The Nikon D80 LCD screen has 14 highlights, how to deal with it

As far as I know, it's too late for you to change your phone, and you've already come over to cover the three-month replacement period.

If there are fourteen as you said (excluding the thought factor), a friend of mine who specializes in camera sales said that changing the screen is negotiable. Generally speaking, it's still very good to change a screen. Returning to the factory for a new one is no different.

Hope you are all the best...

As long as it is not caused by human operation, you can replace the LCD as long as you confirm that there are more than 3 of them and that they are not caused by human causes. As for the CCD, one bright spot is not up to standard, so there is no way to replace it.

There is such an unwritten rule on the LCD screen, there are 3 highlights that belong to qualified products, but in Area A (** area) can not have bright spots, your camera belongs to a serious quality problem, if it is licensed with a formal invoice, it can be free of charge in Nikon's special maintenance to replace the LCD, hey, if you find it earlier, you can change it within 3 months!

Actually, it doesn't matter, just PS in the later stage.

The number of LCD highlights is regulated by the state, and your number has obviously exceeded the standard, and it should be able to be replaced free of charge during the warranty period. The CCD is not called a bright spot, it is called a bad pixel, if it is really a bad pixel, then there is no way but to make do with it, you can use the all-black reference map to shield the dead pixels. It's in the camera!

LCD highlights are no way to buy should be carefully looked at.

There is a bright spot in the CCD, which can only be relied on in the later stage.

And unless you buy it and it turns out that the CCD has a dead pixel on the spot.

Otherwise, there is only one bad pixel and it is unlikely that you will be replaced.

Definitely not ... It's been a long time.

The LCD screen must not be replaced if there are bright spots, generally this situation can only be replaced by the merchant at the time of purchase, there is still a possibility at that time, the time is too long, and the screen itself is a consumable product.

Can Nikon D80 be displayed without a lens + display.

Hello, it is a pleasure to serve you and give you the following answer: Nikon D80 does not have a lens, the display can be displayed normally. The reason is that the Nikon D80 has a built-in reflector, which reflects light onto the camera's sensor and works even without a lens attached.

How to solve the group clearance: 1Using the Lens Cap:

In the absence of a lens, the camera's mirrors can be covered with a lens cap to prevent outside light from entering the camera, thus protecting the camera's internal components. 2.Use a hard hat:

A hard hat can be used to protect the camera's sensors and effectively prevent outside light from entering the camera, thus protecting the camera's internal components. Personal tip: When using the Nikon D80 camera, if there is no lens attached, you can use a lens cap or helmet to protect the camera's sensor or the first camera to prevent outside light from entering the camera, thus effectively protecting the camera's internal components.

Summary. Hello dear dear, I'm glad to answer for you, here according to your question, the answer to you is: No, Nikon D80 can't work without a lens and a display, because it needs a lens to focus the image and a display to display the image.

Without the lens and display attached, the Nikon D80 will not work properly and will not be able to display images.

Can Nikon D80 be displayed without a lens + display.

Hello dear dear, I'm glad to answer for you, here according to your question, the answer to you is: No, Nikon D80 can't work without a lens and a display, because it needs a lens to focus the image and a display to display the image. Without the lens and display attached, the Nikon D80 will not work properly and will not be able to display images.

Take a look. This f--is not that there is no lens installed and the display cannot display the real-time picture?

Yes dear. What lens is this Nikon D80 suitable for buying.

You can buy this AF-S DX NIKKOR 18-140MM F ED VR;

Good. Uh-huh.

Summary. Hello dear, it is a pleasure to serve you <>

The Nikon D80 can't display the screen without a lens display, because the D80 uses a CCD sensor. This kind of image sensor is easy to burn out because of the high heat generation when it is sensitive. Therefore, the manufacturer did not set the live view function on the D80, so it can only be seen with an optical viewfinder when shooting.

Nikon D80 does not mount the lens is not the display screen can not display the picture.

Hello dear, it is a pleasure to serve you <>

The Nikon D80 can't display the screen without a lens display, because the D80 uses a CCD sensor. This kind of image sensor is easy to burn out because of the high heat generation when it is sensitive. Therefore, the manufacturer did not set the live view function on the D80, so it can only be seen with an optical viewfinder when shooting.

The Nikon D80 is a popular DSLR camera. Although it has been on the market for a long time, its sales volume and popularity value are very high. Nikon's lens is a lens featuring a built-in quiet wave motor and VR vibration absorption.

When mounted on any DX-format Nikon DSR camera, the angle of view is equivalent to 24 to 24 for a 35mm film camera or a Nikon FX camera. The Nikon D80 inherits Nikon's consistent design style in terms of appearance, drawing on the successful experience of D200 and D70S and D50, and is similar to Nikon D70S in terms of body workmanship and materials, with a more solid and heavy feel, and the volume and storage system refer to the design of Nikon D50. The sleeve is equipped with a longer focal length than the predecessor D70S, and it is the same product as the predecessor D70S.

If you attach the lens, you can display the screen.

I bought the lens.

Yes, install a lens that is not damaged, and you can display the picture.

Good. How to clean the reflector if there is dust on it.

It is not recommended to clean up the dust on the reflector, but you need to buy tools to clean it up, and you need to prepare 75 content alcohol, cotton swabs, camera cleaning sticks, and air blowers.

Good. Using the air blowing in the cleaning tool, the function of the air blowing is to blow off the floating ash with the force of the wind. Uh-huh.

Display size inches.

Pixels and types Inch 230,000 pixel TFT LCD screen, 170-degree viewing angle rotatable LCD screen No viewfinder optics.

Viewfinder Description Viewfinder Model : Fixed Eye Level Wuling Lens;

Built-in diopter adjustment ( to +

Viewpoint : Yu.

Focusing Screen: B-type glossy matte focusing screen with overlapping focus area and line grid display as required.

Viewfinder covers the frame Magnification : Approx. 95% (Vertical & Horizontal) Using a 50mm lens, adjust to infinity and approximate times.

1. First of all, it shows that this is not a problem with the machine. The reason is not clear to the above students, let me explain again, there are two reasons for the bar, one is the problem of alternating current frequency, and the other is the problem that you use LCD viewing, LCD viewfinder is to process the image on the COMS first, and then transfer it to the LCD screen in a digital way, if you use the optical viewfinder above, there must be no problem. Of course, if you use an LCD screen to point at a cold cathode ray tube TV (that is, a traditional bulky TV, non-LED TV), a similar situation will occur.

2. It is impossible to return or exchange goods. Of course, if the seller agrees to return the goods unconditionally, that is a different matter.

3. It will not affect the recording effect, as for why your camera will not have a similar situation, it is estimated that it is processed on the CCD sensor or image processing circuit.

4. Regardless of whether there is such a strip displayed on the LCD screen, it will not affect the shooting effect.

It's not the camera's problem, it's the differential shooting effect caused by the scanning frequency of the lamp and the display using alternating current (50Hz), which has no effect on **.

It's not a fuselage problem. It's caused by lamps.

It will affect the video effect, and the solution is to change the light.

It's good to use a filter socket indoors, which I have encountered in the past and solved it with this method.