Consult Permission Settings between all users5

Select Add a new user in My Computer-Control Panel-Users,After requiring you to enter a username and password, you also need to select a user group,If you choose administrator,Then this new user has the same permissions as the administrator,If you choose users,Then it's a normal user right,You can surf the Internet,You can also see your neighbors on the Internet,But you can't change the settings of the computer。 If you select guest permission, then you can only browse, and you don't even have the permission to read and write.

Use encryption software to set a password for each user!

As follows. Right-click on the file you want to set and select Security.

Then set access permissions: If you don't want anyone to access it, delete that user.

If it's NTFS format, it's very simple, open my computer, click on the tools column above, open the folder options, switch to the view column, and remove the tick in front of the "Use Simple Share (recommended)" column, so that there is an extra security option in the NTFS format partition and attributes. Add users in and you can set properties like "Full Control", "Read & Run". The folder point properties of the partition can be further set.

The one on the fourth floor is very clear, and that's it.

The FAT format is not allowed to set the permission function.

Hello dear! We'll be happy to answer for you. How to create a user with administrative privilegesA:

In the control panel, select Users & Groups - Users - Add, there are two ways to add users: 1. Select Create User - Set Account Password, next step; Create a user to set permissionsSet user groups (the first is the administrator's group, if the user does not give the administrator permissions, do not join the shuffle; The second is a default group that can be skipped; The third is the general user group, which will join the shuffle by default for all newly added users. The group can also be added by itself, the main role is to facilitate the management of multiple users with the same permission), create a user to set the permissions of the next step will be to set the permissions of the folder (there is no order between the shared folder and the user to create, you can set it up later), create a user to set the permissions The next step will be to set the space quota, which can be set according to the actual needs, create a user to set the permissions and then the next step, set the permissions of the application, create a user to set the permissions, and then set the access speed of the user.

Set it up and you're done.

1. In the computer first, right-click the folder that needs to be set, and select the properties to enter, as shown in the figure below.

2. Then click on Security in the properties, as shown in the figure below.

3. Then, in the security page that opens, click Advanced, as shown in the figure below.

4. Then in the page that opens, click Add below, as shown in the image below.

5. Then in the page opened by Cracked Hulu, click Find Now on the right, as shown in the figure below.

<>7. Now that you have the permission, click OK below.

The following describes how to set permissions for designated users:

Log in to the system as an administrator.

In "My Computer", right-click on a partition, select "Properties" - "Security", in the "Security" tab, you can add or delete the group or user to which the partition belongs, and you can select and set the permissions of a user after selecting it.

If you want to add a user, click "Add", click "Advanced" in the "Select User or Group" window, then click "Find Now", select a user in the list of user groups at the bottom of the window, and return to the "Security" tab after confirmation, at this time, you can see the "Group or User Name" column to see the added user report.

Once you have selected a user, click "Delete" to delete it. If you don't want to do too much, and for the convenience of logging in as a user, you can keep only the admin user and everyone user.

To keep a folder in a partition out of use by other users, do the same thing as above (just right-click on the object and replace it with a folder).

The first step is to create a standard user.

Win7 is very detailed in this aspect of account control, we can see different types of accounts to protect our computers, use administrator accounts for ourselves, and use standard users for others, so that the computer will not lose files due to operation errors.

1) Open the Control Panel - User Account Control Options.

2) If you have set up an administrator account, then you can directly create a standard user, if you don't even have an administrator user, it is recommended to create your own administrator account.

3) Click Manage Other Accounts - Add New Account - Standard Users.

4) Set a password for standard users.

Step to read. Step to read.

Step to read. Step to read.

Step to read. 2 The second step is to set the administrator permissions of the application.

We set some important software or folders as administrators, so that standard users need to be able to execute them under the administrator password, otherwise they can't do it.

1) Right-click on the app or shortcut and tap Properties.

2) After entering the properties interface, click Compatibility, and then click Run as administrator, OK.

Step to read. Step to read.

3. The third step is the highest authority of the administrator.

Although the account we use is the administrator, we still can't carry out some operations, such as some files in the C disk can not be changed, which will prompt us that we have no permissions, so this situation requires us to obtain the highest authority of the computer.

1) Select the folder for which you do not have permissions, and right-click to select Properties.

2) Go to the security interface and select Advanced Options.

Step to read. Step to read.

Step to read. 4 Fourth, change the permissions of the current administrator user.

Click the permission menu to enter the permission setting interface, and you will find that your user has only obtained the read and write permission.

1) Select the current user and click the Change Permissions button below to change the permissions.

2) Select the permissions you want to obtain and click OK.

Step to read. Step to read.

Step to read. 5 Step 5, Administrator System Permissions.

1) Right-click on the attributes, click on Security Options, select the administrator user you are using, and click the button to enter the interface.

2) Select the current user and change the following permissions.

Step to read. Step to read.

Step to read. Step to read.

Step to read.

Commands that are often used, take note of them.

Modify the group to which the file belongs.

Simple to use, change the group to gourp1

chgrp gourp1

Modify the owner of the file.

Change the user to user1

chown user1

The user and group to which you belong are modified at the same time.

chown user1:group1

Modify file properties.

chmod 755 test

chmod u+x test

chmod u-x test

chmod g+x test

Modify the group to which the user belongs.

Normally, just add the current user to another group.

usrmod -a -g group1 user1

Use if you want to completely change the group to which the user belongs.

usrmod -g group1 user1

To set up user permissions in Windows XP when multiple people share a computer, you can follow these steps: As a first step, run the Group Policer program (. In the second step, in the left pane of the widget window, go through the Computer Configuration, Windows Settings, Security Settings, Local Policies, and User Rights Assignment branches.

When multiple people share a computer, setting user permissions in Windows XP can be done by following these steps:

As a first step, run the Group Policer program (.

In the second step, in the left pane of the widget window, go through the Computer Configuration, Windows Settings, Security Settings, Local Policies, and User Rights Assignment branches.

The third step is to double-click the user permission that needs to be changed. Click Add, then double-click the user account to which you want to assign permissions, and click OK twice in the dialog box that appears.

Self-taught to sort out records, the great god smiled1.Use the family register to destroy the name of the household.

2.Password, x for encrypted password.

User ID. Group ID.

5.Full name or local of the user.

6.Home Zhaochong directory.

7.The shell used for login is the terminal command used after login, and ubuntu is dash by default

The three numbers correspond to each other, the owner of the permission, the group permission, and the other user permission.

1. Create a standard user. Open the Control Panel, click on User Account Control, click on Manage Other Accounts, select Add New Account, select Standard User, and set a password for Standard User.

2. Set the management authority of the application. Right-click on the application or shortcut, click on Properties, click on compatibility after entering the properties interface, and then click Run as administrator, OK.

3. The highest authority of the administrator. Select the folder that has not been granted the virtual access permission, right-click and select Properties, enter the security interface and select Advanced Options.

4. Change the permissions of the current administrator user. Select the current user, click the Change Permissions button below to change the permissions, check the permissions you want to obtain, and click OK.

5. Administrator system authority. After right-clicking on the attributes, click on the security option, select the administrator user you are using, click the button to enter the interface, select the current user, and change the following permissions.

To modify user permissions, you can follow these steps:

1.Log in to the computer as an administrator. Bending remains.

3.In the Control Panel, select User Accounts.

4.In the User Account window, click "Change Account Type".

5.In the Change Account Type window, you can see a list of users on the current computer.

6.Select the user you want to modify the permissions for, and then click "Change Account Type".

7.In the pop-up window, you can choose to change the user's account type to "Standard User", "Admin", or another type.

8.Select the appropriate account type as needed, and then click OK to save your changes.

Once the above steps are completed, the user's permissions will be modified accordingly. Note that to modify another user's permissions, you need to have administrator privileges or be already an administrator of the computer. And it is necessary to carefully modify the user's lead alarm permissions to avoid adverse effects on the normal operation of the computer.

The project is blind in the management of the gods; The project has been operated by the air of the tour; zoho；Item training with heading; projects；