There are many kinds of heating equipment, how to choose the heating method scientifically?

In winter, all kinds of heating equipment in the home are indispensable. Today, let's learn about the history of home heating and how to choose the most suitable one among various heating methods. Classification and purchase of heating equipment.

1. A brief history of the development of home heating In the face of the cold winter, people have been constantly seeking a better way to heat the problem. With the development of science and technology, various heating methods have been invented and replaced. Far from mentioning, let's take a look at the development and changes of home heating in the past few decades.

Traditional heating method 1, firewood heating Human beings have mastered the skills of drilling wood for fire heating a long time ago. This method of making fire is now long gone, except in the wild, and may still be used in the wild. However, the use of firewood for heating continues to this day, and although it is rare in urban residential buildings, it brings warmth to many people in underdeveloped rural areas.

However, this way of directly using firewood for heating is relatively backward, and a large amount of firewood needs to be used, which is a potential safety hazard, and is neither convenient nor environmentally friendly.

2. Charcoal fire for heating When I was a child, the most vivid picture in my memory is that the family is sitting in front of the charcoal brazier while sipping melon seeds and chatting, which feels very warm. As the name suggests, charcoal is burned in a charcoal brazier, and charcoal is fired with firewood, which is an upgraded version of firewood heating. This method also requires a large amount of firewood, the resource utilization rate is not high, and there are potential safety hazards, which are easy to cause fires.

3. Honeycomb coal for heating honeycomb coal is a honeycomb cylindrical briquette made of a fixed mold after being stirred evenly with pulverized coal, loess, water, etc. in an appropriate proportion. Honeycomb coal has the advantages of easy use, simple production and low cost, but when it is used for heating, the taste is more pungent and there is a large oneCarbon monoxide poisoning is a hidden danger, so it is relatively rare in modern homes.

Central heating When the traditional heating method is still widely used in the southern region, in the 70s of the last century, radiators have begun to enter the northern buildings. Central heating is the most common heating method in the north until now, it breaks the original single family heating mode, through the centralized heating boiler, the installation of heating pipeline system to achieve heating, with the advantages of safety, peace of mind, and low pollution.

Although the cold period of winter in the south is not as long as that in the north, the damp and cold is also very unbearable. Due to historical and geographical reasons, central heating has not been realized in the south. At present, the south mainly adopts the household heating method, which is diverse, mainly using heating products including air conditioners, wall-hung boilers, floor heating, electric heaters and so on.

Second, the advantages and disadvantages of central heating If there is something in the north that makes southerners envious, it is likely that the first place is central heating. Some people say that northerners eat popsicles when they are hot in winter, while southerners can only shiver when they are cold in winter. In recent years, the winters in the south have been particularly cold, so there are many voices calling for central heating in the south.

But is central heating really that good? Can the south really transplant the central heating method of the north directly? Let's take a closer look at central heating.

The current heating methods will have heating in the north and air conditioning in the south, which are relatively safe.

You can distinguish what style people have installed, and refer to other people's homes.

The scientific selection is to see that your own funds are abundant, and you must choose good materials.

Generally, the most used is heating floor heating, which is very convenient to use.

When buying, you should see if there is a factory mark, and then put water to test whether there is water leakage.

First of all, it must have a good effect, and it can be suitable for your own home.

First of all, you must buy it in a regular place to see your budget.

Depending on your budget, if you have money, you can buy a good brand that can be used.

When buying, you should see if there is a factory mark, including the execution number, and then put the water to detect whether there is a water leak.

The form of heating is bottom-up, in line with the physiological requirements of the human body, and is welcomed by many people, but the disadvantage of earth heating is that it must be carried out at the same time as the decoration of the house. There won't be trouble. It is installed under the floor.

If the floor is decorated, only pry the floor open, and do not set radiators in the house.

This radiator is environmentally friendly, energy-saving, and at least 10 times better. At present, many homes use heating tools such as wall-mounted heating stoves, which can be installed at any time and do not need to be completed before laying the floor like a kang. This kind of wall-hung heating stove is divided into gas wall-mounted heating stove and electric heating wall heating stove according to the power source.

Although it is called a water heater, it is fundamentally different from a traditional water heater. Not only can you use a water heater, but you can also heat your room. This type of heating has a heating function.

Like the air conditioner, each room can be heated, one room is heated individually, and one room provides a lot of warm water, which can be used at home. Gas wall heating stoves are convenient and flexible. That is to say, the heat is fast, and the heating temperature can be adjusted separately in each room, and the heating time and usage can also be adjusted independently, but it is more expensive, the follow-up maintenance cost is high, the noise is high, and the safety risk caused by insufficient gas combustion.

and environmental pollution.

Because that switch is controlled by the home. Moreover, global warming.

The temperature is more comfortable and heated.

Faster,** cheaper than collective heating. But setting up global warming has requirements for the house. Installing global warming takes up about 8 centimeters of floors, and if it is a second renovation, it may damage the cables that are already buried in the floor.

And the ground can not choose wood flooring, floor tile safety factor.

Higher. **About 14 yuan per square meter, temperature about 18. There are two options for global warming, one is water heating and the other is electric heating.

The advantage of water temperature heating is that it can not only provide domestic water, but also heating, and the installation technology is relatively mature. Of course, the fees are also high. Because it is necessary to install a wall-hung boiler.

Diversity and other accessories. But fortunately, the service life is long, and the cost performance has improved. Only one thermostat is required for electrically heated installations, and little to no service or maintenance is required. However, due to the high electricity consumption, the residential complex should be considered before installation.

whether the electricity consumption will exceed the standard.

The bathroom needs to be waterproof, so it is not convenient to lay it out. If you don't have a bath bomb or have a large bathroom, it can be cold to take a shower. It is also the way to lay it under a wall or floor with electric heating.

It has the characteristics of adjustable temperature, long life, no maintenance, environmental protection and so on. Moreover, there is no heater when installed, which does not take up space. But the temperature rises more slowly, so it reaches 18 degrees Celsius.

The heating takes hours. Do not drill holes or nail nails at the top.

It is also not suitable for residential areas with unstable power and too high costs. For example, if you have a 100-square-meter apartment, you will be charged about 2,100 won for a quarter for 8 hours.

There are many ways to heat indoors, such as floor heating: air conditioners, small suns, electric radiators, heaters, etc. I think the most environmentally friendly of them should be electric radiators, which only need to be plugged in to heat the room, while freon produced by air conditioners will destroy the ozone layer, and small sun and heaters will cause fires if they are not used properly.

There can be floor heating and plumbing, heating is more environmentally friendly, HVAC is a new concept in the heating market, more energy-saving and environmentally friendly than the traditional air conditioning fire, can effectively save energy.

The more economical and environmentally friendly is floor heating, and such heating equipment is also relatively balanced, and the charging standard is also more affordable.

I think you can choose some relatively small heating appliances, which can save space, in addition, you must choose a big-name manufacturer, so that it is not easy to have fire hazards.

The common heating appliances on the market include electric heaters and hand warmers, and we should choose some with relatively small power and relatively large heating rate.

The common heating appliances on the market include small sun and heaters, and we should choose some with high safety factors and durability when choosing.

Nowadays, there are many household heating equipment in home decorations, which makes people pick and choose, and they don't know which heating equipment to choose. In fact, each household heating equipment has its own advantages and disadvantages, friends can choose according to their own situation when choosing.

Radiator is a kind of household heating equipment that is often found in northern families. The heating performance of this household heating equipment is good, and it can keep the home warm for a long time in winter, and most of the heating tablets are collective heating, which can save resources and be cheap. However, radiators need to be installed in every bedroom, and if the room is large, many sets of radiators need to be installed.

The pipes of the radiators are made of iron or aluminum, and the pipes are easy to rust and clog after a long time.

Now there is a household heating device on the market that uses solar energy for heating. This kind of household heating equipment is very novel and energy-saving, green and environmentally friendly, and is liked by many people. However, because this heating device mainly uses solar energy, the temperature in the home may not reach the usual state when it is cloudy.

Some people think that the installation of radiators at home is very space-occupying, and it affects the aesthetics of the entire home decoration early. Underfloor heating is to install heating pipes under the ground, first dissipate heat to the ground, and then raise the temperature of the whole home. Floor heating kang is also very popular, like the ondol in the countryside, but it does not need raw wood to burn the fire.

Installation of floor heating If the home is covered with wooden floors, the requirements for wooden floors are very high, and the kind of wood floors with high heat resistance should be installed, otherwise it is easy to deform and warp the floor.

If the home is decorated in a European style, for the sake of style consistency, the home heating equipment can use a European-style fireplace. The heating performance of this fireplace is good, there are smokeless charcoal, and there are also plugged in. However, this European-style fireplace is generally more expensive, and the energy consumed in the process of use is more, and the choice of this kind of household heating equipment requires a certain economic strength.

There are many types of electric heaters, which are roughly divided into the following types: small sun, electric oil tin, convection type and electric heating film electric heater.

1. The first category: small sun and halogen tube heaters.

The small solar heater relies on the radiation element and the reflection device to emit far infrared rays to heat, and the halogen tube is a sealed light-emitting heating tube, which is filled with halogen element inert gas and has tungsten filament in the middle, which is mainly luminous heating.

Small solar and halogen tube heaters are characterized by small size, lightweight, low relative power, faster heating, and the price is cheaper than other types of heaters.

2. The second category: electric oil heaters.

It is to install the electric heating pipe under a cavity with many heat sinks, and the heat transfer oil is injected around the electric heating pipe in the cavity. When the power is connected, the heat transfer oil around the electric heating pipe is heated, rises to the upper part of the cavity, circulates along the convection of the heat pipe or heat sink, and radiates the heat out through the surface of the cavity wall, thereby heating the space environment.

This kind of heater heats up slowly, the body is bulky, but relatively safe, hygienic, the design of the electric oil tint is similar to the water radiator in the north, it is a heater product with a good overall heating effect, and the demand is relatively large in the northern provinces. Due to the complex workmanship, high process requirements and wide effective heating area, the electric oil tin is relatively high.

3.The third category: European-style convection fast-heating furnace heater European-style fast-heating stove heater is referred to as "European fast".

It is a European-style heater that has become popular recently. The air around the electric heating pipe is heated up and flows out of the air outlet after the power is turned on, and the surrounding cold air enters the air inlet to supplement and heat.

This type of heater is characterized by a slim body design, fast heating, and multi-purpose wall bath.

4. The fourth category: fan heater heater heater.

It is to use the motor to drive the fan blade to rotate to produce air circulation, and the cold air passes through the heating element and electric heating element to form a heat exchange to achieve the purpose of heating up. It is equipped with a thermostat inside, and when the tuyere is blocked by the fan, it can turn off the power by itself. Some are also equipped with a tilt switch, which can also cut off the power when the heater is tipping over.