My computer can t get into the system? The computer can t get into the system?

Have you ever overclocked?

Overclocking, if it is overclocked too much, karma is this symptom.

Press F8 to enter safe mode when restarting, if you can enter. Removed the graphics card driver and took a look. If not, check the graphics card.

I've seen a machine like this. It's OK after discharging the motherboard. Oh! You can try this method first (remember to disconnect the power supply when discharging.

It's not going to be Microsoft hacking your screen! ~

Agree with the pickle girl,It should be a problem with the graphics card,It is likely to be caused by the aging of the graphics card (if there is no problem with the fan rotation on the graphics card),The graphics card is very easy to heat up when it is aging,When it is too hot, a black screen will occur、Phenomena such as a blurred screen cannot be displayed normally。 It is recommended to try it with a new graphics card.

You're all computer science majors, who would dare to ask your questions? In fact, this problem can be solved, you can learn from the book slowly!

The monitor is changed, you can change the monitor and see it.

Really professional, since it's so professional, I'll take two points.

I've had this problem before! It's mainly a graphics card issue! No matter what method is used, the graphics card must be made to work!

You can use the eraser to remove the gold finger, try a different graphics card, and I finally changed it! In my case, the system can't get in when the last step is started, and the screen goes black immediately.

This situation should be caused by the loss of power of the BIOS, after the loss of power, the BIOS is restored to factory settings, the BIOS battery is replaced, and the BIOS settings are reset. Now press del to take a closer look at what options are available?

If the computer can't get into the system, you should shut down the computer, and then update the software to enter later, and you will definitely be able to get in.

The first interface press Delete

to enter the motherboard settings to see if the hard disk information can be recognized, if not, you can press F9 to restore factory settings and then press F10 to save and exit.

Method Step 1 If it is stuck at the moment before entering the system, and the mouse cannot enter the circle, it is a problem with the system, and it is likely to be a driver conflict and a software conflict, so what should I do?

Boot the computer and keep clicking the F8 key to enter the system operation menu, select "Safe Mode", if you can enter it successfully, click "Start" "All Programs" "Accessories" "System Tools" "System Restore", the "System Restore dialog box" appears, and select "Restore my computer to an earlier time". In this way, you can use the built-in system restore function of the Windows system to restore to a restore point when the computer was able to boot normally.

The computer can't get into the system: restart it and try it.

Stuck in the welcome interface Many friends can't enter the system when the computer is turned on, and they are generally stuck in the welcome interface and keep turning in circles, forcing the computer to restart.

There are a lot of English** Boot can't enter the system black screen**, then most of the cases are caused by system damage, such as the main boot.

Preparation: An empty 8G USB flash drive, a computer with normal Internet access, and a reinstallation tool.

Open the reinstallation tool, turn off the computer antivirus, and plug in the USB flash drive.

First of all, let's see what the error report looks like?

The possibility of not being able to enter the system:

The system disk cannot be read or detected (change the system disk + reinstall the system), the system disk is fine, but the system file is abnormal (reinstall the system).

The hard disk self-test before entering the system fails (unplug all hard disks, plug in only the system disk to boot up, add the connected hard disks one by one, and check out the problem hard disks; or BIOS settings to skip HDD self-test).

Other hardware issues such as graphics card, memory, etc.

The BIOS battery is dead.

There are many reasons why the computer can't enter the system, it's best to find a professional to see, there may be software problems, you can reinstall the system, there may also be hardware problems, you need to replace the hardware.