge with a balloon blow so that there is no residue as much as possible, otherwise there may be ghosting in the print.

Step 4: Pour in new toner (70g is suitable), close the lid back on, put the cartridge back into the cartridge cartridge, and put the cartridge assembly back into the machine.

Finally the toner is cleared:

1. Open the front cover.

2. Press the clear button to display and replace the toner cartridge and ignore it.

3. Press the enable button again and then press 00 to close the front cover after a few seconds.

1. After adding powder to the Brother 7380, directly click the clear button on the printer panel.

2. At this time, if there is no problem, continue to click the icon button through the printer panel.

3. In the next step, after the above operations are completed, it is necessary to determine the clearance of Brother 7380 after adding powder.

4. In this way, the relevant functions will be enabled, and the purpose can be achieved.

Brother 7360 printer powder clearing method;

Toner clearing: 1. Open the front cover;

2. Press the Clear button;

3. Press the enable button again and then press 00 to close the front cover after a few seconds.

Toner cartridge clearing: 1. Open the front cover.

2. Press the clear button to display the replacement toner cartridge: 1 Yes 2 No; Press 1 and after a few seconds you can close the front cover, and you're good to go.