What is the density of the AO Smith PF25C1 prefilter?

Water filtration equipment in the current market occupies a larger and larger proportion, due to people's concern about the quality of water is getting higher and higher, filtration equipment is divided into different types and filtration methods according to different stages, AO Smith pre-filter belongs to a kind of pre-filtration, the following we will mainly introduce AO Smith pre-filter.

Smith was founded in the United States in 1874 and has a history of 141 years. Entered China in 98 years, with a global R&D center, the products cover electric gas air energy solar water heaters, household commercial water purification, air purifiers, home heating wall-hung boilers, commercial water heaters and boilers.

Principle: It is a thin specific plastic lamination with a large number of micron-sized grooves engraved on both sides, and a series of laminated pressures of the same pattern cross the grooves between the laminates through the elastic spring and liquid pressure on the specially designed inner support, thus forming a series of filter units of about 100 microns. During filtration, the water passes through the lamination from the outside, and the filtered lamination is tightly pressed together under the action of the hydraulic force of the spring, and the impurity particles are trapped at the intersection of the lamination, and the filtered water flows out of the filter.

Principle: Most of them use 50-100um stainless steel filter screen, through the pressure water of tap water from the inner wall of the pipeline to the outer wall, such as sediment, rust, bloodworm and other impurities are intercepted by the membrane hole, open the flushing valve to fill the stainless steel membrane The impurities intercepted by the water are washed away, and the flushing of the filter element is realized. Cons :

If the water quality is poor, or the consumer's habits are not good, the filter element is easy to be blocked, not only the smaller impurities can not be flushed out, but embedded in the filter element deeper, tighter, easy to become secondary pollution, can only open the shell to take the filter element out and brush with a toothbrush.

Filter sediment, rust, large particulate matter from tap water. Prevent a large number of precipitated impurities generated in the water supply network of cities and communities from causing harm to the human body, and play a positive pre-protection role in concealing pipes, faucets, plumbing, water heaters, boilers, air conditioners, washing machines, dishwashers, coffee machines and other water appliances (water purifiers, water purifiers, water softeners). The pre-filter is the nemesis of the secondary pollution of the water supply network, so that the water quality of the household is restored to the factory standard of tap water, and it is a reliable impurity filtration device, the first water purification gatekeeper in your home.

Remove visible solid impurities in the pipes, mainly rust, sediment, algae, colloids, etc., and play a positive role in protecting floor heating pipes, household faucets, electrical appliances, etc.

I don't know if I get this filter, if you don't use it well, of course it's okay, and then I use beige for this, and we're together, and the self-discipline in his pre-process is different from other degrees, and what about later? I think the density of Io Smith is very good, so.

Oops, the Smith Ti25cc pre-filter rate should be at 15 mesh.

As for the density of the pre-filter, this can only be calculated by calculation, or he will generally have official data on the official website, and then you can see what its official data is.

The density of this pre-filter can only be answered by asking the sales staff or the after-sales personnel of the brand, because this knowledge is too professional.

It depends on the specific situation, under normal circumstances, its filtration density should be within the normal range of 80% to 50%.

What is the density of the Smiths DF 25C1 prefilter? I think the density of AO Smith PF 25C transition gas is about that.

The density of the pre-filter is three points one.

The previous initial password was 4 6s or 4 8s, you can try again yourself.

There must be a reference to what the density of the fourth potential excess filter is, and the comparison parameter is generally between 100 and 200.

It will not be affected, generally there is a precision of 60 100 150 microns in the front, and the amount of water is relatively large, about 5 tons per hour.

What is the difference between HP Ten and HP Zero One Pre Filters? They don't have the same density and different types.

The difference between HP zero and HP0 pre-filters is that there is a difference in the thickness of some of the holes from its filtration.

Don't go to the p zero and hp0 pre-filter is the difference or the difference is still better not to go to the unit zero, because its function is better.

What is the difference between this pinyin and the most pinyin, zero and the most pinyin, and the number of zeros, one before the measurement of the virtual machine, you can ask the expert or you give the after-sales service ** to know what the difference is.

Dyson Technologies**** is a British international company specializing in the production and research and development of home appliances, the first of its kind in the world"Bladeless fan"products, and has applied for patents for inventions and utility models in China and other countries.

Okay, so there's functionality or some differences between the two, and the rest isn't too much of a problem?

My wallpaper and SP pre-filter,You pay more attention to this information on the Internet.。

HP10 and HP01 pre-filter, I don't think there is much difference, just the model is different.

The details are as follows: 1. Company information Dyson's company has become an international home appliance design and manufacturing company, and its products are sold in 37 countries around the world. by 1,200 scientists and workers.

Have a lot of dirty stuff as soon as the faucet at home is turned on? Did you forget to install a pre-filter when you renovated your home? Maybe many friends don't know what a pre-filter is.

What is the use of it, in fact, the pre-filter is like installing a safety guard in front of the water inlet of your house, what sediment, rust, and some messy algae can be blocked out of your water pipe, spend a few hundred yuan to have one more helper to remove impurities from the tap water, do you say? At present, the mainstream pre-filter on the market has an hourly water output of about 3 tons, and the accuracy is about 40 microns, many people may have no concept of this data, let's talk about the water output first, the general household kitchen water, the water output of the faucet is about 5 to 8 liters per minute, the shower used for bathing is about 8 to 10 liters per minute, and the water output of 3 tons per hour can basically be used by three faucets at the same time, that is to say, you are completely fine with washing clothes in the washing machine while taking a bath. The concept of 40 microns is better understood, the diameter of a hair is about 60 to 90 microns, that is to say, the pre-filter can filter out impurities half the size of the hair, isn't it very effective?

Of course, the pre-filter is best installed together during hydropower construction, otherwise it will be very troublesome to install it later, and like all filtration devices, the pre-filter also needs to be opened regularly to clean the filter screen, otherwise the water output will become smaller in the later stage, and the water quality will also be affected.

Water purifier pre-filtration? Choose products with patented technology.

At present, from the perspective of the best situation on the market, many pre-filters are flushed directly or flushed, in fact, no matter which one, the flushing is not very clean, and it is easy to leave a lot of granular things, which will have a negative impact on the normal use in the future, so in the case of unclean cleaning, the pre-filter needs to be removed, and then used a soft brush to clean up, which is more troublesome. The equipment with patented technology is different, each time it is cleaned, not only the time is relatively short, but also more thorough, do not worry about blocking the filter hole, and now the backwash pre-technology is more advanced, which can avoid the appearance of secondary pollution.

Water purifier pre-filtration? Choose products with high precision.

The precision of the pre-filter needs to be checked, and now with the continuous advancement of technology, the degree of accuracy is constantly improving, and for those tiny particles, it can also be rinsed clean. However, this kind of equipment is often for the initial purification of water, and in order to achieve better water quality effects, it is necessary to install other water purification equipment. Water purification is often better when two or more devices are used together.

Water purifier pre-filtration? Pay attention to choose cost-effective products.

Judging from the current situation of the pre-filter in the market, it varies from a few hundred yuan to several thousand yuan, which is mainly related to the brand, and is also closely related to the functional characteristics of the product. Naturally, it is different, and the quality of the product is also different. However, now this kind of product has become more popular, and it is more transparent, and users can buy good products for thousands of yuan when they choose.

Water purifier pre-filtration? Solve the secondary pollution of pipelines.

The city's water supply pipes are old and long, and impurities such as rust and sediment in the pipes will not only cause brown water and water equipment control failure. The filtration accuracy of the pre-filter is 5-100 microns, which can filter impurities such as sediment, rust, floating objects and other impurities visible to the naked eye, which greatly prolongs the service life of the follow-up equipment. The pre-filter is generally installed behind the water meter, and its main function is to restore the tap water to the standard before leaving the factory and protect the downstream equipment.

Water purifier pre-filtration? Soften water quality, stop scale, and prevent corrosion.

Scale is no stranger to all consumers, the main components of scale are calcium, magnesium composition, water heater, gas water heater, boiling water device scaling will cause water heater liner corrosion, the pre-filter can prevent the combination of calcium and magnesium ions and silver carbonate ions, so as to play a role in scale inhibition, and can form a nano-level protective film on the inner wall of the water storage tank, which plays a role in preventing and repairing the rust of the inner wall of pipes and containers.

Water purifier pre-filtration? It can be used as a pre-processor for water purifiers.

The preprocessors commonly used in general water purifiers are PP cotton, and their filtration accuracy is claimed to be between 1 and 50 microns. The main thing is to prolong the service life of the rear filter element, because the replacement frequency is too high and the filter element can not achieve backwashing, its function has a tendency to be replaced by the pre-filter.

The water purifier is installed in the kitchen, and the water released by the water purifier can also be boiled and drunk, but the water released by the water purifier belongs to mineral water and contains certain minerals, so after boiling, some precipitation can still be seen.

The pre-filter is installed in the water meter of the inlet pipeline, the household water is coarsely filtered, and the role of protecting the household water equipment is generally 5-70 microns, and the filtration effect of more than 100 m accuracy is not very obvious, Lanze L-30Pa pre-filter has a filtration accuracy of 40 microns, a flow rate of 3 tons per hour, and a backwash function, which is very suitable for families.

According to the working principle, the pre-filter can be divided into laminated filter, down-flush filter, siphon filter, backwash filter, and floor heating pre-filter. According to the working principle, the most suitable pre-filter for household use at present should be the backwash filter. The working principle of the backwash filter of Lanzer pre-filter L-30PA L-30PB L-30PC is:

When the filter needs to flush the retentate, the water flow can be reversed manually or automatically by adjusting the reversing multi-way valve of the filter itself, so that the raw water flow flows from the water purification side of the filter screen (core) to the raw water side, so as to achieve the purpose of backflushing. Compared with other types of products, the backwash filter flushing design is reasonable"Forward and reverse flushing are as you like"The impurities are completely washed out to eliminate the secondary pollution caused by the accumulation of impurities.

The pre-filter mainly plays the role of a coarse filter, and the mainstream pre-filter on the market is still made of stainless steel filter screen. Lanzer Canada's pre-filters are made of 304 food-grade stainless steel, and the quality is trustworthy. Because the pre-filter intercepts large particles of impurities, it is easy to accumulate pollutants in areas with poor water quality, so in the process of use, it is necessary to pay attention to opening the sewage outlet in time to discharge the sewage so as not to affect the use of the product.

The most essential difference between the two is the difference in function, one is coarse filtration, and the other is fine filtration. The water filtered by the pre-filter cannot be used for drinking water, but it can be used as domestic water. The water purified by the water purifier can not only be used as domestic water, but also as direct drinking water to drink.

The pre-filter is the front-end equipment installed in the water pipeline, so it is called the front-end filter, which is the first rough filtration equipment for the tap water of the whole house, mainly the sediment, rust and large particles of matter in the filter. It is thanks to the first rough filtration that the faucets and concealed pipes are not clogged with sediment and rust.

The water purifier is different, it is to filter the water filtered out by the pre-filter and filter it again, so as to meet the standard of domestic water and direct drinking water.

The pre-filter plays a significant role in improving the water quality of the whole house, and it is precisely because of the first filtration process that the water purifier can purify the water source more finely, so that the water quality in the whole house can meet the drinking standard.