What is the method to unclog the blockage of the water hopper sewer?

1. Waterway dredging agent: it is the best product on the market. This product is especially effective for clogging blockages caused by hair, greasy, paper, etc.

It is widely used in restaurants, hotels, homes, etc. for dredging vegetable sinks, basins, bathtubs, floor drains, and toilets. Do not damage sewer pipes (including PVC pipes) and do not damage the plating layer.

How to use: Remove the stagnant water in the sink or sanitary ware, pour 50-100g of this product into the sewer pipe, if there is no water in the sewer, ** into half a cup of water. At this time, the pipe is boiling. Rinse with plenty of water after about 20 minutes.

Second, the practice of unblocking the drain of the bathtub: (mainly due to the blockage caused by the hair left behind in the bath).Because there is a cover at the drain in the bathtub, you can only dredge it from the floor drain, go to a small store to buy a 8 yuan hand-cranked spiral wire, (about 6 mm in diameter) from the floor drain while shaking and pushing downward, until the hand shakes a foreign body feeling, and then gently pull it out while shaking, and the clogged hair and other dirt will spin on the spiral wire, and the problem is solved.

It's very convenient. It is even more convenient if there is no cover at the drain in the bathtub. (Don't use hydrochloric acid, firstly, pollute the environment, secondly, it is easy to cause danger to the human body, and thirdly, the pipeline is easy to be eroded by hydrochloric acid and perforated for a long time, and the trouble is even greater).

3. Put caustic soda into the mouth of the sewer, and then pour a pot of boiling water into it, not a warm kettle, but a large kettle for boiling water.

Fourth, if you have used the water to pour the child and ask the worker to use the iron branch to pass through and slightly smooth, but then do not go to the water, it is not suitable to use the iron branch again, for fear that the anti-corrosion channel will be penetrated. You can use thick rattan instead, the rattan head can be nailed ten eight inches long iron nails, one side stretches into one side and turns and stirs, loosen the debris, and then pour it with a concentrated alkali solution, and then push the rattan out and pull it out, if it continues many times, it can be effective. In addition to thick rattan, you can also buy a spring canal device from a hardware store, which has a better effect.

Salt, white vinegar, straws, etc., used by ordinary people, do not work.

Don't worry about getting a clogged sewer to fix it, just one of these things can be easily dredged.

Shantou Shunli Qingtong Company is pleased to answer for you: household pipeline dredging skills.

You can also do it yourself@

1. Start by pouring more than half a cup of baking soda into the drain.

2. Add twice the amount of white vinegar.

3. Let stand for 5-10 minutes.

4. Then pour hot water into the sewer.

PrecautionsCauses of clogged waterways.

1. Hair causes sewer blockage: After a period of use, the hair of the usual bath will hang on the pipe wall and accumulate more will cause blockage, and the hair will generally cause the toilet floor drain to be blocked, the washbasin to be blocked, the bathtub to be blocked, and the shower room to be blocked. Therefore, when you usually use it, you must cover the floor drain cover and other protective facilities, and if you have hair, you can pick it up and throw it into the trash.

2. Oil scale blockage: Oil scale blocking sewers generally appear in the kitchen, this blockage is generally the scaling of the inner wall of the pipeline, and the sewer is not smooth after serious scaling of the pipeline. It can not be solved with a simple dredging method, there will be just dredging and blocking, blocking, blocking, such is a vicious circle, to completely solve the problem can only be to use a high-pressure water truck to clean the inner wall of the pipeline, or replace the new pipeline.

Relatively speaking, it is more economical to use a high-pressure cleaning truck to dredge.

3. Pipeline collapse and pipeline dislocation: This kind of blockage generally appears on the ground floor and outdoor sewers. There is no good solution: only find the exact location of the dislocation of the collapse, dig and replace the pipe, and the best tool is to use the pipeline TV (pipeline detector) to accurately judge.

1. Start by pouring half a cup of baking soda into the sink.

2. Then add twice the amount of white vinegar.

3. Then wait for 5-10 minutes.

4. Finally, pour hot water into the sewer.

1. Water pressure dredging method: If it is only some small objects caused by the blockage of the toilet sewer, it is easy to solve, and the impact of water pressure can be used to wash away the small objects to dredge the pipe. It is recommended that you first plug the other gaps in the sewer outlet, then connect the faucet and the sewer outlet together with a pipe, then turn on the faucet and adjust the water volume to the maximum for a few minutes.

2. Acid-base reaction method: If there is a serious blockage in the bathroom sewer pipe, which cannot be solved by physical methods, then you can only come to some real guys. Start by preparing the baking soda and vinegar and place the baking soda and vinegar in 1:

2 ratios to mix, stir well, then slowly pour in an appropriate amount of water, stir it again and pour it into the blocked sewer pipe, wait for a period of time, and when the foreign matter in the sewer pipe is dissolved, flush it several times with water to the sewer mouth. Here is a reminder to everyone that when using this method, you must wear rubber gloves and masks to avoid unnecessary trouble in the process of dredging. 3. Wire dredging method:

Clearing the drain with wire is also a very common method, especially when the drain is clogged by hair, using wire to deal with it is the best way. After all, girls will lose their hair more or less when they wash their hair, and some of the hair will stick to the inner wall of the sewer when the hair rushes into the sewer, and it will be clogged after accumulation. At this time, we find a wire, break one end of the wire into the shape of a hook, and put the wire into the sewer to pull out the blockage.

If there is no wire at home, you can also find some long strips to replace it, which can also play a role in dredging. 4. Use pipe dredging agent: If you feel that it is very dirty and tiring to dredge the sewer, you can buy some pipe dredging agent to solve it.

It is most suitable for dredging blockages caused by various organic substances such as grease, hair, vegetable residue, paper cotton fibers, etc., and at the same time, it can also remove the foul smell of the pipeline, kill the bacteria and parasites of the pipeline.

Hope it helps, dear

You don't need to find someone to get through the sewer blockage, teach you a few ways to dredge it easily!

Enter the area and get the decoration for free**].

Toilets, kitchens, balconies and other areas are all used sewers, if there is a blockage, it is more troublesome to use, if you ask a professional master to dredge the sewer, the charge is not low. In fact, the way to unclog the sewer is relatively simple, and you can solve it with just your fingers! How to unclog a sewer blockage.

1. Sewer dredging agent Dredging supermarket or hardware store has a professional sewer dredging agent, according to the above proportion to dredge the sewer, this method is very simple, as long as it is not blocked by hard objects, it is generally effective immediately, and it is not expensive.

Sewer dredging agent can quickly decompose hair, vegetable residue, grease and so on in the sewer, in addition to quickly dredging, remove odors, but also prevent pipe blockage and maintenance of pipes, prevent mosquito breeding. If it is not convenient to buy, you can also choose laundry detergent + baking soda + white vinegar to dredge the sewer, first pour an appropriate amount of laundry detergent and baking soda into the sewer mouth, and then pour in white vinegar, at this time a chemical reaction will occur, you will see the sewer mouth bubbling, and finally use a stick to stir it to see its dredging. Second, use the hand spring dredge dredge hardware store sells hand spring dredger, directly open the screw, extend the spring into the pipe, and then press down, and then rotate the crank in the clockwise direction, wait until the blockage is taken out, and then pull out the dredge or spring forcefully, if you find that you can't pull it out, you can turn the crank counterclockwise when you can't pull it out.

3. Use caustic soda to dredge a pot of boiling water first, then pour caustic soda into the sewer, and then pour the boiling water directly into the sewer mouth, when the boiling water dissolves the caustic soda, you can melt the stain away, wait for ten minutes, and then pour a bucket of water into the sewer to find the blockage dredged. Conclusion of the article: The relevant knowledge about unclogging sewers will be introduced to you here, I hope it will be helpful to you.

If the above methods still cannot be dredged, it is recommended to ask a professional dredging master to deal with it, so as not to cause unnecessary trouble.

Do the math how much it will cost you to renovate your home

1.Use a chemical cleaner: You can buy a sewer spine cleaner on the market, use it according to the instructions, pour the cleaner into the drain, wait for a while, and rinse it with hot water.

2.Use a plumbing unclogger: A plumbing unclogger is a tool specifically designed to unclog sewers and can be purchased at a household goods store or supermarket.

Insert the unclog into the drain, rotate and push until the blockage is cleared. 3.Use suction cups:

Place the suction cup on the sewer opening, press the suction cup firmly, then pull it up quickly, repeat a few times, and the takano socks can suck the blockage out. 4.Use hooks:

Bend a hook into a hook shape, insert it into the drain, and scrape vigorously until the blockage is removed. 5.Use a high-pressure water gun:

It is possible to buy a high-pressure water gun on the market, point the water gun at the sewer, and turn on the high-pressure water flow until the blockage is washed away. Notes:1

When using chemical cleaners, take care to protect your eyes and avoid contact. 2.When using tools such as pipe dredging, suction cups, hooks, etc., take care to protect your hands and avoid injury.

3.When using a high-pressure water gun, take care to protect your eyes and body to avoid injury.

There are several ways to deal with a sewer blockage:

Hot water flushing method: boiling water is poured into the sewer, and the hot water can soften the oil content in the pipe, such as grease and dirt, so that it can flow easily, so as to achieve the effect of dredging.

Mechanical dredging method: Use professional pipe unclogging tools or hooks to remove blocked objects, or remove dirt from the pipes by mechanical means.

Chemical dredging method: use a professional sewer dredging agent, pour it into the sewer, wait for a period of filial piety, and then rinse with water, which can dissolve the grease and dirt in the pipe and achieve the effect of dredging.

High-pressure water flushing method: Use a high-pressure water gun to spray water into the sewer, which can wash away the dirt in the pipe and achieve the effect of dredging.

It should be noted that when carrying out sewer dredging, Lao Lao should pay attention to safety and avoid using overly violent methods to avoid damaging the pipes. If you can't handle it yourself, it is advisable to seek professional sewer unclogging services.

1. Leather picks.

This should be a commonly used tool in the family, and it usually works well with a leather pick.

2. Waterway dredging agent.

With the continuous progress of society, there are more professional tools in the sewer pipe dredging, and the sewer pipe dredging tools are more common in the market.

The sewer dredging agent is more effective for the dredging of sewer pipes, and is mainly suitable for hair, paper, meat, vegetable leaves, greasy substances and other materials in sewer pipesup the blockage.

Plugs, waterway dredging agents are widely used in vegetable sinks, floor drains, basins, bathtubs, toilets and other places to dredge blockages. Waterway dredging agents do not make water pipes when used.

of the plating layer.

3. Elbow springs.

This is a special tool for pipeline dredging, a lot of debris and garbage can be cleaned up, very easy to use, the disadvantage is that it is more troublesome to clean after using it.

4. Self-made pipeline dredging strips.

It's a great idea, use a plastic pad or an old placemat, cut a slender strip along one side, about a centimeter wide and forty centimeters long, and then.

On both sides of the strip, cut out small serrations one by one, with the pointed ends pointing downwards, and the small serrations on both sides should be cut more - a little upward.

5. Hand crank spiral steel wire.

Since sewer clogged pipes are a daily part of our daily life and are also a frequent occurrence in the market. There are also many sewer pipe dredging tools, hand snails.

Rotating wire is one of the more common sewer dredging workers in daily use, if the sewer pipe blockage is caused by the hair falling out of the bath, in the sewer pipe.

When dredging, it is necessary to dredge from the floor drain, and push the hand-cranked spiral steel wire downward from the side of the floor drain until it feels a foreign object, and then pull the hand-cranked spiral steel wire.

out, the blockage will be screwed on the hand-cranked spiral wire, and the problem of sewer pipe dredging will be solved.

In our daily life, the water demand for the kitchen and toilet in the restaurant is very large, and the general water outlet is all immediately connected to the sewer pipe, in the case of application, if you are not careful, it may be accompanied by the injection of some dirt into the wastewater, resulting in the sewer blockage. Especially in the bathroom, the long-term accumulation of hair can immediately cause the toilet drain to become clogged. When I think of getting through the sewer pipes, I have a headache, I want to deal with it myself, but I don't know where to start, and I am dirty and unhappy.

What to do if the toilet drain is clogged?

1. Pressure transmission method:

If the toilet drain is clogged by just a few small objects, it is very easy to deal with, and the impact force of pressure can be used to flush the small objects away and unclog the sewer. It is recommended that you plug the other gaps in the sewer pipe mouth first, and then connect the tap and the sewer pipe mouth together with a pipe, and then turn on the faucet and adjust the water flow to a higher level for a few minutes.

2. Acid-base reaction method:

If there is a serious blockage in the toilet drain pipe that cannot be dealt with by physical means, then there is only one real guy left. First prepare baking soda and vinegar, mix baking soda and vinegar in a ratio of 1:2, stir well, then pour in appropriate cold water slowly, stir it again evenly and pour it into the blocked sewage pipe, wait for a while, wait for the foreign matter in the sewage pipe to be melted, and flush the tap water to the mouth of the sewer pipe several times.

Here is a reminder to everyone, in the case of using this method, you must wear rubber gloves and protective masks to prevent unnecessary inconvenience in the whole process of transmission.

3. Thin wire transmission method:

It is also a very common way for us to use thin iron wire to pass through the sewer pipe, especially when the sewer pipe is blocked by hair, it is best to use thin iron wire to solve the problem. After all, girls have more or less hair loss when they wash their hair, and some of the hair that rushes into the sewer pipe will stick to the inner cavity of the sewer pipe, and it will be blocked immediately after accumulating a lot. At this moment, we find a thin wire, tear one end of the thin wire into a hook, and put the thin wire into the sewer pipe to pull out the blockage.

If you don't have a thin wire at home, you can also find some strips to replace it, which can also have the effect of transmission.

4. Pipeline dredging agent:

If you feel that it is too dirty and tiring to get through the sewer pipes, it is also very convenient for you to buy some pipe unclogging agents to deal with it. It is most suitable for the blockage caused by various organic chemicals such as vegetable oil, hair, vegetable residue, paper and flax fiber, etc., and can also eliminate the foul odor of the pipeline, eliminate the pipeline germs, schizocephalic larvae, etc.

Operation method: 1. Take off 40 grams of dredging agent and pour it into the sewer pipe, add 1kg of water, wait for 10 minutes up and down, and wait for the pipeline dredging agent to be fully reflected;

2. Pour another 40 grams, add 1kg of water, and wait for 10 minutes;

3. Wait for 20-30 minutes, and use a lot of rinsing to get through.

Depending on the blockage situation, the actual transmission method is different.