The water pipe under the floor tiles is rusty, resulting in rotting, how to deal with it?

To deal with this knotted pipe, the pipe on the ground must be treated, not just this, because the ground has been in water for a long time and quickly corrodes and must be treated. The two corners of the wall must be damaged, and the water pipe on the wall is no problem, just deal with this section of the ground, not just deal with the chisel opening, so that you will be much more relieved, and you don't have to worry about the leakage caused by the rust of the pipe.

From the point of view of the smaller the movement, the better, pry the floor tiles to the place where the water pipe is stronger, and weld it with a section of water pipe, but it is necessary to consider whether the decoration is old and there are many decayed places.

My family has also tried this, and it is very troublesome to change the pipe, so at that time, my house was directly plated with a layer of chrome and sealed with cement, and it could still last for a few years.

Hello, I am a repairer of the water company, we often accept your questions, there are several ways, you refer to: 1Clean up the repair wound and buy it"Tap water rush repair and plugging cement"About 500 grams, according to the instructions, basically feasible.

It is a substance similar to cement, mainly in a short time, the total process is almost 15 minutes, and the water can be passed. 2.Buy one called"Huff Day"The tap water repair accessories, you should be DN15-20 pipe diameter, one costs about 15 yuan, that is, two and a half garden type pipes, similar to the kind of pipe cutting, you buy it and look at it.

3.Hehe, there are a lot of repair methods, for the time being, you 44. "

Then you have to buy a soft water pipe that is smaller than your iron pipe, and you can solve the problem by passing through the iron pipe and connecting it.

You can use a quick plug to plug the leakage point, this is just a temporary solution, it is recommended to replace, the general service life of galvanized pipes is about 10 years, your situation may be caused by unqualified materials, the cost of temporary methods is low, the fundamental problem can not be solved, and there may be water leakage elsewhere in the future. It is best to buy materials for decoration yourself, outsourcing is deadly.

Use glue materials to make up for the sprinkling You can try it.

The best way is to open a row and replace it with PPR pipes, worry-free, otherwise this will be repaired, and it may rust elsewhere, once and for all.

Stop the water first, then scrape off the rust, apply a layer of oil to the surface, and wait until it is dry, and then resume the water supply.

**Larger pipes, covered with cement, can be mixed.

Where are you, if you are looking for Baoyang Water Pipe Company in Shanghai, you can weld it with professional tools in 5 minutes, and my family asked Baoyang Company to repair it.

Buy a section of water pipe and connect it with a double pass.

Find a plumber to come over and change to a PPR.

I replaced the rotten one and pressed it on when I bought a new one.

Then warp the floor where the water pipe is installed and replace the water pipe.

Find a professional to fix it!! I can't do it myself!!

It is recommended that it is best to change the whole thing.

Or it will be more troublesome in the future.

It's the same now as it is later.

The water turn is off, find a plumber to fix it, and everything is solved!

Find a professional repair company: such as the three replacement companies in Hangzhou.

Cut off both ends of the hose and connect the hose ends with a hose across the floor.

Let's see if you can buy a section of water pipe and connect it with a double connection.

It's better to find a professional maintenance personnel to deal with it, because you are too noisy.

With the PPR's open pipe, the iron is not used.

Change the plastic tube, it won't embroider.

Please ask the worker to replace the new water pipe, and the water pipe model should be known, so that it is easy to buy materials.