What are the methods for kitchen drain repairs?

The kitchen drain is often blocked due to some leftovers or other foreign objects going into it, in order to avoid this situation, the sewer often has a stinky water bend, but if the kitchen drain is blocked, you can use the following methods to deal with it:

Clause. 1. Physical methods. There are two ways of physical methods, which I will refer to here as A and B; A way is to use a special kitchen sewer to dredge the wire, this wire is a kind of spring-like, can change with the straightness of the pipe, with this dredging wire for dredging is no problem for the general kitchen sewer blockage.

In the case of not dredging the wire tool, if the sewer in your kitchen is closed intact, then you can put water into the sink, and then use the leather bowl-like tool (which can be made by yourself) like a pump to pass the entrance of the sewer, mainly to pressurize the sewer pipe, and let the sewer pipe dredge itself under the action of pressure.

Clause. 2. Chemical methods. It is to buy some professional chemical reagents for dredging sewers, which are liquid and solid, and they are easy to buy if you search for them on a treasure; These reagents are dissolved in water at the right temperature, and at the same time, they can dissolve the substances that clog the sewer pipes, and when these substances are dissolved, the sewers will naturally be opened.

However, chemical reagents are generally carried out for plastic pipes, if the sewer in your home is metal, then you should be careful when choosing reagents, to see if the reagent also has a corrosive effect on the pipeline itself, and the pipeline can not be dredged, and the pipeline is also damaged more than worth the loss.

In short, the kitchen drain cannot always rely on maintenance, but try not to let dirty things enter the drain when using the sink daily, this is the treatment from the source.

There are three main causes of problems with kitchen drains.

The first is when too much oil stains condense on the walls of the pipes, causing clogged kitchen drains.

The second is that when washing fruits, the fruit stalk accidentally falls into the sewer pipe, and mixes with the small pieces of vegetables that are usually backlogged, resulting in a blockage of the sewer.

The last is that since the kitchen is generally a woman's world, the hair that has fallen out over the years will also be the cause of the blockage of the kitchen drain.

For the above three problems, choose different repair methods.

If it is caused by excessive oil, you can buy a detergent called Strong Oil Stain Cleaner at the supermarket. After mixing the detergent with water in a certain proportion, slowly pour it into the sewer and let it stand for a period of time, it can effectively disintegrate the oil stain, and then boil a pot of boiling water and pour it down the sewer pipe, you can wash the oil that has been disintegrated smoothly.

For the second method, we need a small whip, or a disposable chopstick, which can be opened directly.

For the third way, similar to the first, it is to buy a pipe dissolving agent that specializes in dissolving hair strands. It works the same way as dissolving oil, and the operation is similar, except that the dissolving agent used to dissolve hair needs to stay longer than oil.

In fact, there is one of the most labor-saving ways is to replace the pipeline, generally the price of a sewer pipe is about ten yuan, and the purchase of solvent will reach five or six yuan. Therefore, people who have conditions and strong hands-on ability can choose to change a sewer pipe for their kitchen drainage, and at the same time, at the water outlet of the sink, equipped with a small net basket, once there is a situation of accumulated sundries, it will be poured out in time, which can effectively avoid the kitchen drain from failing in the future.

How to deal with kitchen sewer leakage:

1. First of all, turn off the main gate of tap water, find a professional to investigate, and after finding the leakage point, you need to punch holes in the ground for maintenance.

2. During maintenance, wipe the leaking pipe, repair the leaking place with glue, and then wrap it with waterproof tape.

3. Next, open the sluice gate to test the water, observe for about 10 to 20 minutes, and after there is no water seepage, it can be sealed.

Tips for unclogging sewer pipes

1. When the pipeline is blocked, you can pour the pipeline dredging agent into the sewer pipe, if there is no water in the pipe, you should pour half a cup of clean water into the water pipe, wait for about 20 minutes, and then flush the pipe with a large amount of water. You can also put some caustic soda at the sewer pipe and pour a pot of boiling water into it, as long as the sewer pipe is dredged.

2. If the sewer pipe is blocked with some oil, pour boiling water directly into the sewer pipe, or you can buy some concentrated sulfuric acid, which can also play a good dredging effect by pouring these into the sewer pipe. Or go to the store to buy the powder to clean the pipes, it can be said that these ingredients are also lime powder, which can also play a good pipe cleaning effect.

The kitchen drain is the lifeline that connects washing and cleaning equipment, but if it breaks, it can pose a serious problem. When the kitchen drain fails, we need to make urgent repairs to prevent it from affecting the daily life of the residents. The following is an introduction to how to repair a broken kitchen drain.

1.Clean up the blockage.

Clogged kitchen drains are the most common problem, which can affect the number of water flows and can lead to overflowing pipes. We can use drains to try to solve this problem. This chemical can completely eliminate the substances inside the pipes to allow water to flow freely.

If drains don't solve the problem, you can use a long-rod cleaner or pump to clean up the blockage directly.

2.Replace U-bends.

The U-bend is an important part of connecting the water pipe to the drain pipe, and when the elbow is aged or damaged, the water may leak or cannot be discharged. Replacing a U-bend is relatively simple, just prepare a new bend and other necessary tools, such as a screwdriver, wrench, etc. Then, place the elbow in the correct position and tighten it with a screw, vertical knife and wrench.

3.Replace the faucet.

If the sewer problem is coming from the faucet, then consider replacing the faucet. First, turn off the water source and disconnect the old faucet. Then, install the new faucet in place. This requires the proper connection of hot and cold water pipes and the fixing of the faucet with a wrench and screwdriver.

The key to maintaining your kitchen drain is to ensure that regular inspections and cleaning are carried out to eliminate any problematic potato extracts. Here are a few effective ways to prevent sewer failures:

1.Avoid putting large pieces of food or large particles such as coffee grounds down the drain.

2.Avoid pouring in cooking oil or grease.

3.Regularly clean the pipes with a drain to help eliminate deposits from the pipes.

4.Regularly inspect the sewer for leaks or damaged parts and repair them promptly.

After repairs and maintenance, you need to make sure that the sink and faucet are in working order and that there are any problems. If the problem persists, you need to consider seeking the help of a professional plumbing service person.

Kitchen sewer repairs require the following steps:

1.Cleaning the pipeline: The first pin section needs to clean the pipe first to remove the blockage. You can use a pipe pass or clean it manually.

2.Inspect the pipes: Check the pipes for cracks or damage, and repair or replace them if necessary.

3.Replace the pipeline: If the pipe is badly damaged, the pipe needs to be replaced. You can choose between PVC pipes or cast iron pipes.

4.Installation accessories: Install pipeline accessories, such as elbows, tees, etc.

5.Test the pipeline: After the installation is completed, you need to test whether the pipe is normal, and you can use water to test.

6.Cleaning the pipeline: Cleaning the pipe can prevent the pipe from clogging again, and you can use a professional pipe cleaner or a high-pressure water gun to clean it.

It should be noted that if you are not familiar with plumbing repair, it is best to ask a professional plumbing repairer to do the repair to avoid greater losses.

The treatment of kitchen drains is very important, because if not properly treated, it can lead to clogged drains, cause foul odors and diseases, and even pollute the environment. Here are a few ways to dispose of kitchen drains and recommendations.

1.Wash after each use: After each use of the kitchen, rinse the drain with water to thoroughly flush away any residue. If you have the budget, consider using a high-pressure water gun for cleaning.

2.Regular cleaning: Regular cleaning of pipes can eliminate sediment and other garbage, which can prevent sewer blockages. Regular cleaning of kitchen drains is also effective in preventing the development of bacteria and odors.

3.Use chemicals: There are some chemicals that can be used to remove blockages in the drain.

These chemicals can usually be found in supermarkets, but be sure to follow the product instructions, as these chemicals often contain harmful chemicals that can be harmful to the environment and health.

4.Use manual tools: If chemical digging doesn't work or you don't want to use chemicals, you can also use some manual tools to clean your sewers. For example, a flush toilet can be used to pump out accumulated sewage and blockages.

In conclusion, care should be taken to clean and maintain the kitchen drain so that it remains in good working order. When everyone has this awareness, our environment and health will be better protected.

Here's how:1. If it is a PVC water pipe, you can buy a PVC water pipe to connect it yourself, first cut off the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can just be straightened, and then send it directly to this end, so that both ends have a certain cross connection distance (late length) and then disassemble it, and use PVC glue to apply it to the inside of the two ends and the outside of the two sewer pipes.

2. You can buy waterproof ant tape and code without repairing the sewer pipe, just wrap it up, and then use mortar waterproofing agent and cement to wipe it on.

3. It's better to find a professional company, if you can't handle it yourself.

Find the leakage point and treat the symptoms according to the leakage. If the pipe is damaged, it is recommended to replace it with a new one. If there is a water leak at the interface, it is recommended to change to a new rubber pad, and apply a thick white paint to the interface area, and then wrap the front with a special ribbon a few times.

If there is a leak in the faucet outlet, it is recommended to replace the valve core. <

Find the leakage point and treat the symptoms according to the leakage. If the pipe is damaged, it is recommended to replace it with a new one. If there is a water leak at the interface, it is recommended to replace it with a new rubber pad, and apply a thick white paint to the interface area, and then wrap it around a few times with a ribbon that is specially rented for failure.

If there is a leak in the faucet vibrillator, it is recommended to replace the valve core.

1. When washing things in the sink, drain things into the sewer, which will cause the sewer to wear and tear, and if it is a long time, there will be cracks, and then there will be water leakage when using water. 2. It may also be that the sewer pipe in the kitchen is used for a long time, so there will be aging and material deterioration. 3. Maybe the quality of the pipes installed at the beginning is not very good, and you may have bought defective pipes.

Suggested Treatment:

1. First of all, see if there are cracks in the pipe, if there are any glass glue, if there are big cracks, don't repair them, buy a new one directly, remove the old one first, and then install the new one.

2. Check whether the faucet connected to the sewer is broken, if so, then replace it with a new faucet, and then check it again to see if it is normal, or replace the valve core and shaft gasket in the faucet, the operation is not difficult, as long as the faucet is disassembled, and then use tweezers to remove the valve core, and then install a new one.

3. If it still can't be solved, then it is better to find a professional and let them come to help you check the specific problem, then it is easy to solve the problem.