Why does it feel like the computer is not as good as it used to be?

What you want to talk about should be the aging of the computer, and the problem of game updates.

Just like World of Warcraft, it was true that 512 was able at that time, but the current World of Warcraft 512 memory is definitely not enough. As soon as you enter the main city, you will definitely not be stuck.

Sometimes, overclocking can also affect your computer's performance. It feels good after overclocking, but once you overclock too hard, it is easy to cause irreversible problems. Unless it's a replacement part.

Then there is the problem of the operating system. When World of Warcraft just came out,Some Internet cafes are still using win98.,Now,The most secondary is XP.,Or SP3 version.,Win7 and Vista.,The compliance brought to the computer is also high.。

The computer has been used for a long time, and there is dust on the hard disk or graphics card and memory, which will affect the speed of the computer The quality of the graphics card is very important for playing games, and it is a very important factor that affects the speed of the game.

The computer has been on the computer for a long time, and you have more things installed, and it will also get stuck. Sometimes the deletion of the software is not complete, redundant information, junk files will appear, which will also affect the speed. So the maintenance of the computer is very important.

Just reinstall a system! Install another freezing point software, and it's the same as an Internet café, and it will be restored every time!

First take a look at the hardware to see if there is any problem with heat dissipation and clean up the dust in the case.

Then use Optimizer to clean up the junk files, too many junk files will also cause a crash after a long time.

And then it's a poison kill.

There's time to defragment the disk again! Basically, the problem is solved! !

Check whether it's poisoned first.,If not, then see if the hardware is broken.,Then there is no problem to clean up the Harbin system.,Or reinstall the system to see!

It may be infected with a virus, check it with antivirus software.

There is more and more garbage in the system.

The system is not good. Or poisoning. It is recommended to use win7 system.

Problem analysis: The computer automatically enters the CMOS interface of the motherboard when it is turned on, if you rule out human error to enter (you can press the ESC key to exit), it means that the computer fails to pass the self-test when it is powered on, which is generally a CMOS parameter error or hardware failure. Common phenomena include battery failure, misconfiguration, poor memory or hard disk contact, etc., which need to be investigated one by one.

Solution: 1. Battery failure: cause the computer to call the default parameters of CMOS, if it is inconsistent with the local hardware environment, the computer cannot be started normally.

You can purchase a motherboard battery to replace it, then turn on the computer and press the DEL button (F2 or other designated hotkeys for notebooks) to enter the CMOS interface, and reset the correct parameters, and finally press F10 to save and exit the reboot.

2. Configuration error: This situation will also occur due to the manual configuration of CMOS parameters that do not match the local hardware environment. In general, you can press the F1 key to skip the non-fatal error and start the computer directly according to the prompt message on the black background and white text on the screen, or press the del key to enter the CMOS, then press F9 to load the predefined parameters or select Load optimized defaults or load fail-safe defaults, and then press F10 to save and exit the restart.

3. Hardware failure: If the above operations are invalid, it means that there is a problem with the hardware, generally because the memory and the hard disk are in poor contact or the hard disk master boot record is damaged, and the memory or hard disk needs to be reinserted and unplugged, or the hard disk master boot record is repaired or the system is reinstalled or the hard disk is replaced.

You're BIOS, just quit and go! Press F10 to exit, and you will be prompted yes or no