Is drip irrigation a high yield for potatoes Is it better to plant potatoes with drip irrigation or

1.The use of large water flood irrigation can not penetrate, and the waste is large. Drip irrigation saves money and has strong penetration.

2. Drip irrigation technology can not only save fertilizer. It can also improve the utilization rate of fertilizers.

3. It can not only reduce labor intensity. It can also reduce the negative impact of manual work.

4. Reduce pests and diseases, inhibit weeds, and improve crop quality.

In summary: drip irrigation for potatoes can increase yields and income.

The yield is high, generally can reach more than 3000 tons of mu, commodity yield, the amount of sowing per mu is 240 kg, the number of harvested plants per mu is more than 6000, the equal row spacing is 80cm, and the plant spacing is 12-13cm.

Are you planting on a large scale? Now if you belong to a large area of planting or recommend you to use drip irrigation, now many companies plant potatoes are used sprinkler irrigation circles, is a bit of a waste of water, but it is trouble-free, and if you plant a large area, your field must be uneven, so if it is flood irrigation, there will be some places have been flooded, and some places have no water. Therefore, the sprinkler circle is very suitable for field planting.

If you haven't seen this before, I recommend you visit it. If you plant a small area, it is better to flood irrigation.

As for the yield, you can rest assured that it will not be affected.

Summary. Hello dear, it is a pleasure to serve you: is it better to put the drip irrigation belt on the top or in the ditch for potato planting:

Potatoes are planted in paddy fields in Sichuan District to form ridges, and potatoes are planted in ditches in mountainous areas to protect moisture. Potato irrigation methods include furrow irrigation, sprinkler irrigation and drip irrigation. (1) Furrow irrigation is an irrigation method commonly used in potato production.

Its advantage is that it has low input, does not wet the stems and leaves of the plant, and is conducive to preventing the occurrence of stem and leaf diseases. The disadvantage is that it requires more labor, and the water loss is serious, only 50%-70% of the water is effectively used by plants, which is easy to cause waterlogging and promote the spread of soil-borne diseases and rotten potatoes. (2) Sprinkler irrigation is a relatively modern irrigation method in which water is sprayed on the entire plant from above the crop, just like rain.

Its advantage is that it can be used on sloping or sandy land, can effectively control the amount of irrigation, irrigation is uniform, water utilization rate is high, and water can be saved. The disadvantage is that the water directly wets the stems and leaves of the plant, which may lead to the occurrence of bacterial diseases. (3) Drip irrigation is the use of pipeline facilities on the surface of the soil to directly irrigate the root system of plants.

It has the advantage of being able to use limited water resources and reducing soil erosion and evaporation. The disadvantage is that the facility is expensive, the cost is high, and it is easy to promote soil salinization. I wish you a happy life!

Hope mine is helpful to you ha.

Hello. Hello dear, it is a pleasure to serve you: is it better to put the drip irrigation belt on the top or in the ditch for potato planting:

Potatoes are planted in paddy fields in Sichuan District to form ridges, and potatoes are planted in ditches in mountainous areas to protect moisture. Potato irrigation methods include furrow irrigation, sprinkler irrigation and drip irrigation. (1) Furrow irrigation is an irrigation method commonly used in potato production.

Its advantage is that it has low input, does not wet the stems and leaves of the plant, and is conducive to preventing the occurrence of stem and leaf diseases. The disadvantage is that it requires more labor, and the water loss is serious, only 50%-70% of the water is effectively used by plants, which is easy to cause waterlogging and promote the spread of soil-borne diseases and rotten potatoes. (2) Sprinkler irrigation is a relatively modern irrigation method in which water is sprayed on the entire plant from above the crop, just like rain.

Its advantage is that it can be used on sloping or sandy land, which can effectively control the amount of irrigation, irrigate evenly, and have a high water utilization rate, which can save water sources. The disadvantage is that the water directly wets the stems and leaves of the plant, which may lead to the occurrence of bacterial diseases. (3) Dimo state irrigation is to directly irrigate the root system of plants on the surface of soil by using pipeline facilities.

It has the advantage of being able to use limited water resources and reducing soil erosion and evaporation. The disadvantage is that the facility is expensive, the cost is high, and it is easy to promote soil salinization. I wish you a happy life!

Hope mine is helpful to you ha.

Pro: Potato planting ditch is good. In general, drip irrigation and strip feeding are both techniques used in potato cultivation. Drip irrigation technology is to establish an irrigation system on the soil surface, and use irrigation drippers to control the amount of water to achieve a good grinding hall for plant moisture. The belt is to establish an irrigation system on the soil surface, set up irrigation belts, and form irrigation belts along the planted potatoes to achieve good plant moisture.

In terms of the actual planting effect, the ditch is better. Because the soil in the ditch is more fertile, and the soil temperature is more stable, it can provide a better planting environment, and because the irrigation amount in the ditch section is relatively large, it can provide the water required by the plants more effectively.

What to pay attention to in potato drip irrigation fertilization

1. Only use white and black liquid fertilizer, no organic fertilizer, no foliar fertilizer. 2.White manure and black manure should not be mixed in the manure bucket at the same time, and should be applied separately. Apply white fertilizer first, then black fertilizer. 60 kg of fertilizer per barrel. 3.Fat.

1.Only use white and black liquid fertilizer, no organic fertilizer, no foliar fertilizer.

2.White manure and black manure should not be mixed in the manure bucket at the same time, and should be applied separately. Apply white fertilizer first, then black fertilizer. 60 kg of fertilizer per barrel.

3.Fertilizer should be dissolved in the fertilizer bucket to mix with water more than 10 times, do not pour all fertilizer into the fertilizer bucket at the same time, pour while dissolving.

4.When the soil is dry, the fertilization time is completed within one to two hours. Drip irrigation for 10 minutes to fill the pipe with water and then start fertilization, continue to drip water for 20 minutes after fertilization, and discharge all the fertilizer liquid in the pipeline, otherwise moss may grow at the dripper and block the dripper.

5.Fertilization is carried out as usual when the soil is not short of water or when it rains continuously. First drop 10 minutes of water, start fertilization, fertilization time should be controlled within 20-30 minutes, no need to drip water after fertilization is completed.

6.The root system of potatoes is mainly distributed about 25 cm below the soil layer. Drip irrigation mainly moistens the root layer, so check the moisture status around the root system frequently.

Dig up the soil around the root system and pinch the soil by hand, which can be pinched into a lump to indicate that the water is enough, if it is not pinched into a lump indicating that there is not enough water, it is necessary to start drip irrigation vertically. Generally, the drip irrigation time is small, and it is better to take a small amount many times until the remaining broad layer of the root system is moist. Each dripper dispenses 1 kg of water per hour.

7.It is very important to grasp the fertilization time, if the fertilization time is too long, the fertilizer will be leached under the root layer and cannot be absorbed, resulting in fertilizer waste and reduced yield.

Drip irrigation at the potato seedling stage is used to --- multiple roots with organic fungus fertilizer of Huaao United, which can strengthen the seedlings well. In the underground rhizome swelling period, it is drip irrigated with Huaao special help high potassium water-soluble fertilizer of Huaao United Beijing Company.

Drip irrigation pipe drip irrigation system is an important irrigation product in the drip irrigation system, which is in accordance with the water requirements of crops, through the low-pressure pipe network and the irrigation device (drip irrigation pipe dripper) installed on the capillary pipe, the water and nutrients required by the crops drop by drop, evenly and slowly drip into the soil of the root of the crop, avoiding the leakage, volatilization and waste in the process of water and fertilizer transportation, which can save water and fertilizer and reduce costs to the greatest extent.

Drip irrigation belts are divided into patch drip irrigation belts and labyrinth drip irrigation belts.

Labyrinth-like features.

1. The labyrinth runner and drip hole are formed by vacuum as a whole, with good adhesion and high manufacturing precision.

2. Multi-port water outlet in turbulent flow state, strong anti-clogging ability.

3. The design of the labyrinth runner can achieve uniform water output, up to more than 85%, and the laying can reach 80m

4. Light weight, convenient installation management, low manual installation cost.

SMD features.

1. The built-in dripper comes with a filter window, which has good anti-blocking performance.

2. Turbulent flow channel design. Irrigate evenly.

3. The dripper and pipeline are integral, 4. The dripper spacing is flexibly adjusted, and the application range is wide.

5. Low price.

You can take a look at our drip irrigation tape and drip irrigation pipe in Hebei Runtian, which is cheap, economical and practical compared to other brand products of the same kind on the market. All kinds of products produced by our company can meet the actual needs of different users, and on the basis of science and reason, with the best products and the lowest cost, we can build the best and most effective water-saving irrigation system.

The cost of drip irrigation pipe is relatively high, and drip irrigation belt can be used, which is easy to use and low cost.