-
Oh,Have you been using win7 before,When you bought it,。。
Before using win7 means that your computer is using genuine win7 is not a pirated disk, piracy and genuine disk is not the same, after using the genuine will have a win7 boot partition in your computer hard disk, that is the first startup item, when you install win xp, the system can not detect win7 so it can't start, 1 repartition your hard disk 2 use lossless partitioning software to delete the startup item of your computer, you can install xp to use. 3. Buy a win7 disc and install win7 to boot up.
-
Dear Lenovo users, hello! For this question of yours, you can refer to the Lenovo Technology Forum, which has the most complete technical questions, and there are professionals in the forum to answer your questions, and you can also communicate your questions with them. For more questions, you can consult the IDEA forum.
Forum Lenovo Community.
-
This can be installed by changing the power mode to AHCI under the BIOS before installation.
-
Reboot it, and if it really doesn't work, you have to reinstall it.
-
【 】Hello].
This situation is really difficult to do, many new models of notebooks no longer support XP system, even if it can be installed, it is also a problem to find a device driver that supports XP,
-
It is recommended to use a random win7 system. The XP lower driver may not be compatible, thus resulting in a blue screen.
-
Either hard installation, or get a clean system (that is, without any drivers, after installation, go up and down the network).
-
Blue screen generally has the following reasons:
1. The hardware driver does not match, 2. The memory quality is not good, 3. The hard disk has bad sectors, or the hard disk mode is wrong.
4. Virus in the system, 5. CPU overheating, mainly because these reasons will cause a blue screen, and the way to eliminate the blue screen is:
1. Start with the simplest to eliminate, scan the virus first, and see if there is a blue screen after antivirus.
2. Check the temperature of the CPU and related hardware, if the temperature is high, consider cleaning the cooling system or replacing the radiator or fan, 3. Enter the safe mode to delete the driver and then restart it (mainly the graphics card driver and storage driver).
4. Check whether the hard disk has bad sectors.
5. Replace the memory.
-
7th generation U? What to say after the sale.
-
Problem Analysis:
1. If it was Win7 system before, and then changed to XP system, please turn on the computer and press F2 or DEL key to enter BIOS, set the hard disk working mode to IDE compatibility mode, do not use SATA advanced hard disk mode when you first install XP, after installing XP, you can change back to SATA by modifying the registry and installing AHCI driver!
2. If you are using the Ghost system disk to install the XP system, then this situation will also occur at some point, please use the official original XP system disk to install, do not use Ghost to restore the system (not the real sense of the installation system).
3. If the above methods are invalid, then please check your hardware facilities: HDDs are generally speaking, computers generally support XP system, and the configuration requirements of XP system are much lower than Win7. The problem is usually that there is a problem with the system disk you are using!
-
The motherboard does not support XP, and now most notebooks do not support XP, and use win7 line.
-
This feels like the hard drive mode is wrong.
-
The probability of memory module problems is more than 75%, and the 25% chance is that the hardware temperature is too high, resulting in a crash or protective reboot or blue screen. Rule out the case of high temperature and blue screen of death restart.
Open the chassis. Plug the memory module back in. Two memory sticks. Just plug in just one.
Check whether the air dissipation of the CPU is running normally, whether there is a gap between the CPU and the heat sink, and whether the silicone grease is dry or cracked.
Add silicone grease and debug the air dissipation. Unplug all the hardware and clean it up.
In addition, the chassis has now been opened. Use a hair dryer to clean up the dust. Don't forget to go to the door and deal with it.
Otherwise, the house will be filled with smoke.
If it's still a blue screen. Just find a normal memory module and try it. Probably just fine. That means your memory module is broken.
If you are Ben. It's sad ... It's better not to disassemble this book by yourself for novices.
If it's a book, take it out and find a repair point, disassemble it, and try to change the memory.。。。 It is risky for novices to split the book. Think again.
There is also a 15% chance that it is a disk error caused by a 00000000ed error.
and drivers and other programs. The workaround is to enter safe mode, disable all startup items, and then start again.
When you're done, please give me the answer. Thank you.
-
Dear users, hello.
It is recommended to check whether new software or updates have been installed before the problem occurs, and it is recommended to test after uninstalling it. In addition, it is recommended to check for viruses and update driver tests.
If nothing works, it is recommended to back up the data and restore the system for testing.
Provides you with a way to install your XP system.
Provide you with a way to install the win7 system.
Have a great day.
-
Hello, what operating system are you using? It is recommended that you back up your data and restore the operating system.
One-click recovery method of ThinkPad pre-installed Win7 system.
-
Take it to the place where you bought it for exchange or repair
This still needs to be asked, it must be 28 young, 28 years old may not be married, but at 43 years old, you even have offspring, this is completely incomparable.
I don't know if the problem is with the battery or plugged in, if it is just when the battery is used, then as said upstairs, it is the dynamic frequency reduction of the CPU that causes the system performance to be low, prolonging the boot time, of course, according to the wcoetyu method to clean up the system's boot project is a good way, of course, it can also be changed by changing the options of the powermanager to make the CPU worker at a relatively high frequency to reduce the boot time.
Search it directly I just went up yesterday,,There is a built-in activation code on it,,But you'd better see it clearly Don't upgrade to 64 bits to 32,
Microsoft's "wog" does the weird.
My computer took the initiative to change to a black screen today. >>>More
When we use computers for study and work, sometimes our work efficiency will be affected by the slow running speed of the computer. ......At this time, we need to find out the reason why the computer is running slowly, and take targeted measures to deal with it, so as to improve our learning and work efficiency. >>>More