What is the difference between a mixing plant and a mixing building?

Stirring function (1) Place the rubber sealing ring on the edge of the blade device; (2) Rotate the blade device in the direction of the arrow and connect it to the mixing cup; (3) Put the mixing cup on the motor device, rotate it in the direction of the arrow, and make it secure; (4) Put the ingredients into the mixing cup (the temperature of the ingredients should be lower than 80) 5) Press the lid into the correct position; (6) Put the plug into the lid and add the ingredients to the mouth, rotate it until it is firmly installed, in order to avoid spillage, the plug should be inserted into the lid before starting to stir; (7) Insert the power plug into the socket; (8) Select the desired speed setting and start stirring; (9) To stop stirring, turn the switch to position 0, and do not turn the blender on or off by turning the blending cup. Want to know....

The good thing about Sany is that it's a bit expensive.

If you want to build a temporary engineering station, just buy a miscellaneous one.

If you want to build a permanent commercial mixing station, I think it's better to buy Sany, Zoomlion's is a little worse, but it's cheaper, and the service is not as good as it is, after all, it's a service of a state-owned enterprise, so don't think about it.

It's all about the same, these things will have more or less problems in the later stage, it depends on which service keeps up, Zoomlion is good, and the after-sales service is very good.

Fangyuan's is just a bit expensive.

The concrete batching plant is composed of five major systems, such as material supply system, metering system, mixing system, electrical control system, etc. The mixing building is relatively simple.

Secondly, the batching machine of the concrete batching plant is on land, and the aggregate is conveyed to the mixer through the belt conveying or the upper hopper after metering, which covers a large area. The batching bin of the mixing building is above the mixer, in the form of the building, and the aggregate directly enters the mixer after measurement, which occupies a small area and saves a large part of the site resources. Generally speaking, it is called a building if the aggregate is lifted once, and the station is called when the aggregate is lifted twice.

Because the aggregate bin of the mixing building is on it, the steel structure will be relatively large, and the inclined belt will be relatively long. But in terms of productivity, the productivity of the mixing plant is about one-fifth higher than that of the mixing plant. In the daily operation, the inclined belt of the mixing plant is started more frequently, so the energy consumption and failure rate will be relatively increased, while the energy consumption and failure rate of the mixing plant are relatively low.

Due to the small production capacity of the mixing plant, the combined structure is adopted, and it is more convenient to disassemble, install and transfer the site, which is often suitable for construction sites; The mixing building has a large volume and high productivity, and can only be used as a stationary mixing device, which is suitable for large-scale water conservancy projects or commercial concrete with large output.

Therefore, when users distinguish between concrete batching plant and concrete batching building, they can choose suitable equipment from several aspects such as the number of lifting times of aggregate, production efficiency, and floor space.

The mixing plant and the mixing building are used to produce concrete batching plant equipment, the feeding and metering methods are different, the aggregate bin of the mixing plant is under the main engine, the aggregate needs to be transported to the mixing host through the belt conveyor after measurement, the batching machine of the mixing building is installed on it, the aggregate directly enters the mixing host after measurement, no secondary conveying is required, the link is reduced, and the aggregate is vertically metered, the measurement time is saved, and the production efficiency is improved. With the same size of the main machine, the production efficiency of the mixing plant is higher than that of the mixing plant.

The batching plant is mainly used for concrete construction projects, and the main purpose is to mix mixed concrete, also called concrete mixing plant. As the name suggests, a single station is a mixing host for each mixing station, a double machine station has two mixing hosts, and a multi-station group is more than two mixing hosts, and each mixing host corresponds to a discharge port, so the multi-station group and the double-machine mixing plant are more than 2 times the production capacity of the single-machine mixing plant.

The mixing building, also known as the concrete mixing building, is mainly used in the construction of concrete machinery projects such as concrete mixing. The concrete mixing plant is mainly composed of five major systems, including the mixing host, the material weighing system, the material conveying system, the material storage system and the control system, and other ancillary facilities.

There are many concrete batching plant equipment manufacturers in Henan, as for which one is the best, there is no way to say. The mixing plants are actually similar, but the materials and parameters may be different. The most important thing to buy a concrete batching plant is the output and service life, as well as whether the parts are common, and whether they can be bought nearby in time if damaged.

Concrete batching plant is generally customized according to the needs of users of super large construction machinery, the general design service life of 10 years, the use of maintenance spare parts involves a large number of after-sales service, is a product that can not leave the service, therefore:

Enterprises should have sufficient brand to ensure product design capabilities, as well as stable and reliable product quality;

Advanced technology, energy saving, environmental protection, good operability and easy management;

The enterprise is stable and has the ability to provide technical training, technical support and long-term service.

Enterprises and mixing plants with the above three points are excellent and can be selected as partners.

Commercial concrete batching plant manufacturers, of course, have to choose high-quality concrete batching plant equipment manufacturers.

First, the advantages. Small and medium-sized concrete batching plant is an economical batching plant, usually built in smaller areas at the township and county level, it is much simpler to install than large-scale batching plant, in addition to the small footprint, transportation is also more convenient.

Second, the model. The models of small and medium-sized batching plants are now more and more with the research and development of manufacturers, 25, 35, 50, 60, 75 and so on are on the market one after another, among which 75 concrete batching plant is the most prominent among all small and medium-sized batching plants, and its simplicity and construction technology have played a great role in promoting construction projects.

3. 75 mixing plant.

The 75 batching plant is a small and medium-sized concrete batching plant, but it is much easier to install and operate than a large batching plant, and the use of the 75 batching plant greatly improves the construction speed of small projects. Coupled with the transportation of concrete pump trucks, fast construction can be easily realized.

Fourth, composition. The 75 engineering concrete batching plant produced by Shandong Jinrui Heavy Industry Co., Ltd. is a fully automatic concrete mixing equipment composed of batching, mixing, electrical control system and other parts, and is equipped with separate manual control, automatic compensation of drop and compensation of sand and gravel moisture content, which can automatically complete the scheduled tank production. The theoretical productivity is 75 cubic hours, the discharge height is meters, the storage hopper volume is 8 cubic meters * 3 bins or 4 bins, and the supporting host is JS1500 compulsory twin-shaft mixer.

5. Features. HZS75 concrete batching plant has a small amount of investment funds, occupies a small site, uses less equipment, and is easy to maintain, and can be equipped with a high-performance independent control room, so that the equipment is convenient and safe to operate, and can also produce high-quality and efficient concrete under the condition of accurate metering of the batching machine. This type of plant also adopts a green design under our active research, and the possible pollution caused during construction is controlled, which is naturally a sure victory compared to the pollution caused by the old construction and transportation methods.

<>The concrete batching plant equipment produced by our family is very good, the models are more comprehensive, and the quality is also guaranteed.

The mixing plant is mainly used for concrete engineering, and the main purpose is to mix mixed concrete, also called concrete mixing plant. HZS series commercial concrete batching plant adopts the internationally popular modular rapid assembly structure, high-performance imported or domestic mixing host.

It is a new generation of cement concrete mixing equipment, which is suitable for large-scale infrastructure construction projects such as commercial ready-mixed concrete in urban and rural towns, roads and bridges, water conservancy, airports, ports and places with large concrete demand.

Concrete batching plant equipment company: Zhengzhou Tonghui Machinery Equipment, Zhengzhou Baoji Machinery Equipment, Yunnan Shengnuo Machinery Equipment, Henan Jiangyi Mechanical and Electrical Equipment, Fujian Quanzhu Machinery.

Zhengzhou Tonghui Machinery and Equipment****:The registered address is located in the east of the 5th floor, unit 4, No. 69 Xin'an East Road, Shang District, Zhengzhou City, the registration authority is the Market Supervision and Administration Bureau of Shang Block, Zhengzhou City, and the legal representative is Wang Rui, whose business scope includes sales: mechanical equipment and accessories, mechanical and electrical products, valves, electrical equipment, electronic products, instrumentation, industrial automation equipment; Rental of machinery and equipment.

Zhengzhou Baoji Machinery and Equipment****:The registered address is located at No. 36, Group 2, Xushui Village, Xushui Street, Zhongyuan District, Zhengzhou City, the registered authority is the Market Supervision and Administration Bureau of Zhongyuan District, Zhengzhou City, and the legal representative is Xue Xiaoli. wires and cables; mechanical and electrical equipment installation and maintenance services; Mechatronics equipment and accessories.

Yunnan Shengnuo Machinery and Equipment****:The registered address is located at No. 1-1, Building 10, No. 13, Wujing Road, Guandu District, Kunming City, Yunnan Province, the registration authority is the Market Supervision and Administration Bureau of Guandu District, and the legal representative is Fan Minghui, and the business scope includes the sales of ordinary machinery and equipment and accessories, mining equipment, energy conservation and environmental protection equipment; Import and export of goods and technology (except for items restricted by the state).

Henan Jiangyi mechanical and electrical equipment ****:The registered address is located in Room 1312, Unit 1, Building 33, No. 55 Center Road, Shangjie District, Zhengzhou City, Henan Province, the registration authority is Zhengzhou Shangjie Market Supervision and Administration Bureau, and the legal representative is Pan Xiao, and the business scope includes sales: mechanical and electrical equipment and accessories, mechanical equipment, lifting equipment, construction machinery and equipment, instrumentation, amusement equipment, building materials, and Wujinjiaodian.

Fujian Quanzhu Machinery ****:The registered address is located at No. 131, Dongxi Industrial Road, Hongse Town, Nan'an City, Quanzhou City, Fujian Province, the registration authority is the Market Supervision and Administration Bureau of Nan'an City, Fujian Province, and the legal representative is Xie Anbao, whose business scope includes the production and sales of road machinery equipment and accessories.

For projects subject to approval in accordance with the law, business activities can only be carried out after approval by relevant departments).

The investment in the mixing plant needs to be about 5 million.

Take 60 mixing plant as an example, 55 square meters per hour, 8 hours a day, 300 days a year, a day of output of 55 * 8 = 440 square meters, a year of output of 440 * 300 = 132,000 square meters, each square of concrete is calculated 200 yuan (this ** is only an operation, according to the local **), 132,000 * 200 = 26,400,000 yuan. Excluding the cost of raw materials, mixing plant, workers' wages, etc., according to 30% of the profit, 30% * 26400000 = 792,000 yuan, that is, a profit of nearly 800,000 yuan a year.

Precautions for the use of concrete batching plant:

1. Before starting the concrete mixer, check whether the controllers are in good condition.

2. The concrete mixer must be cleaned after use, especially in winter, there must be no foreign matter in the drum before use, so as to prolong the service life of the liquid.

3. The concrete mixer should be placed in a solid place, and it should be stabilized with a bracket or a foot tube, and it should not be supported by a wide range of dust tires.

4. When the concrete mixer is running, it is strictly forbidden to put the tool into the drum, and it is necessary to pay more attention to safety.

5. When the feed hopper of the coagulation Shenzen soil mixer is raised, for safety, it is strictly forbidden for personnel to pass or stay under the hopper, and the mixer hopper is fixed after the work is completed. <>